The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Lounge (https://www.yenko.net/forum/forumdisplay.php?f=87)
-   -   Merry Christmas To Me! (https://www.yenko.net/forum/showthread.php?t=140335)

CC Rider 12-05-2016 04:53 PM

Merry Christmas To Me!
 
Guess what came today!

https://youtu.be/V8F8Uwi5zu4

[img]<<GRAEMLIN_URL>>/3gears.gif[/img]

SS427 12-05-2016 05:16 PM

Re: Merry Christmas To Me!
 
Sweet! All of us FB fans were wondering. Nice looking big block car.

427425 12-05-2016 05:37 PM

Re: Merry Christmas To Me!
 
Nice looking/sounding car Rick. Congrats on the sale, see you at the Pavilions

novadude 12-05-2016 06:03 PM

Re: Merry Christmas To Me!
 
What part of the country is this car from? There was one that looked a lot like this on the local Craigslist in PA not long ago.

70 Forest Green Zee 12-05-2016 06:19 PM

Re: Merry Christmas To Me!
 
you gonna send it to Kwhiz for an LS transplant???

CC Rider 12-05-2016 08:00 PM

Re: Merry Christmas To Me!
 
Thanks everyone.

It is a Southgate built Caprice that stayed in California until 2013. A friend of a friend in PA (yes, this was on Craigslist) acquired it and wrenched on it for while.

mssl72 12-05-2016 08:36 PM

Re: Merry Christmas To Me!
 
Looks and sounds great Rick! Also cool to see another '66 Caprice!!
Post some more pictures too.

CC Rider 12-05-2016 10:17 PM

Re: Merry Christmas To Me!
 
Thanks Mark,

I just want to clean it up and &quot;make it mine&quot;. But I do have two cell phone pics, one featuring my finger. [img]<<GRAEMLIN_URL>>/no.gif[/img]

Bill Pritchard 12-05-2016 11:19 PM

Re: Merry Christmas To Me!
 
Very nice! That Impala must have made a believer out of you.

I see you used McCollister's for transport. They were the United Van Lines franchise that we used to move from IL to AZ. Great service with no problems at all....hope your experience with them was as good.

CC Rider 12-06-2016 01:57 PM

Re: Merry Christmas To Me!
 
Thanks Bill.

There turn around time was great. Communication was good too.

CC Rider 12-06-2016 02:03 PM

Re: Merry Christmas To Me!
 
https://www.yenko.net/ubbthreads/pics...205_090949.jpg
https://www.yenko.net/ubbthreads/pics...205_200458.jpg

I started with detailing the trunk area last night. Got to start somewhere. https://www.yenko.net/ubbthreads/pics...205_093116.jpg

It's a tight fit, but I can walk around it.

x77-69z28 12-06-2016 02:47 PM

Re: Merry Christmas To Me!
 
Love it! Great color combo, and it sounds awesome!!
Buddy

ne70ss 12-06-2016 06:44 PM

Re: Merry Christmas To Me!
 
Nice

Xplantdad 12-06-2016 07:09 PM

Re: Merry Christmas To Me!
 
Gotta change your screen name now 69SUPERSPORT396 to 66CAPRICE427? (And change your signature pic, too?) [img]<<GRAEMLIN_URL>>/grin.gif[/img]

CC Rider 12-06-2016 08:42 PM

Re: Merry Christmas To Me!
 
Thank you!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Xplantdad</div><div class="ubbcode-body">Gotta change your screen name now 69SUPERSPORT396 to 66CAPRICE427? (And change your signature pic, too?) [img]<<GRAEMLIN_URL>>/grin.gif[/img] </div></div>

Can that be done?

galveston 12-06-2016 10:37 PM

Re: Merry Christmas To Me!
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Xplantdad</div><div class="ubbcode-body">Gotta change your screen name now 69SUPERSPORT396 to 66CAPRICE427? (And change your signature pic, too?) [img]<<GRAEMLIN_URL>>/grin.gif[/img] </div></div>


Maybe it should be: &quot;BIGCARCLOSETGUY&quot; ...... just sayin now that your &quot;out&quot;.

