The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Member's Rides (https://www.yenko.net/forum/forumdisplay.php?f=100)
-   -   Grandfather's 68 SS Camaro. (https://www.yenko.net/forum/showthread.php?t=130691)

cook_dw 06-19-2015 06:01 PM

Re: Grandfather's 68 SS Camaro.
 
Is the Chevelle engine using the same cam, heads, intake, exhaust as the Camaro? If not then it needs to be tuned to the engine its bolted to..

SuperNovaSS 06-19-2015 11:21 PM

Re: Grandfather's 68 SS Camaro.
 
Ignition advance not working or vacuum advance hooked up improperly?


Jason

JRC99 06-20-2015 01:12 AM

Re: Grandfather's 68 SS Camaro.
 
I honestly don't know. Cam heads and intake are all different. I'm just trying to find the easy way out. I think I'm going to have to put the Camaro on the back burner while I learn how to do it, because my dad isn't all that good at tuning carbs (his words, not mine).

JRC99 06-20-2015 04:03 AM

Re: Grandfather's 68 SS Camaro.
 
I should note we tried to tune the carb with my grandfather once, but it didn't work very well.

PxTx 06-20-2015 04:25 AM

Re: Grandfather's 68 SS Camaro.
 
Post some data.

Degrees of initial timing at idle without vac adv hooked up?

total timing @ 3000 rpm without vac advance hooked up?

timing at idle with vac advance hooked up?

What pulgs? Plug gap? What distributor? Any ignition box?

JRC99 06-20-2015 04:33 AM

Re: Grandfather's 68 SS Camaro.
 
I'll have to ask. I just know i has an Accel distributor (MSD cap. No ignition box.

JRC99 06-21-2015 12:37 PM

Re: Grandfather's 68 SS Camaro.
 
I found an old distributor in the garage. It has an Accel cap, but apparently it's the original points distributor for the Camaro. Part Number HI HI2168 8b1 (or 3b1, or 3BL, or 8BL, I can't tell). Will this work on a small block. Pappaw said it was big block specific, but I don't know why it would be. He's got a 350 in his garage I plan on using in whatever car I get, and I'd really like to save 200 bucks by using this. (Y'know, so I can put said cash towards a tunnel ram for said 350. [img]<<GRAEMLIN_URL>>/naughty.gif[/img])

68l30 06-22-2015 01:09 PM

Re: Grandfather's 68 SS Camaro.
 
1112168 should be the number on it...350 SBC


BIG

JRC99 06-22-2015 02:05 PM

Re: Grandfather's 68 SS Camaro.
 
Appears to be it. Makes we wonder what it was doing on a 396.

JRC99 06-29-2015 01:06 AM

Re: Grandfather's 68 SS Camaro.
 
http://www.summitracing.com/parts/msd-8910/overview/ Will this work with the Camaro's Accel distributor? I ask because it says it's for MSD Blaster ignition, which the car doesn't have.


All times are GMT. The time now is 08:19 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.