|
Only a world class craftsman could pull all this off and make it look so easy. My hat is off to you Dave, you're an artist!
|
Very flattering, thank you! I started assembling my “show book” of photos I’ll have printed to have with me. Really neat looking back from the beginning.
BMW Classic Car Club magazine is being printed with my story in it. Will share it here when it comes out! Cheers Dave |
Very cool from the multi-talented Super Dave!:headbang::worship:
|
Thanks Bruce!:BruceRocks:
Cheers Dave |
And to think we raised him on the site......Our baby has grown up !!
|
1 Attachment(s)
Quote:
Attachment 242885 Cheers Dave |
Is that a picture of the 507 on those diapers of yours? Talk about early planning.
|
9 Attachment(s)
Turned my attention to exhaust over the weekend and think it came out OK seeing how I basically just cut and spliced things together. Was a fun project. I didn't want to load the car up and send it to a shop, so I decided to just crawl all over the concrete floor for a few days. Does a back good!:no::biggthumpup:
Attachment 242927 Attachment 242928 Attachment 242929 Attachment 242930 Attachment 242931 Attachment 242932 Attachment 242933 Attachment 242934 Attachment 242935 Just tacked in place for now to make sure it all aligned correctly..... Part Two coming up! Cheers Dave |
8 Attachment(s)
Once everything was lined up I fabbed up an equalizer pipe. I needed to notch it so it would clear the transmission crossmember and allow the trans to come out without having to remove the crossover pipe. Worked out swimmingly!!
Attachment 242936 Attachment 242937 Attachment 242938 Attachment 242939 Attachment 242940 Attachment 242941 Attachment 242942 Attachment 242943 I sprayed everything with high temp aluminum to prevent the flash rust and to get a cleaner look. The mufflers are Jaguar XKE. How will they sound? Beats me! :eek2::confused2: we'll find out soon enough. More to come.... Cheers Dave |
6 Attachment(s)
My 3D printed grilles will have to do for now while I wait for the front surrounds and and side grilles to be finished. The shop is backed up so it might be a while, so might as well throw these in! They don't look half bad for being plastic.
Attachment 242944 Attachment 242945 Attachment 242946 Attachment 242947 Attachment 242948 Attachment 242949 Hood is on and latches are adjusted. Smooth as silk. I need to permanently install the hood release handle bracket next to the parking brake lever next. More to come.... again!! Cheers Dave |
| All times are GMT. The time now is 06:02 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.