69 L78 4 Spd Chevelle intake fitting for brakes
 

I found HBC has fittings, but does this have any extra vacuum ports or just one for the brake booster?

"OLE BLUE".
Feb 69 Baltimore L78 M22.

Looks short

----I just dug two out of my pile. The 1st has a small port directly out of the other side. The 2nd has a small port at about 2 oclock from the big port going to the booster. If this helps you can either one for the shipping....Bill S

Vacuum fitting...
 

Wouldn't the automatic cars have a fitting with 2 connections...one that goes to the modulator and one for the booster??

-wilma

His car is a 4spd like ours. 1 fitting

Additional photo
 

Just providing an additional photo to backup Dave’s response. Single port for 4 speed cars.

Let us know if you need any other details.

Thanks,
Marty

OK now that thats figured out I need the tube and bracket if anyone has a spare

I may have an original one but will have to look tonight.

I checked and it's not here so I must have sold it.

There’s a few variables for this fitting. AC, Auto transmission will add a port or 2.

brake vacuum assembly
 

is this the unit you are looking for ?

its a 4 Speed non air car


pretty much does it have bracket to base of carb?

Bracket must of fallen off at some point in storage, looked in the container it was stored in & could not find the bracket, apologies thanks Marc.

I have this one from a '67 Chevelle, has had some abuse on the top side and clear zinc plated. Do you need an original hose and check valve?