The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Chevrolet (https://www.yenko.net/forum/forumdisplay.php?f=124)
-   -   Project: Hot rodding a 69 Nova (https://www.yenko.net/forum/showthread.php?t=121832)

x Baldwin Motion 06-04-2013 02:03 AM

Re: Project: Hot rodding a 69 Nova
 
wow, nice work Bill (but that's to be expected) [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]

Bill Rose 06-07-2013 01:50 AM

Re: Project: Hot rodding a 69 Nova
 
Thanks for the positive feedback folks. I'll keep adding progress pics if anyone is interested.

Lots of progress. I got the majority of the undercoating off. I still have some small areas to clean up a bit more. Mostly it was removed with fire and scraping. Then cleaned it up with a DA, and wire wheel on the grinder. Also used some paint remover in tight areas.

I'm very happy with the condition of the underbody. You never know what you'll find when removing undercoating, but this car was 99% rust free. Just a couple areas of surface rust, which I'll fix with some body work. Also got the firewall stripped. Found a couple numbers under the black paint. Also found big check mark. Not sure what that was for. Here's a few pics.

http://i533.photobucket.com/albums/e...psb59980cc.jpg

http://i533.photobucket.com/albums/e...psfdd068a7.jpg

I still have to remove, and redo the seam sealer.

http://i533.photobucket.com/albums/e...ps3c693272.jpg

Also got these 2 pieces done today.

http://i533.photobucket.com/albums/e...pse28c2f80.jpg

Postsedan 06-07-2013 02:24 AM

Re: Project: Hot rodding a 69 Nova
 
Bill,

You get a BiG Check Mark....Looking Great [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]

http://img.photobucket.com/albums/v6...ps790e1bdb.jpg

Dan

WILMASBOYL78 06-07-2013 12:59 PM

Re: Project: Hot rodding a 69 Nova
 
Nice work Bill....the #65 is for the Olympic Gold paint.

wilma

mockingbird812 06-07-2013 01:29 PM

Re: Project: Hot rodding a 69 Nova
 
[img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img] Love it!

YENKO DEUCE REGISTRY 06-07-2013 02:21 PM

Re: Project: Hot rodding a 69 Nova
 
Nice firewall codes; the 'A' is for the black interior stuff, '65' for the paint, and I'm guessing this is a v/t top car with that giant 'V'??

Bill Rose 06-07-2013 07:38 PM

Re: Project: Hot rodding a 69 Nova
 
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: YENKO DEUCE REGISTRY</div><div class="ubbcode-body">Nice firewall codes; the 'A' is for the black interior stuff, '65' for the paint, and I'm guessing this is a v/t top car with that giant 'V'?? </div></div>

I was wondering what that mark could mean Marlin. Now that you mention it, it does look like a big V. I've never seen this before. I'll probably put the codes back when I'm done, and I should know what the V means. Makes sense to me.

ban617 06-13-2013 03:01 AM

Re: Project: Hot rodding a 69 Nova
 
Hi ,very nice work on the car so far.... I have a couple of questions. Did you replace the a arm bushings and then paint them? What did you coat your drag link with to protect it? Are the washers on the upper a-arms bare metal or painted black ?
Thanks Rob

Bill Rose 06-19-2013 12:48 AM

Re: Project: Hot rodding a 69 Nova
 
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ban617</div><div class="ubbcode-body"> Hi ,very nice work on the car so far.... I have a couple of questions. Did you replace the a arm bushings and then paint them? What did you coat your drag link with to protect it? Are the washers on the upper a-arms bare metal or painted black ?
Thanks Rob </div></div>

I prime and paint one coat on the control arms, then install the bushings. Then I mask off the bushings and repaint the black. The drag link has cast iron paint on it. The upper a-arm bushings should be natural or nickel plated. I used a phos paint, but I'll change them before the project is finished.

Bill Rose 06-19-2013 12:48 AM

Re: Project: Hot rodding a 69 Nova
 
It's been a busy couple weeks. Got the rest of the bottom striped of all the undercoating. Then sanded it one last time. Then sand blasted the tight areas, that I couldn't reach with the sander..

Yesterday I stuck the whole thing in the trailer, and took it around the corner to Alberts shop, to prime, and paint the bottom in his spray booth. It came out great. Tomorrow it comes back here, and the Elky goes in the trailer for GM Carlisle. When I get back, I hope to start the assembly process.

I also found a tack that fits the factory dash bezel. I got the dash all cleaned up, and reassembled/ready to go back in the car.

http://i533.photobucket.com/albums/e...ps0440ce7c.jpg

http://i533.photobucket.com/albums/e...ps2994dff7.jpg

http://i533.photobucket.com/albums/e...ps820dc4fa.jpg

http://i533.photobucket.com/albums/e...psd80401ab.jpg


All times are GMT. The time now is 07:24 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.