Z28 valve cover reskinning.
 

Anybody here have it done by anyone other then JM? Just curious what others are charging for reskinning the Z valve covers if there are any. Just shopping for the best deal.

Re: Z28 valve cover reskinning.
 

Flame sprayed aluminum. There should be plenty of places local to you to do it.

Re: Z28 valve cover reskinning.
 

what does jm charge for the reskinning?

Re: Z28 valve cover reskinning.
 

I had Jerry do a set for me a few years ago. Can't remember the price. Wasn't off the wall though.

The reskinned covers look great. Frankly, they look better than originals. I am fine with them looking better; after all, we mostly over restore the crap out of these cars, and I really like looking at a car that looks better then new. No different than "fixing" the crappy gaps when repainting.

There is a very cheap alternative, although I am sure some would consider it "hack". I have used it on several sets as well as an intake, and with the naked eye, you cannot tell the difference between reskinned and engine paint. That's right, engine paint.

The trick is a THOROUGH cleaning (NOT SANDBLASTING) and then use the high heat engine paint and bake it in your oven at 400 degrees for at least an hour.

I use the Duplicoor 500 Degree engine paint. I believe it is called "dull cast aluminum" but don't have the # code handy. Can post tonight if any one is interested. Comes in a rattle can, and sprays on very nice. Use the least amount needed for coverage. Let it dry overnight. Bake in the oven for at least an hour.

The intake and covers in my thread were done this way because I was in a hurry to get this car together. This paint is harder and more durable than the aluminum, even reskinned. No way can anyone looking at that engine tell the difference between reskinned and properly painted and baked.

https://www.yenko.net/ubbthreads/ubbt...opics/527525/2

Re: Z28 valve cover reskinning.
 

Thanks Lynn. No sand blasting. Done plenty of that back in the 80's. Can do a lot of damage blasting the wrong metal. I was told to sandblast the inner frame of a 70 Grand Prix hood, but never did anything like this before. The outer skin looked like it has puffed out. Didn't look pretty.

Re: Z28 valve cover reskinning.
 

I bet many do what you just suggested Lynn. They do look as good as any done like that.

Re: Z28 valve cover reskinning.
 

Jerry charges like $150 bucks... Just send them to him, and the intake while you're at it.

Re: Z28 valve cover reskinning.
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: MosportGreen66</div><div class="ubbcode-body">Jerry charges like $150 bucks... Just send them to him, and the intake while you're at it. </div></div>

I think you are correct Dan. That price rings a bell.

And, for the record, had I not been in a hurry, I probably would have sent these to Jerry, along with the intake.

Re: Z28 valve cover reskinning.
 

Hey Lynn, could you post pics of your motor with intake and valve covers installed?

Thanks,
Dan

Re: Z28 valve cover reskinning.
 

Look at page two of this thread: https://www.yenko.net/ubbthreads/ubbt...opics/527931/2

I have since changed the t-stat housing to an unpainted one.

Re: Z28 valve cover reskinning.
 

I use the Eagle one cast wheel cleaner. I use it on all of the aluminum from intakes to trans casings....Looks like new! 12.00 bux!

Re: Z28 valve cover reskinning.
 

Jerry's work is second to none if you ask me. I like to look at the whole picture before spending the first dime. If you want what you want, you gotta pay the fiddler. I learned many cars and many years ago to &quot;Do it nice NOT twice&quot;. If you want your &quot;Z&quot; looking right, send Jerry the valve covers, intake,---hell send him the booster, M/C, Muncie...... I'm an Olds guy, but I've known him forever and he does what he says. Is he the cheapest, don't know, don't care. I know when I assemble my cars with his stuff I won't be doing it again.

Re: Z28 valve cover reskinning.
 

Hey guys. I ended up sending 2 pairs of the non drippers to Jerry. Here is his reply when I emailed him.

&quot;Just send the valve covers to us. Address on my web site. www.z28camaro.com. It's $95 plus shipping to restore them plus shipping. TAR is running about two weeks right now.

We will send you an invoice when done. You would send a check or money order when you receive the invoice. We don't do credit cards anymore. Hope this works for you.

Thanks,

Jerry&quot;

Probably going to be more on one pair than the other I suspect. One valve cover has rub marks on the inside from rockers or the springs, not sure and has hairline cracks from it showing on the outside.

We shall see.

Re: Z28 valve cover reskinning.
 

Gary, I doubt you'll be sorry with your choice. Kinda interested in your comments when get your stuff back.

Re: Z28 valve cover reskinning.
 

JM did mine, price was reasonable, quick turnaround. $150 sounds about right.