Re: Would this car be considerd a COPO
 

I thought it was something he kept his marbles in---

Re: Would this car be considerd a COPO
 

Phil,
Yes, that is correct. As the car entered the Chevy side, one guy looked at the body # to link the car to the VIN and to the order info and then generate the broadcast sheets.
But otherwise Chevy pretty much ignored the tag. It had no value to them.
[ QUOTE ]
This info also resulted in the printing of the Broadcast Copy essential for body lock and assignment of the VIN number.

[/ QUOTE ]
One clarification: VIN was assigned as the car right as it came to the Chevy side. The linking of the body # and order info didn't generate / affect the VIN assignment.

Re: Would this car be considerd a COPO
 

https://www.yenko.net/ubbthreads/imag...mlins/haha.gif https://www.yenko.net/ubbthreads/imag...mlins/haha.gif https://www.yenko.net/ubbthreads/imag...ns/Charley.gif Someone post a link to the John Z Norwood process....

Re: Would this car be considerd a COPO
 

Go to camaros.org The article is listed under the report section. The First Generation Assembly Process. I tried to paste a link and it did not work. A really comprehensive article that answered
many questions.One question for me was, what was the tape used for that I found under the fender on the passenger side cowl area. Well it was explained in the document: It held the antenna cabling in place, so that the antenna could be easily installed in the fender.

Re: Would this car be considerd a COPO
 

I don't know about other plants, but Oshawa was all one unit. There was no separate Fisher body side. There were two bodyshops, A and B body. The bodies were scheduled and built then sent to the paint shop. They came back to their respective sides of the plant in the general assembly area. Eventually the bodies met the chassis' at the marriage station. The chassis had also been scheduled to be built and meet the body at the same time. Beyond Fisher on blueprints, there was really no connection with Fisher. As a tool and die maker I worked in the bodyshop, General Assembly, or where ever I was needed. The Doraville plant in Atlanta seemed to of a similar setup.

Re: Would this car be considerd a COPO
 

What functions did you perform Keith ? Very interesting stuff..I have an Oshawa 63 Belair

Re: Would this car be considerd a COPO
 

http://www.camaros.org/assemblyprocess.shtml

Keith,
John discusses the change to an integrated plant a little in the first few paragraphs and has posted about that in the past (on camaros.net and on CRG). From what I know, plant setup depended on when you worked there and what division ran the plant. The divided plant was incredibly inefficient.

Re: Would this car be considerd a COPO
 

There's a few posts around here with info from Moparts' dad who worked at the St. Louis plant...Fisher body did from the firewall back, then passed the car through a wall to Chevrolet who took it from there. Pretty wild...

Re: Would this car be considerd a COPO
 

OK My 67 Yenko on the trim tag has 4FK - I started asking about the dash. Nobody knows for sure. I know of 3 67's 375 non Yenko cars that don't have the dash. I know of 3 67 Yenko's that have the dash. I also know of 2 that don't.Yenko I think had ordered several 67's 375 cars at one time. This I think were a fleet order, They have the dashs on them that's all it is not a COPO order. COPO is away to order cars not offered under RPO #s in other words not all dealers could get them. I hope this helps. Kim

Re: Would this car be considerd a COPO
 

That my understanding as well.