Anyone know this car?
 

Either the cowtag has been changed or this car has really changed..
http://cgi.ebay.com/ebaymotors/ws/eB...;category=6161
Sam

Re: Anyone know this car?
 

The cool part is if you look at that L88 engine stamping it looks like it has a cars vin stamped also. I wonder where that car is................

Re: Anyone know this car?
 

I saw that too. Looks like a nice assembly stamp and ID number stamp. Broach looks good, also. Some car may be missing its L88 motor.

Re: Anyone know this car?
 

In the photo of the engine compartment...it appears to have a Big Block heater core ( which could have been added )
...and in the top left corner ...is that a bracket for a/c? https://www.yenko.net/ubbthreads/imag...lins/dunno.gif
...but looks like it could be a fun car https://www.yenko.net/ubbthreads/imag...ins/3gears.gif

Re: Anyone know this car?
 

That assembly code appears to be "IU" and if memory serves me right that denoted 1967 (and maybe 1968) L71/L89. 1967-68 L88 used an "IT" assembly code.
Also, the first digit of the VIN derivative (year designation) looks to be a "4". https://www.yenko.net/ubbthreads/imag...s/confused.gif

Re: Anyone know this car?
 

It looks like "IU" engine code, but the VIN looks like 18S(or 5)41xxxx.

Re: Anyone know this car?
 

IU comes back as 67 and 68 435 hp with Aluminum heads and Manual Trans...need to find out the car is belongs to.

Re: Anyone know this car?
 

It must have had A/C at one time. Look at the dash and you see the vents. 67's didn't have astro-ventilation so the vents are for the A/C system.

Re: Anyone know this car?
 

Another factory small-block car, trying to be a converted engine Supercar. The owner must not know that converted engine Camaro's, etc, were not vin# stamped, on the other hand, maybe he does know! https://www.yenko.net/ubbthreads/imag...s/rolleyes.gif
That would be great to find the original Corvette this L-71 came out of.

One question guys.....what is this owner tring to make this car out to be, a B/M, Yenko, or Nickey? He doesn't mention any of these Supercar names in the Ebay listing.

Re: Anyone know this car?
 

Jeff 18S would be right for a 68 corvette

Re: Anyone know this car?
 

I looked at a few 68 Corvette VIN's and they are in the 8S4xxxxx range as well so it sure looks like that engine is from a 68 Vette.

Re: Anyone know this car?
 

I don't think he's saying anything about being a supercar. He states the original motor and parts go with the car. The motor is a 350 that looks correct I think the car is a steal. https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: Anyone know this car?
 

That's exactly what he's said in his add. "Converted" it's a clone. It would be a fun driver & I like it too https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

Re: Anyone know this car?
 

OK, I didn't know which direction the seller was going with the car. I thought he might be trying to pass it off as an original "converted" 427 car from B/M, Dana, or Yenko.

Someone is going to get a good buy on the car, especially when the original "numbers matching" 350 comes with it. https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

Re: Anyone know this car?
 

[ QUOTE ]
I looked at a few 68 Corvette VIN's and they are in the 8S4xxxxx range as well so it sure looks like that engine is from a 68 Vette.

[/ QUOTE ]
Here are the full numbers sent by the owner of the car via e-mail...Hopefully the guy who owns the vette that this motor came out of see's this...Im thinking of bringing this one home...Anyone near there to take a look at it? https://www.yenko.net/ubbthreads/imag...lins/beers.gif
Sam
<<<< numbers are TO430IU - 18S418456-BLOCK # 3935139 MANIFOLD # ENDS IN69 AND
CARB # IS 3418 ALL THE PULLYS ARE NOS DEEP GROVE THE CAR IS A REAL SS/RS
HIGH PERFORMANCE WITH A FACTORY TRACTION BAR.>>>