What oil is best for engine break in????
 

Gonna be breaking in a stock 396/350HP motor w/hydraulic camshaft. I was told by several people that Joe Gibb's "BR" engine oil was the best for engine break in. It is a 15W-50 viscosity and has high levels of zinc and other additives in it for good ring seal and lubrication. I know traditionally high levels of zinc were for the solid lifter motors but I was told it wouldn't hurt my particular application, in fact it would help...

I went to Gibb's website and saw that they also have a "BR 30" which is a 10W-30 viscosity oil and only difference from the regular "BR" was the weight/viscosity.. I am considering the 15W-50 oil over the 10W-30 since the motor is a big block. Any thoughts or ideas what is best or what some of you out there have had good success with????

Thanks.... Rich https://www.yenko.net/ubbthreads/imag...ouguysrock.gif https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: What oil is best for engine break in????
 

HI use 10-30 for break in i heard deisel oil has zinc in it

Re: What oil is best for engine break in????
 

You can't go wrong with the Gibbs oil but it is a bit pricey .Shell Rotella T oil has the ZDDP for now but that will change also .

Re: What oil is best for engine break in????
 

I called Gibbs tech. dept. and they said I would be fine with the 15W-50 "BR" oil.. However, they stated to only run it for 100 miles then empty it out and re-fill with whichever oil I choose to run.. My Choice: Synthetic AMSOIL 20W-50 Racing oil...

Rich

Re: What oil is best for engine break in????
 

This Team Chevelle thread is well worth reading, as far as levels of zddp in different types of oil.
http://www.chevelles.com/forums/showthread.php?t=243928

Spectro makes a high level (1800ppm/zddp)for flat tappet cames. I use it in both my Chevelles. I've heard too many cam failure stories.

Re: What oil is best for engine break in????
 

[ QUOTE ]
You can't go wrong with the Gibbs oil but it is a bit pricey .Shell Rotella T oil has the ZDDP for now but that will change also .

[/ QUOTE ]

Shell has already taken a good portion of the ZDDP out of Rotella starting at the beginning of 2008 when new diesel engine vehicles were required to have a catalytic converter. Shell claims that the new Rotella still has some ZDDP in it but not near as much as the old formulation. The old formula Rotella had an API rating of "CI" and that is the version of Rotella that has the high level of ZDDP...the new formula has an API rating of "CJ" and that formula of the oil is the one that has the reduced levels of ZDDP. Anyone who is thinking of using the new Rotella be aware that the ZDDP level is not near as high as the ZDDP level was prior to 2008.

Re: What oil is best for engine break in????
 

Thank you for that info Forest Green .I did not realise it has already changed .I guess we will have to rely on additives like GM EOS or go with the specialty oils .

Re: What oil is best for engine break in????
 

How's this Penn Grade High Performance Oil----"The Green Oil"---It states it has the Zinc additive for classic cars or racing engines.....? Anybody using this...?

Re: What oil is best for engine break in????
 

I use the old Kendall green oil all the time Joe! Good stuff! I have it mixed to 15W/40.

Re: What oil is best for engine break in????
 

Sounds good Sam............Thanks

Re: What oil is best for engine break in????
 

I will use the Gibbs or Brad Penn oils. I also have been heavily using the VR1 Valvoline Race oil. It has all the additives needed and has never let me down. I also use a bottle of the Comp Cams break in lube. If it is an agressive profile with a lot of spring I will recommend using a bottle with every oil change.

MB

Re: What oil is best for engine break in????
 

VR1 racing is real good too! https://www.yenko.net/ubbthreads/imag...ins/3gears.gif

Re: What oil is best for engine break in????
 

Something else to consider when breaking in cams is to use either just the outter springs [or set of break in springs] and/or a set of break in rockers...

Re: What oil is best for engine break in????
 

I have a question, i have 2 cases of STP racing oil in the paper cans, probably from the late 70's would this oil still be good if it is in a sealed can, for say like a 70 spec LS-6 with factory Mech cam? for break in purposes, i believe it is 50 Wt.

Re: What oil is best for engine break in????
 

Those composite cans,although known to weap over time,still are dependable if stored within reasonable conditions.The oil should be OK.

Re: What oil is best for engine break in????
 

[ QUOTE ]
I have a question, i have 2 cases of STP racing oil in the paper cans, probably from the late 70's would this oil still be good if it is in a sealed can, for say like a 70 spec LS-6 with factory Mech cam? for break in purposes, i believe it is 50 Wt.

[/ QUOTE ]

Want to sell a case I could use it for a display https://www.yenko.net/ubbthreads/imag...mlins/grin.gif

Re: What oil is best for engine break in????
 

Thanks for the replies on the oil, as far as selling a case,i was thinking about it but would really like to use the oil, did you want them with the oil or with out,if you are going to use them for display i guess you could go either way.Please let me know what you think, Beater68427. https://www.yenko.net/ubbthreads/imag...ins/3gears.gif

Re: What oil is best for engine break in????
 

PM sent