1969 z28
 

What are your thoughts on this Trim Tag?

https://www.streetsideclassics.com/v...et-camaro-z-28

Rivets indicate it has been off the car. Would prefer a better pic but have reason to question it.

VIN tag has definitely been off the car, dash top replaced. Proceed with caution.

William
Does this help ? I lightened it up a bit.

Not original rivets so I'd have to concur that it's been off the car. I kinda like the color options and interior but then I am biased.

Best pic is straight on. Looks like the characters were lightly sanded to look worn.

Georgeous looking car. Only about 700 builds away from mine. Tag information lines up with mine but as has been mentioned may have been off the car.

It is nice, but I am not buying 1081 miles (believed to be actual) if it needed a full restoration.

It doesn't even have its original rear springs. Lots of incorrect details.

For $183k, they could have at least finished out the ducted hood air cleaner assy to include the flange and the gasket.

The recent Mecum prices are blowing everything out of the water...

That's getting close to $250,000 Canadian dollars. Mucho dinaro. But then a 8 foot 2x6 is now over $10. Used to buy those for $1.50 not that many years ago.

And there is a lot of wood in Prince George to boot.

It has repo rear axle housing weld on spring perches too!

Wrong brake pedal pad, rockers should be painted black for starters. A lot of money with things wrong...

69z
 

Lots wrong with this one . The rear u bolts are handsome

the heater hose nipple on the water pump ... NICE

Plus the water pump is ribbed for your pleasure. ROTFLMAO

Mike!!! are you getting frisky

Sorry I couldn’t help it, just trying to lighten up with everything going on in the world.

Seriously, you would think a car advertised for $182 K US Dollars would not be able to be picked apart.

FWIW, I don’t like the tag .

I read more of the ad and the explanation of low miles. Doesn't appear from the ad that any of the power train is original. Poorly executed "restoration" of a put together car using an old drag car shell.

the vinyl top molding placement looks wrong, too wide of a gap on the sides

Nice passenger side valve cover breather hose, and the "brand new" spare wheel! :thumbsdown:

Thanks for the reply. Any one else have a definitive opinion on the tag?

I do not like the looks of that tag.

Stefano; your pm box is full.

Email [email protected]