Your Cat D7 need a lift ?
 

This fits in the "Other Muscle". Now that is a winch. Me and one of my idiot friends bought this awhile back. Everybody should have one. https://www.yenko.net/ubbthreads/pics...7-img_0599.jpg
https://www.yenko.net/ubbthreads/pics...8-img_0604.jpg
https://www.yenko.net/ubbthreads/pics...9-img_0600.jpg
https://www.yenko.net/ubbthreads/pics...0-img_0601.jpg
https://www.yenko.net/ubbthreads/pics...1-img_0602.jpg

Re: Your Cat D7 need a lift ?
 

M-60 chassis tank retriever in West German identification...nice!

Re: Your Cat D7 need a lift ?
 

----Ready for survivor judging!.....Bill S

Re: Your Cat D7 need a lift ?
 

It fooled me on the first look.. that is actually a vintage M-74 Tank Retriever. it is updated in the suspension and Boogie wheels but you can see the Sherman tank chassis structure there clear as day.

That is a really neat piece. You locate a turret and a cannon and you have a tank!

Re: Your Cat D7 need a lift ?
 

We have been watching for a turret and cannon. Hard to find in the U.S. but supposedly plenty still in Europe.

Re: Your Cat D7 need a lift ?
 

Re: Your Cat D7 need a lift ?
 

As far as I know this one is still available.

http://www.bronzecannons.net/shermantank.html

Take what you need and get your money 100% back as parts.

This also gets what you need for authenticity for the track and drive line.

Re: Your Cat D7 need a lift ?
 

Yuk, can you imagine working on the track and suspension of that beast.

Re: Your Cat D7 need a lift ?
 

Well the most cost effective way to do it would be to restore it to M4A2 (76) HVSS. That would make it a replica of an "Easy 8". That way he does not need to mess with the track configuration.

Re: Your Cat D7 need a lift ?
 

Now that is cool......ya?

Charley, where do you go for NOS parts for that baby?

Paul

Re: Your Cat D7 need a lift ?
 

Wherever I want !!!!

Re: Your Cat D7 need a lift ?
 

Is this originally a GM built Sherman?

Re: Your Cat D7 need a lift ?
 

I bet you've got Ken (KWHIZZ) thinking that maybe he could use one of those for dropping in the LS motors in all the conversions he does.

Re: Your Cat D7 need a lift ?
 

Yours has the Sherman M4A3-E8 "Easy 8" suspension which would be 1945 vintage. I remember that from building military models back in my youth!

Re: Your Cat D7 need a lift ?
 

Weight: 46.8-tons (42,524-kg)
Length: 26' (7.95-m)
Width: 10' 1” (3.07-m)
Height: 11' 1” (3.37-m)
Crew: 4
Armor:
Hull front: .5” (13-mm)
Turret front: .5” (13-mm)
Weapons:
-Primary
1x .50-cal M2HB machine gun
-Secondary
1x .30-cal M1919A4 machine gun
-Ammunition
352x 40-mm
420x .45-cal
430x .30-cal carbine
Engine: Ford GAA V-8, 450-hp
Power/weight: 9.6-hp/ton
Fuel Capacity: 168-USG (635-l)
Range: 100-miles (160-km)
Speed: 21-mph (34-km/h)


The vehicle being offered, M74 Armored Recovery Vehicle (ARV), serial number 57895, was probably built by Bowden-McLauglin-York (BMY) between 1954 and 1955. It is unrestored and in original condition. It was last used by the West German Army and was part of the Budge Collection. It is still in its original German Army paint. The exterior needs to be cosmetically restored. The vehicle runs and drives well on an auxiliary fuel tank. The roadwheels, tracks and suspension components are good. All driver's controls and instruments are present and functioning. The interior needs cosmetic restoration.

Due to the increase in size of American tanks seen in the early 1950s such as the M26 Pershing and M46/47 Patton series, the U.S. military required a more powerful ARV than the Sherman based M32 series of ARV's. BMY developed a heavy-duty ARV using surplus M4A3 chassis. Designated the M74, the first vehicle was converted in July 1953 with full-scale production starting in February 1954. The conversion work continued until October 1955.

The M74 was built with a recovery winch that had a 90,000-lbs capacity, which was a 30,000-lb increase over the M32. It also added separate tow and lifting winches. To aid in recovery work, a bulldozer blade was added to the front of the hull. It could be lowered to act as an anchor during heavier recovery operations and could also be used as a light bulldozer. Unlike the M32, which used a windlass arrangement to raise and lower the A-frame, the M74's A-frame was hydraulically-operated. Integral stowage bins were added to the hull sides, which greatly increased stowage capacity and accessibility.

The M74 remained in U.S. service until the early 1960s when it was replaced by the M88 series of ARV’s, which were built using M48 Patton tank components.

Re: Your Cat D7 need a lift ?
 

Charley,

I am thinking that the tank had a new motor installed when converted in 1954 then?

Very nice piece either way.... I would think it started life as a late war tank built by GM which was later converted and got a Ford V-8 at that time.

More photos please... Preferably you in the drivers seat!

Re: Your Cat D7 need a lift ?
 

HEAVY METAL it is ...

Re: Your Cat D7 need a lift ?
 

Very impressive history lesson......I am impressed!

Are you the "Jerry M" for certifying WW II vehicles......you realize we will need one soon......lol. I see re-bodied tanks, re-pop trim tags and Chinese crap parts all in the future.....lol. Charley.....you have to protect us from these shananagins.

What do you charge for the service?

Paul

Re: Your Cat D7 need a lift ?
 

Engine is a 1100 cubic inch aluminum Ford V8.

http://www.fordgaaengine.com/https://www.yenko.net/ubbthreads/pics...op_640x447.jpg

Re: Your Cat D7 need a lift ?
 

I actually found two rebuilt carbs for ours on Ebay. They were surplus pieces.

Re: Your Cat D7 need a lift ?
 

Torque MONSTER!!! [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]

Re: Your Cat D7 need a lift ?
 

A stocking stuffer for Charley.

<object width="425" height="350"> <param name="movie" value="https://www.youtube.com/v/6DAGPCNCBSc"></param> <param name="wmode" value="transparent"></param> <embed src="https://www.youtube.com/v/6DAGPCNCBSc" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"> </embed></object>

Re: Your Cat D7 need a lift ?
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Charley Lillard</div><div class="ubbcode-body">Engine is a 1100 cubic inch aluminum Ford V8.

http://www.fordgaaengine.com/https://www.yenko.net/ubbthreads/pics...op_640x447.jpg
</div></div>

Isn't that a Cammer...