1969 NOVA SHIFTER FOR M-21
 

LOOKING FOR A ORIGINAL MUNCIE SHIFTER FOR MY NOVA 396/375 I BELIEVE A HURST COMP SHIFTER WILL ALSO FIT EITHER ONE .THANKS RALPH

Re: 1969 NOVA SHIFTER FOR M-21
 

Ralph, you can buy a Hurst Competition Plus shifter and the install kit, they still make them. Make sure you specify bench or bucket w/console. The oem Muncie shifters were junk, but if you want to be tricky get an old muncie handle cut and fit to hurst shifter. That way you have the best of both.Tom https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: 1969 NOVA SHIFTER FOR M-21
 

Shame on you Tom!!! The complete OEM Muncie shifters are getting very difficult to find. Hacking one to adapt the handle to a modern Hurst is simply a waste of original parts!

Best bet is to buy a current Hurst from any Speed Shop and enjoy "rowing" the 4-speed. https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: 1969 NOVA SHIFTER FOR M-21
 

Let me rephrase to calm the purists. If you should happen to come across a spare Muncie handle, weather beaten and worn, then use it to make a hybrid if that suits your fancy. Naturally it would be a sin to deface an original part from the GM assembly line, saints forgive me. https://www.yenko.net/ubbthreads/imag...ns/worship.gif https://www.yenko.net/ubbthreads/imag...ns/naughty.gif

Re: 1969 NOVA SHIFTER FOR M-21
 

Wilma: when I get my Yenko Chevelle to that point, I'd like follow your lead on the shifter. Have any trouble grafting the handle on? Seem sturdy??

Re: 1969 NOVA SHIFTER FOR M-21
 

Rob it's easy....just cut and weld...I did it to a 66 Chevelle set-up (sorry)

Re: 1969 NOVA SHIFTER FOR M-21
 

[ QUOTE ]
Naturally it would be a sin to deface an original part from the GM assembly line, saints forgive me. https://www.yenko.net/ubbthreads/imag...ns/worship.gif https://www.yenko.net/ubbthreads/imag...ns/naughty.gif

[/ QUOTE ]

Well said and a good lesson for all enthusiasts. Many original / NOS parts are long gone due to misapplication. When possible, preserve or use factory parts on a well deserving car.

By the way Tom.....Enjoy your Berger Car! https://www.yenko.net/ubbthreads/imag...ins/3gears.gif

Re: 1969 NOVA SHIFTER FOR M-21
 

dont cut a 4spd unit ever!


buy a 3spd shifter cut it off take the grinder and cut the same marks on the bottom as the Hurst handle drill two holes bolt on and go bang gears....sorry Craig I know how you feel about the factory shifters but how many 3spd shifters do we need around correctly restored???..
I plan to whack a 3spd model as soon as I find one that is not a total turd.

Re: 1969 NOVA SHIFTER FOR M-21
 

Ah relax..I had to shorten the job done by a previous owner...it stuck up too high !!!

Re: 1969 NOVA SHIFTER FOR M-21
 

I am not going to touch that.....Goodnight! https://www.yenko.net/ubbthreads/imag...mlins/grin.gif

Re: 1969 NOVA SHIFTER FOR M-21
 

https://www.yenko.net/ubbthreads/imag...mlins/haha.gif https://www.yenko.net/ubbthreads/imag...mlins/haha.gif https://www.yenko.net/ubbthreads/imag...mlins/haha.gif https://www.yenko.net/ubbthreads/imag...mlins/haha.gif Please don't look for a picture for your thoughts either...

Re: 1969 NOVA SHIFTER FOR M-21
 

Ralph...I have an original Muncie shifter assembly taken out of a friend of mines 69 SS Nova small block...it should be the same...if interested send me a PM.

Re: 1969 NOVA SHIFTER FOR M-21
 

Jeff.....I'am interested in the Muncie shifter you have. I'am working on a project L79 car.

Please PM me on this site or email me at: [email protected]

Thanks for your help.

Re: 1969 NOVA SHIFTER FOR M-21
 

I have from a 69 Z28 the original shiter assembly and handle for $200.00

Re: 1969 NOVA SHIFTER FOR M-21
 

ok guys relax find me a shifter,
thanks
RALPH

Re: 1969 NOVA SHIFTER FOR M-21
 

Ralph, I have several Hurst shifters that would fit your car if interested...Crash
[email protected]

Re: 1969 NOVA SHIFTER FOR M-21
 

i am interested please let me know the price and condition
thanks
RALPH

Re: 1969 NOVA SHIFTER FOR M-21
 

Ralph, I have some real nice used Hurst shifters for 1969-70 Nova. $160.00 w/o console,,,$185.00 w/console plus $20.00 shipping...these are complete shifters with new bushings and clips, nice chrome handle, but no shift ball...Crash

Re: 1969 NOVA SHIFTER FOR M-21
 

Rods too?

Re: 1969 NOVA SHIFTER FOR M-21
 

Yes, rods,levers,mount,shifter body, and chrome handle, but no shift ball...Crash

Re: 1969 NOVA SHIFTER FOR M-21
 

IM INTERESTED IN THE ONE WITH THE CONSOLE LET ME KNOW WHERE TO SEND THE MONEY
THANKS
RALPH

Re: 1969 NOVA SHIFTER FOR M-21
 

Craig
You have a 68 L-79 nova?

Re: 1969 NOVA SHIFTER FOR M-21
 

Ralph, E-mail me at [email protected] ...Crash