Help IDing some wheels please
 

I find no casting or stampings on these wheels. Chevy 4 and 3/4 bolt pattern, 14x6 pair and 15x6 pair, each with a 3 inch back spacing. Any help is appreciated. https://www.yenko.net/ubbthreads/imag...lins/beers.gif

http://img.photobucket.com/albums/v6...ls/Wheels1.jpg
http://img.photobucket.com/albums/v6...els/Wheel4.jpg
http://img.photobucket.com/albums/v6...els/Wheel2.jpg
http://img.photobucket.com/albums/v6...ndDec09065.jpg
http://img.photobucket.com/albums/v6...ndDec09064.jpg

Re: Help IDing some wheels please
 

Sam, I don't have a clue, https://www.yenko.net/ubbthreads/imag...lins/dunno.gif but those are great looking wheels. What are they going on?

Grady https://www.yenko.net/ubbthreads/imag...ns/burnout.gif

Re: Help IDing some wheels please
 

Hey Grady,

Not sure yet, but think they will look good on something around here! https://www.yenko.net/ubbthreads/imag...mlins/hmmm.gif https://www.yenko.net/ubbthreads/imag...ns/naughty.gif https://www.yenko.net/ubbthreads/imag...mlins/grin.gif

Re: Help IDing some wheels please
 

The ones with the bigger flange look like some "Crestlines" that I have.

Re: Help IDing some wheels please
 

I think the ones with 'JAPAN' cast on the back are Appliance.

Re: Help IDing some wheels please
 

-----Tony,,,I must be going blind as I cant see Japan cast in any of these wheels. Good looking set though. https://www.yenko.net/ubbthreads/imag...mlins/cool.gif.......Bill S

Re: Help IDing some wheels please
 

Thanks for inputs so far fellas. Whatcha seein' there Tony? I am in process of buying these wheels so I do not have them in front of me, but can not see the "made in Japan" cast?

Anyone else have an idea on the make of these wheels? Probably 2 different manufacturers. https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: Help IDing some wheels please
 

The 15" ones do look like Appliance wheels I have seen. Both on the back side and the way the lugs are is. I've heard the Appliance wheels were made in Japan and should have that cast into them. I would look them over closely for the Japan cast.

Certainly two different manufacturer's and two different styles of lugs.

Re: Help IDing some wheels please
 

Take a look at this web-site. Lots of wheel info there.


http://www.roadsters.com/wheels/

Re: Help IDing some wheels please
 

American Torq Thrust knock-offs. Nice peaked spoke wheels like the Original TTs. I have a couple of pairs of knock-off wheels but no set of four that match. I DO have six original TTs, all are 14x7s.
One of my non TT wheels is very similar to those 15s. I haven't found any markings that indicate a manufacturer.
If you search through the thread here you'll soon see how difficult it is to pin down a certain wheel if it doesn't have the manufacturer's name cast into it.
BTW, I'd snap them up if they're even remotely reasonable. I'm not extra-wild about the wide flange on the 14s but those 15s are sweet! Get rid of the glossy gray paint and they'll look great.

Sam,
Next to last picture; bottom of the wheel "JAPAN".

Re: Help IDing some wheels please
 

Yep DC, I got my eyes to focus on that "Japan". These are back in Pgh so My sis will have to pick them up for me. Then off for restoration.

Thanks to Pete for the heads up! https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: Help IDing some wheels please
 

Thttps://www.yenko.net/ubbthreads/imag...emlins/eek.gifhttps://www.yenko.net/ubbthreads/imag...emlins/eek.gif Chttps://www.yenko.net/ubbthreads/imag...lins/drool.gifhttps://www.yenko.net/ubbthreads/imag...lins/drool.gifL!!!

Glad you got 'em Sam!.

https://www.yenko.net/ubbthreads/imag...lins/beers.gif
~ Pete

Re: Help IDing some wheels please
 

They are actually pretty easy to restore if you have a nice cabinet blaster.

Re: Help IDing some wheels please
 

[ QUOTE ]
Next to last picture; bottom of the wheel "JAPAN".

[/ QUOTE ]

OK, now I think you guys are just making stuff up to make us old guys believe we are blind. Or, maybe I am blind. All caps? Upside down? Next to last pic, correct? I can't see any letters or numbers.

Re: Help IDing some wheels please
 

------Dennis,,,You Da Man!!! https://www.yenko.net/ubbthreads/imag...mlins/flag.gif I looked and looked and didnt see that "JAPAN". Thanks, Im not crazy,,,,,,Totally........Bill S

Re: Help IDing some wheels please
 

Got the cabinet but not the lathe to turn the wheels. What is your process Smokey?

Re: Help IDing some wheels please
 

http://i710.photobucket.com/albums/w...PxTx/japan.jpg

[ QUOTE ]
[ QUOTE ]
Next to last picture; bottom of the wheel "JAPAN".

[/ QUOTE ]

OK, now I think you guys are just making stuff up to make us old guys believe we are blind. Or, maybe I am blind. All caps? Upside down? Next to last pic, correct? I can't see any letters or numbers.

[/ QUOTE ]

Re: Help IDing some wheels please
 

Sand paper, 80, 120, 180 grit sanding stones from McMaster Carr, and a pair of jackstands. It sounds hackish but it works.

Re: Help IDing some wheels please
 

Thanks. I was looking in the wrong place.