The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Technical & Restoration (https://www.yenko.net/forum/forumdisplay.php?f=86)
-   -   Radiator cap restoration (AC) (https://www.yenko.net/forum/showthread.php?t=101604)

mockingbird812 11-07-2008 08:00 AM

Radiator cap restoration (AC)
 
Pirkle does not do them any more. Suggestions https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

Thanks https://www.yenko.net/ubbthreads/imag...lins/beers.gif

http://img.photobucket.com/albums/v6...8/100_0504.jpg

mockingbird812 11-07-2008 08:14 AM

Re: Radiator cap restoration (AC)
 
https://www.yenko.net/ubbthreads/imag...ins/tongue.gif oops https://www.yenko.net/ubbthreads/imag...lins/blush.gif seek and you shall find. This thread from a little over a year gives me some direction. Any other suggestions?

SuperNovaSS 11-07-2008 08:40 AM

Re: Radiator cap restoration (AC)
 
Windex, fine steel wool and stant cap for the new seals, etc.



Jason

396L35 11-07-2008 03:43 PM

Re: Radiator cap restoration (AC)
 
[ QUOTE ]
Windex, fine steel wool and stant cap for the new seals, etc.
Jason

[/ QUOTE ]

Barkeepers Friend and a soft cloth so you dont scratch the surface. You can even sumerge the cap in a bowl of the Barkeepers Friend to loosen up the crap. Here is one I did for a friend. Mark

http://i7.photobucket.com/albums/y29...5/DSC06607.jpg
http://i7.photobucket.com/albums/y29...5/DSC06608.jpg
http://i7.photobucket.com/albums/y29...5/DSC06609.jpg
http://i7.photobucket.com/albums/y29...5/DSC06610.jpg
http://i7.photobucket.com/albums/y29...5/DSC06611.jpg
http://i7.photobucket.com/albums/y29...5/DSC06614.jpg
http://i7.photobucket.com/albums/y29...5/DSC06617.jpg
http://i7.photobucket.com/albums/y29...5/DSC06618.jpg





olredalert 11-07-2008 04:27 PM

Re: Radiator cap restoration (AC)
 
-----Sam,,,Is your cap functioning correctly??? If not I have a friend whos son does complete function and appearance restos on these caps from the Corvette world. I have seen none better. Alot of the high priced caps on E-bay are ones he is selling. I seem to remember that some of the rivet styles are hard to find though. If you want his #, PM me.....Bill S

mockingbird812 11-07-2008 05:03 PM

Re: Radiator cap restoration (AC)
 
Wow - thanks for all of the suggestions (and pictures too). That is an impressive transformation. https://www.yenko.net/ubbthreads/imag...lins/beers.gif

mockingbird812 11-07-2008 05:05 PM

Re: Radiator cap restoration (AC)
 
Bill - I don't have my cap with me now, but will check functionality when I do. PM sent.

firstgenaddict 11-07-2008 07:30 PM

Re: Radiator cap restoration (AC)
 
Has anyone ever tried to Soda blast one?
Redneck had his 81 Z soda blasted and the sheet metal looked like fresh stampings...

mockingbird812 11-07-2008 07:41 PM

Re: Radiator cap restoration (AC)
 
Interesting idea James. I have a car that was b. soda blasted and the metal looks wonderful/smooth. I would be interested in seeing the results with a rad cap too. I would guess favorable results.

Salvatore 11-07-2008 07:48 PM

Re: Radiator cap restoration (AC)
 
Sam, Do it yourself! Just a little elbow grease and some patients. If you don't want to change the seal and it holds pressure you can just clean real good with GO-JO and wipe a thin coating of grease before installation. Most of these cars never run long enough to even build up 125 degrees of pressure. Its fun to do it yourself. Relaxes ones brain a little. https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

firstgenaddict 11-07-2008 10:11 PM

Re: Radiator cap restoration (AC)
 
I would use some safest rust remover and go from there if I didn't go with the soda.

k92 11-09-2008 01:09 AM

Re: Radiator cap restoration (AC)
 
I was referred by someone on this board to a guy who does a lot of corvette stuff. I cant remember his name right now,think he was from New Mexico. He did a really good job on my cap.

mockingbird812 05-27-2009 02:06 AM

Re: Radiator cap restoration (AC)
 
Jason - u mentioned above that you use a new Stant cap for new seals, etc. Can you go thru the procedures to install the new seals. Do you have to dismantle the vintage cap to install the new seals?

Thanks (p.s. your Windex and fine steel wool did the trick!)

SuperNovaSS 05-27-2009 02:26 AM

Re: Radiator cap restoration (AC)
 
Sam,


Its been awhile since I have messed with a mechanical resto on one of these caps. I don't remember how I went about it but I think it involved a stant cap. There was a thread on this a year or two ago. I think it may have been Budnate who was talking about scavenging the yards for these caps and fixing them. I'm glad the windex and steel wool worked out well. I use windex for almost everything, sometimes even glass https://www.yenko.net/ubbthreads/imag...lins/smile.gif


Sorry I could not be more helpful,

Jason

budnate 05-27-2009 04:31 AM

Re: Radiator cap restoration (AC)
 
not me on this one.....I think Drifter is the cat your after...I am sure he will chime in after work, https://www.yenko.net/ubbthreads/imag...lins/beers.gif

juliosz 05-27-2009 05:53 AM

Re: Radiator cap restoration (AC)
 
Here's a before and after pic of the cap off of my 65 vette. The plating was done with a do-it yourself kit (Caswell).

[image]http://i102.photobucket.com/albums/m...j/IMG_1424.jpg[/image] http://i102.photobucket.com/albums/m...p-After002.jpg

P.J. 05-29-2009 05:15 AM

Re: Radiator cap restoration (AC)
 
what kind of plating is it??? Nice Job.
If you need to change the seal and remove the rivet
will you use the same rivet or get a new one some where???
PJ

juliosz 05-29-2009 06:01 AM

Re: Radiator cap restoration (AC)
 
P.J., it's cadmium plated and the aluminum rivet is the original. A member of our local NCRS chapter did it and he's able to mask pieces of the assembly you don't want plated like the rivet. I didn't need to replace any seals on it yet but I plan to use what I can off of a new aftermarket cap.


All times are GMT. The time now is 10:18 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.