looking for a pair of MOOG 6308 springs
 

I am looking to buy a pair of MOOG 6308 front coil springs, if you have a pair or know of a pair please send me a private message, thanks you

What do they fit? ...Joe

From the Moog website

• Chevrolet Nova 1969-1972
  • Chevrolet Nova 1969
  • Chevrolet Nova 1970
  • Chevrolet Nova 1971
  • Chevrolet Nova 1972
• Pontiac Ventura 1971-1972
  • Pontiac Ventura 1971
  • Pontiac Ventura 1972
• Nova1972-1969Front
  Quantity 1 4.1L L6 250cid
  
  ChevroletNova1971-1969Front
  Quantity 1 5.0L V8 307cid
  
  ChevroletNova1970-1969Front
  Quantity 1 2.5L L4 153cid
  
  ChevroletNova1970-1969Front
  Quantity 1 3.8L L6 230cid
  
  PontiacVentura1972-1971Front
  Quantity 1 4.1L L6 250cid

This is what it says on the Moog site; Front Coil Springs - Pair moog-6308 fits these vehicles: Chevrolet Nova 1969 thru 1972 Pontiac Ventura 1971 thru 1972

Thanks. I have some somewhere for a 1969 El Camino ss396 we used to have. Didn't know the number..Joe

Yours aren't going to be correct for a 6 cylinder/small block.

This spring is not available now. I used the 6308 on my 69 Z28 and it sits perfect. About an inch lower than stock. I tried to buy another set last summer and no longer available.

that's why I'm looking

Do you need the specs? I have an old Moog catalog that lists most spring specs. Let me know and I'll post the page that lists the 6308. I used them in many Camaros and Nova's over the years, as Steve stated, the ride height was perfect when the car had a Small Block in it. Let me know.

Bill

Here's a link to a picture I posted in 8/25/2020. The picture is post#28. Notice the gas prices....

https://www.yenko.net/forum/showthre...=spring&page=3

Have you contacted MOOG and asked them what they replaced it with ? Many times they change something a little and give it a new part number. It may be superceded.

Have you thought of contacting Eaton Spring? Perhaps they have the specs for the Moog spring, have a better option, or can make what you want:dunno:

https://www.eatondetroitspring.com/

Tim

still looking for a pair of moog 6308 front coil springs for a 69 camaro. i have heard it well still be some time before they are available, and yes i have checked with Eaton spring about making me a pair but the price would be double to triple what a pair of moogs would cost me.
so i am still looking

any help, need for a 69 z28

Moogs
 

I just installed a pair of these and the z sits to low .Going to add a pair of 1/2 inch rubber spacers to correct them.

Anyone have a pair of moog 6320 coils springs that they would sell me, thanks

ok i found a pair, thanks to all

Springs
 

They sit too low and look terrible

I have a NOS pair of TRW 6310 coil springs to use on my 67 convertible w/v8. Anyone have pics of stance with these?