![]() |
1969 Camaro Z/28 For Sale Ebay
Found this intriguing but has anyone ever seen a white on white '69 Z?
http://www.ebay.com/itm/Chevrolet-Camaro...=US_Cars_Trucks |
Re: 1969 Camaro Z/28 For Sale Ebay
That car would look better without the stripes. Very sleek white on white.
|
Re: 1969 Camaro Z/28 For Sale Ebay
Like it a lot.
|
Re: 1969 Camaro Z/28 For Sale Ebay
You dont see white Z's very often.
Rich |
Re: 1969 Camaro Z/28 For Sale Ebay
Not much to nit pick.
|
Re: 1969 Camaro Z/28 For Sale Ebay
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Lynn</div><div class="ubbcode-body">Not much to nit pick. </div></div>the only thing is that it would look awesomer RS equipped but that's how it was born
|
Re: 1969 Camaro Z/28 For Sale Ebay
Well, there are a few things to pick at.
I am a little concerned that the expert, Chip Davis (anyone know him?) thinks a trans stamped H30 was assembled August 30. That would be a June 30 built trans, which isn't unusual for an August car, but normally on the early August cars. Still, could be original to the car. Not trying to be "that guy" but the other things that are admittedly nitpicking: -shouldn't have the little vertical stainless bars on the tail lights. -tire sticker in wrong place for Aug car -Should have the mylar vin decal between the two ribs on the driver's door (missing on some 08A cars, but on all --the cars 08B and later). -Shouldn't have chambered exhaust, and didn't from the factory -door latch parts should be painted body color -deck lid bolts should be body color -no posi decal on deck lid -if it is all numbers matching how was it "ordered" with 3.73 gears and now has a 4.10 rear -despite Chip Davis giving a thumbs up to the all original interior, I am pretty sure the door panels are aftermarket (I will issue an apology and ask Charley to delete this post, if an expert here tells me I am wrong). - carb looks like it was shot with Eastwood carb renew (should have sent it to Eric). BTW, I am not sure I am buying the dealer paperwork. for 70k, there ought to be clear pics of the pad stamping, the trans stamp and the rear axle stamp. Car was for sale in 2010 in Louisiana (It was a Camero then) for considerably less: http://www.usedcarsfsbo.com/asp/Item...=1%2F10%2F2012 Amazingly, back in 2004, the car had a CE block, and had been through a color change. I am starting to smell a rat (or at least a bit of a mutt): http://www.camaros.net/forums/showth...=124379n675091 It IS an original trim tag, and appears to be original to the car. So it has that going for it. |
Re: 1969 Camaro Z/28 For Sale Ebay
Lynn, you forgot to mention that the L/H window washer
tube is out of place.... [img]<<GRAEMLIN_URL>>/hmmm.gif[/img] DH [img]<<GRAEMLIN_URL>>/flag.gif[/img] |
Re: 1969 Camaro Z/28 For Sale Ebay
Z28's built after approx June couldn't get steeper gears than 3.73.
|
Re: 1969 Camaro Z/28 For Sale Ebay
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: firstgenaddict</div><div class="ubbcode-body">Z28's built after approx June couldn't get steeper gears than 3.73. </div></div> Unless ordered w/ Copo 9510? [img]<<GRAEMLIN_URL>>/beers.gif[/img] ~ Pete |
Re: 1969 Camaro Z/28 For Sale Ebay
Outstanding work, Lynn.
|
Re: 1969 Camaro Z/28 For Sale Ebay
Lynn, (1 more thing to nitpick) I remember reading somewhere that all '69 Z/28's did not come with a simulated Rosewood steering wheel. A standard steering wheel was on it when it left the factory. Am I wrong on this? Anyone can chime in.
Sal |
Re: 1969 Camaro Z/28 For Sale Ebay
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Dicky</div><div class="ubbcode-body">Lynn, you forgot to mention that the L/H window washer
tube is out of place.... [img]<<GRAEMLIN_URL>>/hmmm.gif[/img] DH [img]<<GRAEMLIN_URL>>/flag.gif[/img] </div></div> Dicky: I was giving a free pass on that (along with the batt and radiator cap) as being easily remedied. |
Re: 1969 Camaro Z/28 For Sale Ebay
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 69VN</div><div class="ubbcode-body">Lynn, (1 more thing to nitpick) I remember reading somewhere that all '69 Z/28's did not come with a simulated Rosewood steering wheel. A standard steering wheel was on it when it left the factory. Am I wrong on this? Anyone can chime in.
