67-69 camaro drive shaft
 

Original 67 69 Camaro drive shaft refinished and ready to go measures 503/4 in long $175 https://www.yenko.net/ubbthreads/pics...7-imag1101.jpg
https://www.yenko.net/ubbthreads/pics...8-imag1102.jpg

Re: 67-69 camaro drive shaft
 

PM sent....

Re: 67-69 camaro drive shaft
 

is that 4 spd. or A/T.

Re: 67-69 camaro drive shaft
 

I would say4 speed looks like the 4 speed yoke pictured here from my Chevelle https://www.yenko.net/ubbthreads/pics...5-imag1104.jpg

Re: 67-69 camaro drive shaft
 

Where is that measurement from - to? We found out yesterday that we need one for Ben's Nova, but I'm not sure if a Camaro version will interchange with a Nova.

Re: 67-69 camaro drive shaft
 

That is end to end where the universal joints are Wilma was wondering whether if will fit a nova

Re: 67-69 camaro drive shaft
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: YENKO DEUCE REGISTRY</div><div class="ubbcode-body">Where is that measurement from - to? We found out yesterday that we need one for Ben's Nova, but I'm not sure if a Camaro version will interchange with a Nova. </div></div>

Conventional wisdom would suggest that the 69 Camaro and 69 Chevy II, using the same sub frame and drive train would be the same. The interchange manual says otherwise. 67-8 Camaro use a 50 1/2 in. shaft, 69 uses 49.5 (approx.).
1st chart 69 Camaro, 2nd 69 Nova
http://www.camaros.org/forum/index.php?topic=7861.0;all

Re: 67-69 camaro drive shaft
 

I don't know for sure because the sudden snow prevented any measuring today...but I have been told that; The nova measures 53 3/4 from and to end without the yoke...will try to confirm tomorrow.

tew

Re: 67-69 camaro drive shaft
 

I was thinking first gen camaro is 3&quot; shorter wheelbase than 68 up nova. I recently found the original drive shaft out of my 69 L78 4 speed nova. The drive shaft it self measured 54 1/2

Re: 67-69 camaro drive shaft
 

My 70 Nova glide driveshaft measures 52 3/4 center of joint to center of joint, fwiw.

Re: 67-69 camaro drive shaft
 

So, on Saturday I tried Danny's 67 Camaro d/shaft in Ben's '69 Nova - it was at least 3-4&quot; short. So, I tried to fit an old d/shaft I had intended to use, assuming it's from a Nova and it looks like it will fit. Sorry, I didn't measure either of them, but I still have Danny's in my car and can measure it today if someone needs it. It's from a P/G car....

Re: 67-69 camaro drive shaft
 

On my 71 Nova with the 400TH and later 10 bolt (72 and newer?) -- it measures 51 3/4 inches ... TAZ

Re: 67-69 camaro drive shaft
 

Lowered price $165