#65 Gibb ZL-1 Hood?
 

Has Anyone ever seen a hood like that anywhere elese? If so... Where?

Re: #65 Gibb ZL-1 Hood?
 

I believe that is Capt. Carl's car.

Re: #65 Gibb ZL-1 Hood?
 

#65 is not one of the Gibb ordered cars. It was sold new at Lavery Chevrolet in Alliance, OH. Maybe Carl can share more info. on his car, and how it was restored to its current appearance.

Re: #65 Gibb ZL-1 Hood?
 

Check out the likeness in the two. Where could someone have gotten this in 1968-69??

Re: #65 Gibb ZL-1 Hood?
 

it looks like a Moroso scoop. They were sold as complete hood and as just scoop

Re: #65 Gibb ZL-1 Hood?
 

where could you have gotten the fiberglass front end as well??

Re: #65 Gibb ZL-1 Hood?
 

Many companies made that type of hood scoop. It was referred to as a "Bauman scoop" because of the "Bauman layer" -some physics priciple that helped design it. It was also affectionatly called a Sox & Martin scoop or Mopar scoop because so many Mopar guys ran it. A&A made one as well as Fiberglass Trends as well as many others I'm sure. Probably came out in early '70. Never really seen one before that in any of the publications. Grumpy started to run one on his '70's Camaro. Very popular in the early to mid '70's.

Re: #65 Gibb ZL-1 Hood?
 

Whitetop to the rescue once again !

Re: #65 Gibb ZL-1 Hood?
 

I am just trying to find out info on this car...it has been sitting for about 20 some odd years and we dont know anything about the car other then it has a fiberglass front end. and a 69' 427 stamped (3963512. the car has very low miles. the odometer says 111. i have lots more pics if anyonewants to see

Re: #65 Gibb ZL-1 Hood?
 

Sure, bring on the pics [img]/ubbthreads/images/graemlins/biggthumpup.gif[/img]

Ed

Re: #65 Gibb ZL-1 Hood?
 

Here is the similar hood from a 1971 pic of the #1 ZL1.

Re: #65 Gibb ZL-1 Hood?
 

I'm thinking I've seen this hood on one of the Motion race cars as well. I'm guessing this hood was in production for a while?

Re: #65 Gibb ZL-1 Hood?
 

The one in the second pictire is shaped more like a Bill Jenkins style, Ive seen those called a Grump Lump. But Bill used them with an opening at the base of the windshield, not in front like that one.

Re: #65 Gibb ZL-1 Hood?
 

That is a '71 Mopar style Prostock scoop. First seen I believe on the Motown Missile from Ted Spehar's shop in Detroit. Frank

Re: #65 Gibb ZL-1 Hood?
 

68 Top Stocks pic has a "Grump Lump" scoop. Jenkins used it on his first prostock car. Frank

Re: #65 Gibb ZL-1 Hood?
 

I remember a picture of Grumpy's 68 Camaro with a hand made alum sheet stock scoop pop rivited along the seems. It may have been the prototype of the glass Grump Lump as the shape and size was the same.

Re: #65 Gibb ZL-1 Hood?
 

The scoop on top of Zl-1 #1 in 68topstocks pic was made by Anderson Industries (AI)in Maryland. They were the only ones making the grump lump scoop with the raised center hump straight down through the middle-similar to what's down the center of a stock 67-69 Camaro hood. It is barely noticable in the pic but it's there. I have seen it in other pics of the same car.
I have an old AI catalog from early '70's and they sold lots of one piece and sectional front ends, hoods and fenders for race cars. Later they got into street rod bodies.
AI still sells this grump lump scoop alone or attached to any fiberglass hood they sell. Part # TR-7 for the scoop. IMO, does not look good on a car unless the car hood has the raised hump in the middle i.e. would look out of place on a flat hood Nova. Company is now called Rod & Race fiberglass I believe.
Dave

Re: #65 Gibb ZL-1 Hood?
 

this hood is pop rivited around the seam.

Re: #65 Gibb ZL-1 Hood?
 

L72Camaro68
Most "add on" scoops were pop riveted to a steel hood. The scoop on your car did not see production until late'70 to early '71. I have an A&A ad that shows your scoop and it says "New For '71". Cap't Carls car you are referring to originaly had a "Grump Lump" scoop and later a snorkel scoop. The hood currently on his car was taken from another car. What Joe was refering to pop riveted is the actual construction of the scoop on Grumpys original prototype "Grump Lump" scoop. The sides and top etc were held together by pop rivets.
Dave

Re: #65 Gibb ZL-1 Hood?
 

Maxi and Mini [img]/ubbthreads/images/graemlins/biggthumpup.gif[/img]

Re: #65 Gibb ZL-1 Hood?
 

copo9566aa,
Luv those old ads------ [img]/ubbthreads/images/graemlins/biggthumpup.gif[/img]

Re: #65 Gibb ZL-1 Hood?
 

Me too [img]/ubbthreads/images/graemlins/biggthumpup.gif[/img]

Re: #65 Gibb ZL-1 Hood?
 

Hello FPCOPO: Was that the Black and Gold Challenger that Don Carlton drove? It was a very sharp looking car. One of the first to run a Lenco trans? Thanks