Nos chambered exhaust 69 z28
 

Anyone have a nos chambered exhaust system for my 69 z28. I know I've seen them in my past but not recently.

Re: Nos chambered exhaust 69 z28
 

subyman99, you have a PM.

Re: Nos chambered exhaust 69 z28
 

a guy in michigan bought all the tooling and builds them exactly as GM..,maybe better..he actually cares about the quality

Re: Nos chambered exhaust 69 z28
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: marxjunk</div><div class="ubbcode-body">a guy in michigan bought all the tooling and builds them exactly as GM..,maybe better..he actually cares about the quality </div></div> mark, do you have his contact info? Jeff

Re: Nos chambered exhaust 69 z28
 

Re: Nos chambered exhaust 69 z28
 

eBay

Re: Nos chambered exhaust 69 z28
 

Thanks mark!

Re: Nos chambered exhaust 69 z28
 

Are these systems more correct than a Gardner reproduction?

Scott

Re: Nos chambered exhaust 69 z28
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: marxjunk</div><div class="ubbcode-body">a guy in michigan bought all the tooling and builds them exactly as GM..,maybe better..he actually cares about the quality

Are these systems more correct than a Gardner reproduction?</div></div>


i dont know..if gardner brings it to market..its as good or better than OEM..and most always correct as it can be..best of the best

he told me he builds them from GM blueprints where possible and his where as good as GM and those are his words...


ive done business with this guy and have talked to him on the phone more than a few times. He told me his story, and seemed believable..

he made some custom for me for a couple cars and i was very happy..i had a piece of original and the crimps and spacing where right.

he made some for me with 2 1/2 in/out



i am no expert on chambered exhaust..ive had some used stuff..ive had a set for a chevelle and bits and pieces for a camaro..ive never seen a set on a survivor..so i cant give a personal experience of are they better than xxxx

he said walker made them and he had the oportunity to buy the tooling and machinery and did...at one time he was the only guy doing them..i see 3 or 4 other guys, but i wouldnt be surprised if he was doing it for them too..but dont know for sure

email him off the website and call him..hes a good guy and he will answer any question you have...and he's honest enough to tell you if its better or not...or if he is doing it for others...

i dont know him personally..ive just done some business with him..and i recommend him to anyone that asks and everyone seems happy too..

Re: Nos chambered exhaust 69 z28
 

The one forsale on EBay is from Indiana, where is the info for the Michigan guy ?

Re: Nos chambered exhaust 69 z28
 

I think he thought it was Michigan but it's Indiana.

Re: Nos chambered exhaust 69 z28
 

yeah Indiana my mistake

but its the same person..i stated wrong location

Re: Nos chambered exhaust 69 z28
 

You mean this guy here?
http://alancolvin.com/store/chambered-exhaust/

Re: Nos chambered exhaust 69 z28
 

Any of those little guys build a exh more correct than gardener? My one z28 has a Gardner system in it, seemed to be nice but was expensive

Re: Nos chambered exhaust 69 z28
 

if you are asking me i dont know..i never got his last name, if i did, i dont remember..i can look thru some paper work.. but it would be easy to find out..just ask him..


the guy in indiana is the stuff i have used...i havent used anyone elses..

Re: Nos chambered exhaust 69 z28
 

I have a set of 409 or 410 stainless chambered that were supposedly made on the original tooling, at least 20 years ago. I think it has a Cc logo, which someone told me was Alan Colvin. Can anyone confirm that story?

Re: Nos chambered exhaust 69 z28
 

Those were made by Alan.

Re: Nos chambered exhaust 69 z28
 

Thanks. Do you know the grade of stainless?