1969 L78 Oil Pressure wire clip
 

Does anyone have one or knows of who re-pops the small clip that holds the oil pressure wire on the Drivers Side.

I`ll see if I can dig up a picture of one.

Thanks,
Dan.

Re: 1969 L78 Oil Pressure wire clip
 

Try Lectric Limited a local company in Brookfield, IL.

www.lectriclimited.com

Re: 1969 L78 Oil Pressure wire clip
 

Let me know if you find one Dan. Thats one of the few items I still need too. I'd like to see a picture, if you have one.

After a year or so, I finally found two nice original air shock hoses, to go with the nos air shocks on the Elky.

Re: 1969 L78 Oil Pressure wire clip
 

They also make the correct temperature sending unit with the threaded post and nut. Got one from Hinshaw's Chevelle in Elon, NC.

Re: 1969 L78 Oil Pressure wire clip
 

[ QUOTE ]
Let me know if you find one Dan. Thats one of the few items I still need too. I'd like to see a picture, if you have one.

After a year or so, I finally found two nice original air shock hoses, to go with the nos air shocks on the Elky.

[/ QUOTE ]

Bill,

I`ll find them and get you one.

http://img.photobucket.com/albums/v6...P1010129-1.jpg

Dan.

Re: 1969 L78 Oil Pressure wire clip
 

Put me down for one as well Dan if you find them. Thanks.

Re: 1969 L78 Oil Pressure wire clip
 

[ QUOTE ]
Put me down for one as well Dan if you find them. Thanks.

[/ QUOTE ]

Don,

You Betcha!

Dan.

Re: 1969 L78 Oil Pressure wire clip
 

Thanks Dan. You da man. I don't care what Wheelhop says, you're a good guy https://www.yenko.net/ubbthreads/imag...emlins/eek.gif

Re: 1969 L78 Oil Pressure wire clip
 

Dan, Try this guy, ebay item no. 120499720013

Grady

Re: 1969 L78 Oil Pressure wire clip
 

BBC Oil Wire Clip

Re: 1969 L78 Oil Pressure wire clip
 

[ QUOTE ]
Dan, Try this guy, ebay item no. 120499720013

Grady

[/ QUOTE ]

http://cgi.ebay.com/ebaymotors/ws/eBayIS...1&viewitem=

Re: 1969 L78 Oil Pressure wire clip
 

[ QUOTE ]
Dan, Try this guy, ebay item no. 120499720013

Grady

[/ QUOTE ]

Grady,

I`m on it, Thanks https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

Dan.

Re: 1969 L78 Oil Pressure wire clip
 

Is that clip for the wire,line,or either? Was it used in 70?

Re: 1969 L78 Oil Pressure wire clip
 

Yes it was used in 1970. This is Mark Mitchell's LS6.

http://i115.photobucket.com/albums/n...n_IMG_3858.jpg

Re: 1969 L78 Oil Pressure wire clip
 

That picture is as pretty to me as Niagara Falls!!

Re: 1969 L78 Oil Pressure wire clip
 

I agree Jim. I was looking at the overspray on Rick's LS-6 restorations, last week at the MCACN show, and picked Ricks brain a bit on how to do it, so it will hold up longer.

I like the clean look, with no overspray, but I like the overspray look too. Enough to pull the motor out and change it? I can see that happening sometime this winter.

Re: 1969 L78 Oil Pressure wire clip
 

[ QUOTE ]
Yes it was used in 1970. This is Mark Mitchell's LS6.

http://i115.photobucket.com/albums/n...n_IMG_3858.jpg

[/ QUOTE ]I have an L-bracket that receives the oil pressure line with a compression fitting. I don't believe the gauge cars use that wire clip.

Re: 1969 L78 Oil Pressure wire clip
 

Me too Thanks Bob https://www.yenko.net/ubbthreads/imag...lins/smile.gif