CC Rider 12-06-2016 10:44 PM

Re: Merry Christmas To Me!
 
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: galveston</div><div class="ubbcode-body">Maybe it should be: &quot;BIGCARCLOSETGUY&quot; ...... just sayin now that your &quot;out&quot;.
</div></div>

Yes, you did say that Saturday at Pavilions.

Donnie 12-07-2016 12:03 AM

Re: Merry Christmas To Me!
 
Rick, is there an owners manual with the car?

if not I still have the original one in the plastic from my 66 that I wrecked 31 years ago.

Postsedan 12-07-2016 12:31 AM

Re: Merry Christmas To Me!
 
Congrats Rick [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]

Dan

Woj 12-07-2016 12:34 AM

Re: Merry Christmas To Me!
 
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: galveston</div><div class="ubbcode-body">
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Xplantdad</div><div class="ubbcode-body">Gotta change your screen name now 69SUPERSPORT396 to 66CAPRICE427? (And change your signature pic, too?) [img]<<GRAEMLIN_URL>>/grin.gif[/img] </div></div>


Maybe it should be: &quot;BIGCARCLOSETGUY&quot; ...... just sayin now that your &quot;out&quot;.
</div></div>

Shaaawing! .. Very funny Shaun!! LMAO.

Woj 12-07-2016 12:35 AM

Re: Merry Christmas To Me!
 
Got to be careful Rick. These full size beauties can be addicting!!!

Enjoy.

Xplantdad 12-07-2016 12:39 AM

Re: Merry Christmas To Me!
 
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 69SUPERSPORT396</div><div class="ubbcode-body">Thank you!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Xplantdad</div><div class="ubbcode-body">Gotta change your screen name now 69SUPERSPORT396 to 66CAPRICE427? (And change your signature pic, too?) [img]<<GRAEMLIN_URL>>/grin.gif[/img] </div></div>

Can that be done?
</div></div>

I am sure it can...Just gotta find that Charley guy..... [img]<<GRAEMLIN_URL>>/hmmm.gif[/img] [img]<<GRAEMLIN_URL>>/dunno.gif[/img]

Tenney 12-07-2016 04:21 AM

Re: Merry Christmas To Me!
 
Looks the bidness (and makes the right racket!) - good score!! [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img] [img]<<GRAEMLIN_URL>>/burnout.gif[/img]

CC Rider 12-07-2016 05:05 AM

Re: Merry Christmas To Me!
 
Thanks everyone!

Bryan and I went for a quick ride tonight. This car is a beast! The 4.10's make it MOVE! I love how the turbo 400 shifts. But it does rev pretty high at 55. It does not have a tach.

Tonight I removed the front bumper assembly, separated the valence, and will drop it off tomorrow for an application of correct color. Fixed an inoperable tail light socket and installed a bulb in the HVAC control panel. Sure is tight behind that dash with all of that AC stuff.

Going to detail the interior next.

CC Rider 12-07-2016 05:06 AM

Re: Merry Christmas To Me!
 
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Donnie</div><div class="ubbcode-body">Rick, is there an owners manual with the car?

if not I still have the original one in the plastic from my 66 that I wrecked 31 years ago. </div></div>

Nothing was I the glove box. I'll buy your owner's manual.

mssl72 12-07-2016 05:14 AM

Re: Merry Christmas To Me!
 
Nice it has 4.10s! That's what my car has too. If they're factory the axle tube should have a DN code stamped on it. I don't like driving mine on the freeway because of the high revs. If I had a 5-speed Muncie it would help. If you're looking for a factory tach I can help.

CC Rider 12-07-2016 05:38 AM

Re: Merry Christmas To Me!
 
Next time I raise it off the ground, I'm going to check the axle tube for the axle ratio code.

Tach may be in my future. [img]<<GRAEMLIN_URL>>/cool.gif[/img]

Xplantdad 12-07-2016 12:03 PM

Re: Merry Christmas To Me!
 