Sal </div></div> The rosewood was just an option and available to all models.. Not mandatory. The paperwork is only way to tell if original or not. |
Re: 1969 Camaro Z/28 For Sale Ebay
Engine wiring harness should go over the wiper motor and correct me if I am wrong but isn't the grill emblem too high.
|
Re: 1969 Camaro Z/28 For Sale Ebay
It's too high
|
Re: 1969 Camaro Z/28 For Sale Ebay
I thought the middle of the Z should be centered 3 bars over and 3 bars up. Anyone else agree?
|
Re: 1969 Camaro Z/28 For Sale Ebay
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Lynn</div><div class="ubbcode-body">Well, there are a few things to pick at.
I am a little concerned that the expert, Chip Davis (anyone know him?) thinks a trans stamped H30 was assembled August 30. That would be a June 30 built trans, which isn't unusual for an August car, but normally on the early August cars. Still, could be original to the car. Not trying to be "that guy" but the other things that are admittedly nitpicking: -shouldn't have the little vertical stainless bars on the tail lights. -tire sticker in wrong place for Aug car -Should have the mylar vin decal between the two ribs on the driver's door (missing on some 08A cars, but on all --the cars 08B and -Shouldn't have chambered exhaust, and didn't from the factory -door latch parts should be painted body color -deck lid bolts should be body color -no posi decal on deck lid -if it is all numbers matching how was it "ordered" with 3.73 gears and now has a 4.10 rear -despite Chip Davis giving a thumbs up to the all original interior, I am pretty sure the door panels are aftermarket (I will issue an apology and ask Charley to delete this post, if an expert here tells me I am wrong). - carb looks like it was shot with Eastwood carb renew (should have sent it to Eric). BTW, I am not sure I am buying the dealer paperwork. for 70k, there ought to be clear pics of the pad stamping, the trans stamp and the rear axle stamp. Car was for sale in 2010 in Louisiana (It was a Camero then) for considerably less: http://www.usedcarsfsbo.com/asp/Item...=1%2F10%2F2012 Amazingly, back in 2004, the car had a CE block, and had been through a color change. I am starting to smell a rat (or at least a bit of a mutt): http://www.camaros.net/forums/showth...=124379n675091 It IS an original trim tag, and appears to be original to the car. So it has that going for it. </div></div> Lynn, you spotted everything I did. Also the door latch screws should be body color. I am just not a white gut guy. Chuck (427king) had a white survivor that he was gonna part out because he couldn't get 60k for. With tons of paperwork. |
Re: 1969 Camaro Z/28 For Sale Ebay
My Silver original paint X77 came from the same dealer.
|
Re: 1969 Camaro Z/28 For Sale Ebay
Do you have any dealer paperwork on your car?
|
Re: 1969 Camaro Z/28 For Sale Ebay
Evening folks! Decided to do a little research in an attempt to find my old Z and thought I would run the engine number...V0825DZ. The engine number came off of my Protect-O-Plate which is in my hand as I type. The vin number on this car is definitely not my old Z. Maybe I can track this car down and find out more about the engine number.
|
Re: 1969 Camaro Z/28 For Sale Ebay
The V0825DZ simply means the engine is a 69 302/290hp engine assembled on August 25. There were lots of 302 engines made on that day. It is the vin number that ties each engine to a specific car.
Jason |
Re: 1969 Camaro Z/28 For Sale Ebay
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Lynn</div><div class="ubbcode-body">Do you have any dealer paperwork on your car?</div></div>
No just the POP. |
Re: 1969 Camaro Z/28 For Sale Ebay
SLS,
Can you send me a pic of the protectoplate and I'll see if I know anything about the car. [email protected] |
All times are GMT. The time now is 04:45 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.