Re: Original Yenko Torque Thrust Wheel Size/Back S
 

They are very very similar....in fact in the TT oic I posted...the straight spoke is actually an International Dragmaster.......Bill......68 calipers are harder to fit than 69's...better check them...the 15x7 D's have a very special offset and I am pretty sure they will work on a Camaro but I've never stried...if you look at the picture I posted you can see it's a different offset

Re: Original Yenko Torque Thrust Wheel Size/Back S
 

The person I am buying these from is going to try them on an early Corvette caliper, and then we will try to find a 68 Camaro with the correct calipers in his area to give the wheel a try. If we can't find a 67-68 camaro by him we will ship one wheel to me as a trial to make sure before we ship all of them. I think they will work, but just want to make sure before I get them. I would rather be out a few $ on freight then have 4 wheels I can't use at the moment. I already have too many parts hanging around that I could use someday on something

Re: Original Yenko Torque Thrust Wheel Size/Back S
 

Well, I have finally picked Team III Wheels Classic ET 5 Spokes, due to the straight spoke design and the fact that they seem to be the only manufacture who can make the wheels in the backspacing I need. Unfortunately, they take 6 weeks to get.

If anyone has had negative experience with this company or product, please let me know.

Thanks again for everyone's very informative input.

Keith
AWSM502

Re: Original Yenko Torque Thrust Wheel Size/Back S
 

I agree, the ET straight spokes in the "as-cast" finish look really good. You could probably mount American center caps on them and really throw people for a loop.

https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

Re: Original Yenko Torque Thrust Wheel Size/Back S
 

I just came across this on ebay, it appears that Appliance made there own "D" spoke wheel

http://cgi.ebay.com/ebaymotors/ws/eB...category=34209

In any event I have located a complete set of vintage American D spokes, in the sizes I want, sent the money and am waiting for them to arrive

Re: Original Yenko Torque Thrust Wheel Size/Back S
 

I am reviving this old post as I am just getting around to putting these old torque thrust D's on one of the cars. My question is this. Did the the D's center spokes come painted or were they natural aluminum? If painted does anyone know the correct gray. Also, I need to find the correct metal caps. I am also going to post a photo of what I have (I hope). No luck on the photo as it is too large. Mine have natural (not painted) spokes. Also as to tires I have the repro Good Year E70's but I am thinking about a repro road race tire, if anyone knows if something is available. thanks

Re: Original Yenko Torque Thrust Wheel Size/Back S
 

Here's a photo to go along with the previous post. The plastic caps have to go. I have to try to find some original metal caps. I also like the looks of running them without center caps.

Re: Original Yenko Torque Thrust Wheel Size/Back S
 

Bill are the caps you are using the new plastic ones for the old wheels ? Or the new caps for the new wheels ??? The screw pattern one the latter doesn't line up real good on the old wheels...the metal caps I have are die cast I think and don't have the little ridge where the sticker goes...

Re: Original Yenko Torque Thrust Wheel Size/Back S
 

Belair...I need 2 of the early metal caps like you describe. Are the ones you have for sale?

Re: Original Yenko Torque Thrust Wheel Size/Back S
 

Bob: The caps I have came with the wheels so I don't know exactly what I have. But they line up well so I believe they are new caps for the old wheels. I went through so much trouble and expense to get the real wheels, that plastic caps just are not good enough.