And this...is what makes this site the best on the net! [img]<<GRAEMLIN_URL>>/youguysrock.gif[/img]

kwhizz 12-07-2016 08:26 PM

Re: Merry Christmas To Me!
 
Don't forget about changing the steering around to correct the Ackermann issues !!!!

CC Rider 12-07-2016 08:43 PM

Re: Merry Christmas To Me!
 
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: kwhizz</div><div class="ubbcode-body">Don't forget about changing the steering around to correct the Ackermann issues !!!!
</div></div>

I was reading about that on this site and CT. I'm a little confused; do I need a center link AND idler arm AND pittman arm?

Donnie 12-09-2016 12:19 AM

Re: Merry Christmas To Me!
 
Rick, send me your address.
I'm not looking to make money off anyone.

Donnie

kwhizz 12-09-2016 10:46 AM

Re: Merry Christmas To Me!
 
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 69SUPERSPORT396</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: kwhizz</div><div class="ubbcode-body">Don't forget about changing the steering around to correct the Ackermann issues !!!!
</div></div>

I was reading about that on this site and CT. I'm a little confused; do I need a center link AND idler arm AND pittman arm? </div></div>


I learned a little since I did mine..........Basically you just need the 67 Idler Arm assy and a 67 Centerlink, and a 3/8&quot; spacer between the idler arm and frame....You won't believe the difference....adding 67 steering arms and a &quot;67&quot; Pitman arm would bring everything to 67 standards , but it would work either way.....Whatever parts you use.....in assembly.....get the Center link parallel to the front crossmember in both directions and then mount the center link to the frame.........I put the threaded mounting holes in the spacer plate and when everything was in position.........I welded the plate to the frame, then I drilled thru the frame rail and then tapped the thread thru the spacer plate so the bolt was screwed into the frame also......lock washers and lock tight.......Align and you are ready to drive with corrected steering geometry........no more squealing tires or black scrub marks in the drive way..........Don't know how that error got past the suspension guys back then

Look at the difference in the Idler arm pivot points and geometry

http://i13.photobucket.com/albums/a2...0EDF19E067.jpg

CC Rider 12-09-2016 02:43 PM

Re: Merry Christmas To Me!
 
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: kwhizz</div><div class="ubbcode-body">[..get the Center link parallel to the front crossmember in both directions and then mount the center link to the frame.........I put the threaded mounting holes in the spacer plate and when everything was in position......... </div></div>

Thanks Ken,

I followed your explanation until you said to mount the center link to the frame. Do you mean the idler arm? Just want to make sure. Thanks Ken! [img]<<GRAEMLIN_URL>>/beers.gif[/img]

Mr. Chevy 12-09-2016 03:48 PM

Re: Merry Christmas To Me!
 
Nice car Rick... You will love the big car.. I love my 67 Impala.. They are like a &quot;rolling couch&quot; going down the road...

More on that later... [img]<<GRAEMLIN_URL>>/grin.gif[/img]

Rich

kwhizz 12-09-2016 05:40 PM

Re: Merry Christmas To Me!
 
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 69SUPERSPORT396</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: kwhizz</div><div class="ubbcode-body">[..get the Center link parallel to the front crossmember in both directions and then mount the center link to the frame.........I put the threaded mounting holes in the spacer plate and when everything was in position......... </div></div>

Thanks Ken,

I followed your explanation until you said to mount the center link to the frame. Do you mean the idler arm? Just want to make sure. Thanks Ken! [img]<<GRAEMLIN_URL>>/beers.gif[/img] </div></div>


Go by what I mean and not what I say.......LOL.....Yes ....Idler Arm Assy to Frame

Donnie 12-11-2016 06:43 PM

Re: Merry Christmas To Me!
 
I'll send it out Monday Rick.
https://www.yenko.net/ubbthreads/pics...7-img_0315.jpg

CC Rider 12-12-2016 04:13 AM

Re: Merry Christmas To Me!
 
Thanks Donnie! That one looks nice.


All times are GMT. The time now is 07:28 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.