499 distributor stamp opinion
 

I bought this distributor a while ago and would like to get some opinions on the stamping.
I need a distributor with a May or June date, so I'd be willing to trade this to someone.
TIA

http://i36.photobucket.com/albums/e4...ributor013.jpg

Re: 499 distributor stamp opinion
 

Rick .. to help determine real or not look at the 4 in the 499 if it is real it should have little diamond like spots in all 3 corners. Doug https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: 499 distributor stamp opinion
 

Rick also 8 G18 is a good date I have had one of those dates a while back.

Re: 499 distributor stamp opinion
 

Thanks Doug. https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: 499 distributor stamp opinion
 

Where are the 'Saturn' lines that normally go around the casing? Something doesn't look right to me, but.....

Re: 499 distributor stamp opinion
 

Check the diameter of the housing with a vernier. That will tell you if the O.D. has been machined down.

Re: 499 distributor stamp opinion
 

pic of 499 with lines

http://i617.photobucket.com/albums/t.../tn_4998g9.jpg

Re: 499 distributor stamp opinion
 

The machined finish on ours is more like the one at the top. It has the definite step down about 5.16" from the top as shown on the second one. A good machined finish isn't necessarily typical though from what I have seen.

Re: 499 distributor stamp opinion
 

To be honest, I think that my distributor is a factory restamp. The area that has the numbers is missing the step for the cap, but the rest of the housing has the step.

Now I know that there were some factory engine restamps, so does my theory sound plausible for this distributor?
I've never seen a restamp nowadays that has the correct fonts like this one.

Here's another pic at a slightly different angle.

http://i36.photobucket.com/albums/e4...ributor007.jpg

Re: 499 distributor stamp opinion
 

Any other opinions, good or bad?
PM if you prefer.

Re: 499 distributor stamp opinion
 

I found another distributor that's closer to the date I need, so I will put the August of 68 one up on the shelf for any future projects.

http://i36.photobucket.com/albums/e4...ributor007.jpg

Re: 499 distributor stamp opinion
 

It screams 'restamp' to me.

Re: 499 distributor stamp opinion
 

me too! https://www.yenko.net/ubbthreads/imag...emlins/eek.gif have it checked out.

Re: 499 distributor stamp opinion
 

LOOKS GOOD TO ME IS IT FOR SALE

Re: 499 distributor stamp opinion
 

How about this one? http://good-times.webshots.com/photo...01686729deuRpH

Re: 499 distributor stamp opinion
 

Does anyone else have an 8G18 dated 499 to show a picture of?
I know my 9B12 is an original, but feel the 8G18 was done at the factory as a restamp, not done by some schmo recently.