1968 baldwin motion camaro
 

Hello I am looking for pixs of the black 1968 baldwin motion phase III camaro used in the baldwin motion adds. It is black with a white skunk stripe, stinger hood & no front bumper. any pixs would greatly be appreciated thanks steven

Re: 1968 baldwin motion camaro
 

This is the only color photo I've seen. It's the cover from the 10/68 issue of Speed and Supercar magazine. (See attachment.)

Re: 1968 baldwin motion camaro
 

thanks for the fast reply & the awsome pix.

Re: 1968 baldwin motion camaro
 

Looks green to me.


Jason

Re: 1968 baldwin motion camaro
 

Rear view in black-and-white.

Re: 1968 baldwin motion camaro
 

Left front.

Re: 1968 baldwin motion camaro
 

Right front.

Re: 1968 baldwin motion camaro
 

Powerplant. In this case an L88.

Re: 1968 baldwin motion camaro
 

Did they use L-88's or that Corvette Stinger hood on the '67 Baldwin-Motion Camaros?

Re: 1968 baldwin motion camaro
 

I think they used the stinger hood and then the L88 was used in 69

Re: 1968 baldwin motion camaro
 

I have looked around and seen '68s with L-88s. Any pics of a '67 Baldwin-Motion would be appreciated especially with the Stinger hood.

Re: 1968 baldwin motion camaro
 

Motion did several '68s with L88s.



[ QUOTE ]
Any pics of a '67 Baldwin-Motion would be appreciated especially with the Stinger hood.

[/ QUOTE ]

How many would you like? https://www.yenko.net/ubbthreads/imag...mlins/grin.gif
https://www.yenko.net/attachments/145...4-Scan0022.JPG

Re: 1968 baldwin motion camaro
 

https://www.yenko.net/attachments/145...otion_1-vi.JPG

Re: 1968 baldwin motion camaro
 

https://www.yenko.net/attachments/145...hev67SS427.JPG

Re: 1968 baldwin motion camaro
 

https://www.yenko.net/attachments/145..._67_Camaro.JPG

Re: 1968 baldwin motion camaro
 

https://www.yenko.net/attachments/145956-File0014.JPG

Re: 1968 baldwin motion camaro
 

Not to hijack this thread too much, but, has anyone seen a Motion 427 Chevy II? It is listed on the window of the Motion showroom as being availabe. That had to be one of the wildest/scariest combos.

Re: 1968 baldwin motion camaro
 

Yeah I'll post a picture of one later unless someone beats me to it.

Re: 1968 baldwin motion camaro
 

[ QUOTE ]
It is listed on the window of the Motion showroom as being availabe. That had to be one of the wildest/scariest combos.

[/ QUOTE ]

Note that the showroom window advertizes the '68 cars, even though those guys are posing with a '67. I don't think Motion converted any '67 Chevy IIs to big-block power. Anyone know?

Note too the application of "4 2 7" numerals on the Stinger on the '67 in the dealership street photo.

That '67 RS/SS with the '65-'66 SS 3-bar wheelcovers is too cool! Also looks to have '67 SS 427 Impala displacement emblems on the fenders.

Re: 1968 baldwin motion camaro
 

I don't think Motion built '67 Chevy II either. I was referring to the '68. You had to do a LOT of work to fit a big block in a '67 Nova. With the '68 Chevy II Nova right around the corner and being a bolt in for the 427 like the Camaro, I doubt they wasted their time on such a labor intensive swap the '67 Nova would've been back then.

Re: 1968 baldwin motion camaro
 

Based on conversations with Joel Rosen and Marty Schorr there were VERY few '67 BM cars period. A couple of Camaros and a single Chevelle are all that are known to have been built. In fact, I am only aware of a single documented '67 BM car that has been found. https://www.yenko.net/ubbthreads/imag...lins/smile.gif Anyone know of others?

Re: 1968 baldwin motion camaro
 

[ QUOTE ]
In fact, I am only aware of a single documented '67 BM car that has been found.

[/ QUOTE ]

How about an update on that B-M '67 Chevelle??? https://www.yenko.net/ubbthreads/imag...ns/naughty.gif

Re: 1968 baldwin motion camaro
 

[ QUOTE ]
Based on conversations with Joel Rosen and Marty Schorr there were VERY few '67 BM cars period. A couple of Camaros and a single Chevelle are all that are known to have been built. In fact, I am only aware of a single documented '67 BM car that has been found. https://www.yenko.net/ubbthreads/imag...lins/smile.gif Anyone know of others?

[/ QUOTE ]

There is a '67 427 Chevelle with a tunnel ram and sheet metal hood scoop also, but I think it may just be a Motion only car.

Here is a couple of the '68 B/M SS427 Chevy II https://www.yenko.net/ubbthreads/imag...mlins/grin.gif
https://www.yenko.net/attachments/146160-68mnov-2.JPG

Re: 1968 baldwin motion camaro
 

https://www.yenko.net/attachments/146162-68mnov-11.JPG

Re: 1968 baldwin motion camaro
 

https://www.yenko.net/attachments/146163-68mnov-1.JPG

Re: 1968 baldwin motion camaro
 

The '67 BM Chevelle with the sheet metal hood scoop and tunnel ram is my car. If you look on this site in the "Baldwin Motion" topic section for the post of when I purchased the car, the magazines are listed that show the evolution of the car from an 11.50 sec new BM Chevelle to a 10 sec. street strip car a year later.

Nothing new on the car other than collecting parts. I have two cars undergoing frame-off restos and believe me that is plenty. I hope to get the resto of the Chevelle started in '06.

Re: 1968 baldwin motion camaro
 

[ QUOTE ]
The '67 BM Chevelle with the sheet metal hood scoop and tunnel ram is my car. If you look on this site in the "Baldwin Motion" topic section for the post of when I purchased the car, the magazines are listed that show the evolution of the car from an 11.50 sec new BM Chevelle to a 10 sec. street strip car a year later.

Nothing new on the car other than collecting parts. I have two cars undergoing frame-off restos and believe me that is plenty. I hope to get the resto of the Chevelle started in '06.

[/ QUOTE ]

https://www.yenko.net/ubbthreads/show...0/fpart/1/vc/1

Re: 1968 baldwin motion camaro
 

[ QUOTE ]
The '67 BM Chevelle with the sheet metal hood scoop and tunnel ram is my car. If you look on this site in the "Baldwin Motion" topic section for the post of when I purchased the car, the magazines are listed that show the evolution of the car from an 11.50 sec new BM Chevelle to a 10 sec. street strip car a year later.

Nothing new on the car other than collecting parts. I have two cars undergoing frame-off restos and believe me that is plenty. I hope to get the resto of the Chevelle started in '06.

[/ QUOTE ]

That's right. I forgot all about that. Thanks for the reminder. https://www.yenko.net/ubbthreads/imag...iggthumpup.gif COPO do you have any new pics of your car out of the trailer? What's it looking like these days?

Re: 1968 baldwin motion camaro
 

[ QUOTE ]
Hello I am looking for pixs of the black 1968 baldwin motion phase III camaro used in the baldwin motion adds. It is black with a white skunk stripe, stinger hood & no front bumper. any pixs would greatly be appreciated thanks steven

[/ QUOTE ]

Steven, check out this thread...

https://www.yenko.net/ubbthreads/show.../page/2#122072