1970 Chevelle LS6/L78 Throttle Bracket Original GM
 

https://www.yenko.net/ubbthreads/pics...0-100_6269.jpg

Original part $1,500.00 plus shipping

E-mail Tony [email protected]

Re: 1970 Chevelle LS6/L78 Throttle Bracket Original GM
 

Hey Tony
That is a rare as hens teeth orig <span style="font-weight: bold">WOW I AM impressed that you have one </span>
I searched 3 years for an orig one. finally found one on a 1970 ori 396 375 hp Nova.
Talked the orig owner to sell it to me for big money, he capitulated as I was determined.

IT was an orig bracket for a 396 375 hp car and not one for an LS6 as they are both the same number but a little different.
Say hi to Rick for me

Good luck
PJ

Re: 1970 Chevelle LS6/L78 Throttle Bracket Original GM
 

From what I remember the cars built at Norwood and Willow Run in 70 (Camaros and Novas)the brackets were slighty different then the Chevelle version.
Same part different supplier.

Re: 1970 Chevelle LS6/L78 Throttle Bracket Original GM
 

While restoring my Canadian 1970 L78 documented chevelle,I noticed there was a difference
in the accelerator bracket. So I did some research into the difference. I found 10 0rig ls6 documented cars all had the same brackets. I also discovered that the L78 brackets were slightly different and all the L78 brackets were the same. Even I received pics of an Elcamino L78 bracket
and that bracket was the same as all the rest of the L78 brackets.
All were the same number.
Being a tool and die maker the small difference was obvious to me.
I am away on vacation so I cant post the 2 different brackets however this topic I posted pics a few years ago and must still be in the postings.
PJ

Re: 1970 Chevelle LS6/L78 Throttle Bracket Original GM
 

Peter, either you have a car with this bracket in place or you need this bracket for a concourse restoration. If your not going to the next level then a reproduction is an alternative.

Re: 1970 Chevelle LS6/L78 Throttle Bracket Original GM
 

The notch &amp; overhang near the bent tang is the difference.
Read here..
https://www.yenko.net/ubbthreads/ubbt...p;Number=79156

Next here and click on jpegs..
https://www.yenko.net/ubbthreads/ubbt...l78#Post121946

Then read here posted later on..
https://www.yenko.net/ubbthreads/ubbt...4&amp;page=all

Re: 1970 Chevelle LS6/L78 Throttle Bracket Original GM
 

Thanks Rick
PJ

Re: 1970 Chevelle LS6/L78 Throttle Bracket Original GM
 

Interesting. I need to check my Nova.

Re: 1970 Chevelle LS6/L78 Throttle Bracket Original GM
 

That is an insanely nice repop. I imagine that was expensive to produce!

Re: 1970 Chevelle LS6/L78 Throttle Bracket Original GM
 

Here's an NOS sold in 2009

https://www.yenko.net/ubbthreads/pics...121109_032.jpg

Re: 1970 Chevelle LS6/L78 Throttle Bracket Original GM
 

How much did it sell for
PJ




<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: all_about_cars</div><div class="ubbcode-body">Here's an NOS sold in 2009

https://www.yenko.net/ubbthreads/pics...121109_032.jpg
</div></div>

Re: 1970 Chevelle LS6/L78 Throttle Bracket Original GM
 

Real nice work.
hope Chris gets his money back for building the dies.
PJ

Re: 1970 Chevelle LS6/L78 Throttle Bracket Original GM
 

How do I contact Chris for one of the fuel line brackets.

Re: 1970 Chevelle LS6/L78 Throttle Bracket Original GM
 

All very good info and thanks for sharing, but you're killing Mr. Motion's classified part listing. Maybe best to move to technical forum and let the guy sell his part.