Fan Clutch, Brake Master Cylinder
 

Looking for a couple of parts for my 09D COPO:
Eaton CZ fan clutch
US master cylinder and lid - 245 to 265 date range

Adding a few parts....
 

Also looking for:
assembly line correct hold down bolt for the top of alternator heater hose bracket
Day 2 air shocks
Day 2 distributor

Call me when you can regarding the fan clutch. Doug
614-203-1272

ttt
 

Still looking for the following for my 09D COPO:
Eaton CZ fan clutch
US 309 master cylinder and lid - 245 to 265 date range
Day 2 air shocks
no spoiler trunk lid - late design (no rust repair needed)

When you call, we can talk about the fan clutch...Joe

TTT & added a few items....

Still looking for the following for my 09D COPO:
Eaton CZ fan clutch
US 309 master cylinder and lid - 190 to 265 date range
Day 2 air shocks
Mallory Ramcharger plug wires
no spoiler trunk lid - late design (no rust repair needed)
Wiper panel
Radiator fan shroud
Starter

Believe I have a set of plug wires.

PM'd you

I may have a trunk lid. Call me tomorrow

Still looking for all items on the list other than the 309 master cylinder. Got that but still need a lid and bales.

TTT updated list as I've sourced a few items thanks to some members.....

Still looking for the following for my 09D COPO:
Day 2 air shocks
no spoiler trunk lid - late design (no rust repair needed)
Wiper panel
Starter

TTT updated list as I've sourced a few items thanks to some members and have a few new items needed:

Still looking for the following for my 09D COPO:
Day 2 air shocks
Fly eye air cleaner
1108418 Starter
driver door glass - clear LOF dated AV, TV, IV, or UV
bumper jack assembly
lower alternator bracket
4 speed pedals
shift rods & levers - big block

TTT updated list as I've sourced a few items thanks to some members and have a few new items needed:

Still looking for the following for my 09D COPO:
Day 2 air shocks
Sun blue line ammeter 2 5/8"
1108418 Starter
bumper jack assembly
lower alternator bracket

whats the date range you need for your 418 starter ?

I found a July unit but would be interested if you had a August or September date.

Finally was able to look at the 418 starters i had, 9-G-8 / 9-B-6 / 9-C-20 to early for your's sorry. Whats the code on your cast iron 3 bolt starter nose section ?

Back TTT....the "still need" list is shrinking. Getting down to the wire so let's focus our attention on some good vintage Day 2 air shocks. Hurst, Delco, Hijackers, Jac Pac etc. Anyone have something they would part with?

Is that a 619 fan shroud that you need?

I found an assembly line unit - thanks.
Jim

Found an NOS set of Hijackers on ebay. Both are dated 1970 - perfect fit for my car!

I believe that I have all the main stuff I need. Thanks to all who contributed to my part accumulation!