![]() |
Vinyl Seat Conditioning
I am looking for some recommendations on how to best clean/preserve vinyl upholstery. I am working on the original vinyl interior on a 70 Chevelle. To clean, I have used a mild soap (Simple Green) and water, which worked quite well but wonder if others have any suggestions that are better. My bigger concern is how best to treat the seats to keep them soft so they don't start cracking and pulling apart at the seams. Thx in advance for your assistance.
Oliver |
Quote:
|
I worry about the waxy buildup with Pledge. I have had great luck with the Meguiar's and 303 products.
https://www.amazon.com/Meguiars-M571...QQJ3CJX8GQ0WS6 https://www.amazon.com/303-Protectan...71520048&psc=1 |
1 Attachment(s)
The only thing I use on the interior is plexi cleaner/ polish. It I’ve never used it on vinyl seats. Using it with a tooth brush and a white wash cloth would prob take years of dirt off.
Novus makes same, and their #2 polish is good for dash plexi (Speedo glass) and plastic chrome. |
Megs makes a killer product for this. When Dave and I bought our former '62 Corvette big tank car, we had outstanding results cleaning the original interior. The door panels, seats and dash saw great results.
Dan |
Thanks for the suggestions everyone. Dan, when you say Megs, am I correct in assuming you mean Meguiars and are you talking about the same product recommended by RPOLS3?
|
I’ve never seen a vinyl dress that’s not like armour all. All that slimy sticky finish you get. If there is something, I’d like to know as well.
|
Following simple green I have had good luck with minks oil or any leather conditioner. Rub it on liberally.
|
I've ordered the Meguiars M5716 and will provide an update once I have tried it. Thx for the feedback
Oliver |
Quote:
Dan |
3 Attachment(s)
Oxiclean (credit - James Groome) and Meguiars.
Before. |
5 Attachment(s)
After
|
Great job Darryl!
|
Thanks. Wait till you see this chevelle I’ve been working on.. if I ever get it finished.
|
303 Aerospace Protectant
5 Attachment(s)
This product is superior to most on the market.
I’ve applied it on the Factory Cordova top and OEM Interior on my ‘65 GTO Survivor. The vinyl (morrokide) interior looks like a New 60’s vehicle. Just the right amount of sheen. CT. |
take a stiff bristled tooth brush heat the handle about 1" back from the head and bend it to an angle, then take some scissors and randomly snip in the bristles so they vary in length by at least the depth of the grain you are trying to clean...
Then you can hold it between your thumb and index finger with the tip of your index finger work in small circles clockwise then again counterclockwise the bristles pick away at the dirt... using anymore pressure rolls the ends of the bristles over and they are rendered pretty much useless... Wipe with a CLEAN white rag and when there is no more brown residue you are done. I don't know that I have ever found TRULY clean interior in a purported "clean" car. I've got one crazier... check out the 69 Camaro dash pad - top directly above the clock or center fuel- https://lh3.googleusercontent.com/pw...-no?authuser=0 |
After cleaning
I use the meguires vinyl and leather conditioner, I dampen a small rag, wipe it on then go back and use a microfiber the color of the interior as wipe down making sure there is nothing "wet" left anywhere, if the vinyl or leather doesn't absorb it I wipe it off, if I need 2 for removal... so be it. If you have really dried out REAL leather you can use mink oil to get some suppleness back into REAL leather. |
2 Attachment(s)
I have tried the Meguiars M5716 on the front seats and have attached a couple pics. It certainly improved the feel of the vinyl and makes it softer, and supple. The first pic is before, the second after. The vinyl has a sheen that it didn't have before. So far, I am pleased but I haven't had time to really work on the interior so don't have a real detailed report, but thought I would provide an update.
|
Many years ago, I, too, was dismayed with the slimy, greasy feel of Armorall. My brother Dan restored his original '70 442 convertible interior by using a vinyl cleaner (Armorall) to remove Armorall Protectant used prior, and then applied STP Son-of-a-Gun protectant with fantastic results. I do not know if it is still being made. No greasy feel!
|
Quote:
Up till now I figured I would not offer up a opinion but since you mentioned it Sun of a Gun is all I have used forever. Grady uses it as well. It is still out there. Thanks Mike JMO |
Mike I have used son of a bitch but I don’t think I’ve used son of a gun.....LOL
|
Damn it Doug beat me to it. :D
|
1 Attachment(s)
Quote:
LOL :headbang: Attachment 177285 |
1 Attachment(s)
we own a pretty successful auto detailing business and the best for vinyl material is this. I use on my Judge and Torino.
https://www.meguiars.com/automotive/...6-152-oz-spray |
----Had to go on E-bay yesterday to get Son of a Gun. Bought two! probably won't be around forever.....Bill S
|
Quote:
|
3 ways to Clean Vinyl Seats
1.
Use a specialized cleaner. While the exact technique necessary to clean vinyl seats varies depending on the product you’ve chosen to use, you can generally begin by wiping the seats down with a damp rag, then applying the vinyl cleaner to another clean, damp rag. After that, gently wipe the vinyl cleaning solution across the surface of the vinyl seat. 2. Use an ammonia mix. Mix one tablespoon of ammonia, ¼ cup (59 milliliters) of hydrogen peroxide, and ¾ cup (177 milliliters) of water. Scrub the vinyl seats with the mixture using a soft-bristled brush or sponge. Dry the vinyl seats by wiping them down with a dry cloth 3. Clean your seats with a bleach mixture. Diluting bleach and water in a 1:1 ratio will yield an effective solution for cleaning vinyl seats. For instance, you might mix two tablespoons of bleach with two tablespoons of water. Dip a cloth, stiff-bristled brush, or sponge in the mixture. Scrub the vinyl seating down, then dry it thoroughly with a dry cloth. Regards, PHP Training in Chennai |
Cleaning them and putting a shine on is one thing, I’ve never seen anything to bring back hard old vinyl. At least leather you can bring it back. Has anyone ever saved vinyl, making it soft again? For years Ive searched for nice t top bags, I gave up trying yo make the vinyl soft, I ended up finding a set that was in a closet since 1978. It was soft like new. No matter what I put on the old vinyl it never was “saved”.
|
Darrell, Thank you for the Oxyclean tip. My vinyl top looks exactly like the before pic you posted and I really want it to look like the after picture. I tried other products to get that deep dirt out, but nothing worked that well. How long did it take you to work that roof to get all that dirt out? A few hours? Appreciate your tips.
|
Several hours. Using a hard bristle plastic brush. Keep working on it and it’ll come clean.
|
For scuff marks, especially on lighter colors, Magic Eraser works awesome!
|
I don't know if I can stress how important it is to use minimal pressure in order to ensure that the bristles get into the recesses of the grain WITHOUT rolling the tips over and rendering them quite ineffective.
https://lh3.googleusercontent.com/pw...-no?authuser=0 https://lh3.googleusercontent.com/pw...-no?authuser=0 https://lh3.googleusercontent.com/pw...-no?authuser=0 Dave's old car owned by Evan Metropolis now. This was cleaned with purple power or something pretty strong prior to my arrival. https://lh3.googleusercontent.com/pw...-no?authuser=0 https://lh3.googleusercontent.com/pw...-no?authuser=0 https://lh3.googleusercontent.com/pw...-no?authuser=0 |
All times are GMT. The time now is 11:59 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.