The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Supercar/Musclecar Discussion (https://www.yenko.net/forum/forumdisplay.php?f=79)
-   -   Air filter 1969 z early (https://www.yenko.net/forum/showthread.php?t=177203)

brent396 11-04-2023 05:24 PM

Air filter 1969 z early
 
I have a 1969 z early build 09C 1968 what air filter would be correct square mesh or triangle

Lee Stewart 11-04-2023 06:18 PM

Looks like triangle from these photos:

https://www.motortrend.com/news/vint...d-686f8e67dc16

brent396 11-04-2023 06:34 PM

When did they stop

jeffschevelle 11-04-2023 09:18 PM

That pic looks to me like the diagonal soldered mesh, with square holes. Not the "expanded metal" mesh. Which matches my research. See here:

https://www.yenko.net/forum/showthre...mbossed&page=2

jeffschevelle 11-04-2023 09:20 PM

Those old pics also show a correct BLACK master cylinder too !!

brent396 11-04-2023 11:50 PM

Looks like engine lift brackets painted or natural?

Amusa 11-04-2023 11:55 PM

I guess they stopped

Charley Lillard 11-05-2023 01:06 AM

One pic also shows the one cad plated horn bolt.

brent396 11-06-2023 11:45 PM

Triangle it is then

169indy 11-07-2023 03:28 AM

Quote:

Originally Posted by Charley Lillard (Post 1636348)
One pic also shows the one cad plated horn bolt.

& At some point they ditched the Hood insulation,,,,,
Lots of details

BCreekDave 11-07-2023 12:48 PM

Vigilite on a Z. Couldn't have been many of them made.

Steve Shauger 11-07-2023 01:19 PM

Quote:

Originally Posted by Charley Lillard (Post 1636348)
One pic also shows the one cad plated horn bolt.

The 9B RS/SS L34 you own has two Cad plated with serrated washers!

William 11-07-2023 04:02 PM

1 Attachment(s)
Many years ago, the owner sent copies of the paperwork to the CRG. It was delivered to the Chevrolet Zone Office in LA. The confirmation # on the w/s matched the body number on the tag; visible in one of the photos on the Petersen site. No question it is the HRM/SCG/PHR test car. In one of the photos no longer on the site, the hood pad is still in place. Another photo shows the tail pipes were painted black. Built with '68 rear stripe layout.

Hot Rod had some fun with it, chronicled in the January and May 1969 issues. They milled the heads, rebuilt it with headers, steel flywheel, Schiefer clutch and a scatter shield. Added T-bars, comp plus shifter, slicks, 5.38 gears. Ran a best of 12.73/110 before the rear axle blew.

Apparently cleaned up and later sold as a demo, according to a stamp on the w/s.

Presumedly, all this occurred prior to delivery. The photos show CA Mfg. tags. However, the POP lists a DD of 9/26/68. Based on Chevrolet End of Month records, the car wasn’t yet built. Hmmm…

Doubt there were two built with these options.

CamaroNOS 11-07-2023 05:37 PM

I am not too sure if I can see the entire option list but I do not see the chambered exhaust. Where would that be on the list?

Paul

William 11-07-2023 05:54 PM

Chambered exhaust was not listed on factory documentation because it was standard equipment on L34, L78 and Z/28 until December 4, 1968. Date is from the recall letter sent to owners, not the TSB.

In the May '69 issue of Hot Rod there is a photo of the installation of 5.38 gears. The chambered rear mufflers are seen in the photo.


All times are GMT. The time now is 04:37 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.