![]() |
September 1969 BU coded rear
Looking to purchase a September 69 "BU" or "BV" date coded rear.
|
Re: September 1969 BU coded rear
Not cheap but if nothing closer, I saw this BU Canada ad last night if you want to try him on for dates? Says no US shipping but if what you need, seller may be a site member or one of us up here can help? http://www.kijiji.ca/v-transmission-driv...gationFlag=true [img]<<GRAEMLIN_URL>>/beers.gif[/img] ~ Pete |
Re: September 1969 BU coded rear
Are you looking for a Sept. 68 dated rear for a 69 Camaro or a Sept. 69 dated rear as that would be a really late '69 rear and would probably coded CBU or CBV
|
Re: September 1969 BU coded rear
I have a late car November Z it has a Bu coded rear
|
Re: September 1969 BU coded rear
A late 1969 rear. The car has a 9C build date. I was not aware of the "C" before the BU or BV on the later cars. THANKS FOR ALL THE INPUT, AND OR HELP LOCATING A REAR!
|
Re: September 1969 BU coded rear
Yes the C is stamped about 1-2 fonts to the left of the BU or BV.
|
Re: September 1969 BU coded rear
I have a 10 E car, so it too is pretty late and it has a "C BV" coded rear. I can't recall at what point the "C" was added on the '69 rears but the late cars typically have the "C" in front of the axle code with a spacing as Eddie mentioned.
|
Re: September 1969 BU coded rear
around aug - sept they had the C
we have seen several sept cars, BU. BV and BE's with the C I have also seen a couple of aug cars as well - I do think that was the conversion period (aug) |
Re: September 1969 BU coded rear
My last week sept doesnt have the c
|
Re: September 1969 BU coded rear
Chuck,
very unusual - but not impossible.....would help to look at a pic, as I have a number of guys who claim the same and upon further detail looking, low and behold that is a obscure "C" there.....note hammer marks from the factory. here is my 09D Sept of 69 Z https://www.yenko.net/ubbthreads/pics...3-img_0027.jpg https://www.yenko.net/ubbthreads/pics...4-img_0029.jpg |
Re: September 1969 BU coded rear
Just wondering,are these "C" stamped rearend's 860 castings or are they 341's?
And when did the 860's end? Joe |
Re: September 1969 BU coded rear
Joe,
341 casting from all of my research and pics of these rears 860 ended sometime in Aug of 69 - not saying there could be some in aug - sept, but most I have seen are in that time period. |
Re: September 1969 BU coded rear
That's what I was thinking.
I've had 3-4 of these over the years and figured that with the 1970 model change they were going to change to the 341's housing in the Camaro,and just used the 341's already slated for the "X" body's to get by. |
Re: September 1969 BU coded rear
My 10E Camaro has I-29-9 cast date and it is the later 341 casting and is stamped CBV assembled Oct 10th.
|
Re: September 1969 BU coded rear
that is an I casting you are referring to - right.....looks like a one?
|
Re: September 1969 BU coded rear
Yes, casting date is "Eye" 29-9 September 29, 1969 and assembled October 10, 1969. 341 casting number and CBV coded (4.10) posi.
|
All times are GMT. The time now is 12:17 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.