Motion Corvette Traction bar.
 

Does anyone have pictures of the traction bar of Mike Rusden's 1969 Corvette. It was the feature car of August 2003.

Re: Motion Corvette Traction bar.
 

I wish my computer never crashed 2 years ago. I had pictures of a complete Motion traction bar assembly for Corvette that I had for sale. I lost a lot of good reference photos when that computer crashed.

From what I remember about it, all that the bar was made up of was two factory lower strut rods that attached with brackets that were welded to the crossmember and connected to the rear spring retaining bracket.

Re: Motion Corvette Traction bar.
 

I know of two that were used. One is like you are describing but I am looking for a third one. There are tons of pics of everything else. It seems no one likes taking pics of rearends?

Re: Motion Corvette Traction bar.
 

the round bar one was a Traction Master
lakewood and NMW also made them by welded flat stock

That green 482 MP Corvette was not a 1969 build
I think it was built in 1973

search "corvette traction bar" on ebay
there are 3 different ones on there

Re: Motion Corvette Traction bar.
 

Are these the "flat bar stock" bars that you're talking about? I took them off of my RS COPO Camaro. They were installed in 1969.

http://i375.photobucket.com/albums/o...0/IMG_1909.jpg

Re: Motion Corvette Traction bar.
 

Better restore them and put them back Bergy!

Re: Motion Corvette Traction bar.
 

Can someone help me with posting a picture?

Re: Motion Corvette Traction bar.
 

Send the pictures to me

[email protected]

Re: Motion Corvette Traction bar.
 

Sorry John, the email went to my junk mail box...

Dan

http://img.photobucket.com/albums/v4...6/003-Copy.jpg

Re: Motion Corvette Traction bar.
 

Thanks Dan for helping to post the picture. I saw the same bar design in two of the Motion parts ads. I do not know who manufactured the bar but I was hoping someone on the site has some pictures of this bar on a documented Motion vette.

Re: Motion Corvette Traction bar.
 

Is this what you're after?
http://i1217.photobucket.com/albums/...g?t=1315834767

Pic from the same Phase 111 car in this thread?
https://www.yenko.net/ubbthreads/ubbt...934&page=1

I saw some pics of a car somewhere online recently that had Traction-Action bars , looked like the one Bergy posted and were yellow w/ the T/A decals.
Don't recall the color but think it was a '70 Z28 and a Nickey car maybe?


[img]<<GRAEMLIN_URL>>/beers.gif[/img]
~ Pete

Re: Motion Corvette Traction bar.
 

Pete- What car is that from. Never saw a Motion car with air bags? However, Thank you for your post but I am looking for rearend traction bars on documented Motion cars.Thanks John

Re: Motion Corvette Traction bar.
 

John, don't miss the link in the 2'nd paragraph I noted above.
Again I think the pic is from this same car, a documented Motion Phase-3 'Vette.


[img]<<GRAEMLIN_URL>>/beers.gif[/img]
~ Pete

Re: Motion Corvette Traction bar.
 

looks like an ET traction bar

I have a set of them for 67-69 Camaro and has the same main bar design - 2 parallel bars but joined in the center

Motion also sold ET bars as seen in their catolog

can you tell what color is the original paint on that bar?

Re: Motion Corvette Traction bar.
 

Original color is white on the bar. ET really, thanks of the info.

Re: Motion Corvette Traction bar.
 

my ET bars are also white with a red and black Eastern Tool decal

Re: Motion Corvette Traction bar.
 

From Dave Belk's 1972 Baldwin Motion Corvette

http://img.photobucket.com/albums/v4...avesVette1.jpg

http://img.photobucket.com/albums/v4...esVette2-1.jpg

Re: Motion Corvette Traction bar.
 

And a again from John...

http://img.photobucket.com/albums/v4...6/DSC00552.jpg

Re: Motion Corvette Traction bar.
 

This is a picture of the car that I found in Bay Shore LI. Wish the owner had paperwork with the picture. However I can not wait to fix a couple of things and then run it through the gears.

Re: Motion Corvette Traction bar.
 

That car looks So Tuff. Did the owner say Joel did the work or did he buy it that way. Any story ?

Re: Motion Corvette Traction bar.
 

The last owner purchased the car over 25 years ago like it is. In the picture you cannot see the GT gas cap on the car. Unfortunately he does not have paperwork with the car. The car was in storage for sometime and with a charger it started right up. Plus it sounds better then it looks.

Re: Motion Corvette Traction bar.
 

Here's my NOS Lakewood traction bar for Corvette.
http://i263.photobucket.com/albums/i...6/IMAG0902.jpghttp://i263.photobucket.com/albums/i...6/IMAG0903.jpghttp://i263.photobucket.com/albums/i...6/IMAG0904.jpghttp://i263.photobucket.com/albums/i...6/IMAG0905.jpghttp://i263.photobucket.com/albums/i...6/IMAG0906.jpg