1967 Camaro Power Booster Parts
 

I am looking to finish off my 1967 Power Booster. I am looking for a 3 dot check valve. An 11/32 vacuum hose with no markings. And 2 vacuum hose clamps with square tangs/tabs.

Thanks in advance.

I Will Do some Digging for the Three Dot, For the Hose I use this source:
https://www.deadnutson.com/1970-brak...e-w-clamps-kv/

The Clamps are tough but I search the various meets for OLD hose that then have the square ear versions.


Jim

Thanks Jim. I purchased the hose this morning.

What does the 67 check valve look like

I "Think" the J50/J52 Comb booster check looks like this for ALL three years:
The AIM is silent (No PN Called out) since this part was supplied with the Delco Booster

We generally call it the "Three Dot" given the concentric rings and 3 molding raised circle "DOTS" on the face.

Ref Photo Lloyds 69Z (*Insanely hard to find in this cond.) [Disregard the Red circling of the tag]

Used valves generally look like this after years of Heat and elements.
I found it impossible to plastic polish the haze from the plastic & accept if the flapper Check valve works.

Photo #1: This is mine off my 68Z
Photo #2: This is what the Rebuilders generally supply (*Service Item)

This is pic of mine. It’s light gray, on a 30 years old ASL restored 9204 booster. Is this the square edge clip your referring to?

Jim,
Thanks for the pictures and information on the 3 Dot Check Valve.
Ken

Richard,
Yes, that is the clamps I am looking for.
Ken

The hose n clamp were on my car when I bought it in 95. Is my light gray plug in thing a repop?

Yes,dated 1994 it looks like.

Hmmm 🤔, learning things about our ole cars everyday. I enjoy it!