Re: Day 2 parts discussion
 

Now where is the other pic that you have of it dancing the front tires off the ground???? [img]<<GRAEMLIN_URL>>/smile.gif[/img]

Re: Day 2 parts discussion
 

http://i411.photobucket.com/albums/p...024_152026.jpg

Re: Day 2 parts discussion
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: [email protected]</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Nova Jed</div><div class="ubbcode-body">OK, so here are some pics of my slapper bars.

[img:center]http://i270.photobucket.com/albums/j...d/100_1625.jpg[/img]

As you can see in the above picture, the leaf is a little bent. It appears that they were mono's that someone added two extra leafs to. The tube measures 1 1/2&quot; square.

[img:center]http://i270.photobucket.com/albums/j...d/100_1624.jpg[/img]

[img:center]http://i270.photobucket.com/albums/j...d/100_1623.jpg[/img] </div></div> Traction bars by JED-I Performance.</div></div>

Don't worry Sammy, I've got some tricks up my sleeve.

Re: Day 2 parts discussion
 

Some thing i found this week .To bad i only got 1 set of 4 ..

http://i263.photobucket.com/albums/i...6/IMAG0602.jpg

Re: Day 2 parts discussion
 

good stuff!

Re: Day 2 parts discussion
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Carleen</div><div class="ubbcode-body">Here is mine

http://i517.photobucket.com/albums/u.../watermark.jpg

7x15 magnesium in front 9.5 back Dragmaster</div></div>

This car looks just like John P's ZL1.

Re: Day 2 parts discussion
 

z28 plate ....http://i263.photobucket.com/albums/i...6/IMAG0619.jpg

Re: Day 2 parts discussion
 

I don't know if this helps anyone out there, but in talking with M H drag tires, they said its becoming popular now to take their vintage tires and have someone put the grooves in them (for day 2 use). Thought I would pass it along. I probably will do this for my gtx when I get around to it.

take with a grain of salt. They said their vintage tires are doing well.

http://www.mandhtires.com/store.php?...mode=cat_click

Re: Day 2 parts discussion
 

Recent garage/barn find.
http://i36.photobucket.com/albums/e4...tercaps006.jpg
http://i36.photobucket.com/albums/e4...tercaps005.jpg

Re: Day 2 parts discussion
 

More from the same barn.
http://i36.photobucket.com/albums/e4...tercaps002.jpg
http://i36.photobucket.com/albums/e4...tercaps001.jpg

Re: Day 2 parts discussion
 

Sweeet caps! Do you know what those ET caps came on? I've seen them before but not on any wheels.

Re: Day 2 parts discussion
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Nova Jed</div><div class="ubbcode-body">Sweeet caps! Do you know what those ET caps came on? I've seen them before but not on any wheels. </div></div>

I think they're from ET five spokes (if my fading memory serves me correctly...L-O-L) -- the chrome ones that looked like Cragars.

Wayne

Re: Day 2 parts discussion
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Nova Jed</div><div class="ubbcode-body">Sweeet caps! Do you know what those ET caps came on? I've seen them before but not on any wheels. </div></div>

Can't say I do know what kind of wheel they came on. They were loose as you see them, and no wheels around that remotely looked like something they came from.

Re: Day 2 parts discussion
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Hotrodsled</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Nova Jed</div><div class="ubbcode-body">Sweeet caps! Do you know what those ET caps came on? I've seen them before but not on any wheels. </div></div>

I think they're from ET five spokes (if my fading memory serves me correctly...L-O-L) -- the chrome ones that looked like Cragars.

Wayne </div></div>

Bingo.

Re: Day 2 parts discussion
 

This site keeps getting better and better.

Re: Day 2 parts discussion
 

In my speed shop, we used to sell ET chrome five spokes as a secondary line to Cragar. At the time, they were cheaper and weren't as nice in terms of quality (today's ET wheels are a different story though...). Some guys tried putting Cragar caps on ET's, but you could always tell the difference.

Eventually, I just quit selling ET wheels altogether.


Wayne

Re: Day 2 parts discussion
 

Seemed like here in the Philly area in the late 1960's Cragar S/S was THE mag wheel to have. Anything else just wasn't seen to be a cool.

Heck, we had Hurst wheels being made here and people just thought they were ugly. Nobody seemed to want to buy, or even steal them (plenty of stories of Hurst equipment headed out the door Johnny Cash style)

Re: Day 2 parts discussion
 

One piece at a time Paul?

Re: Day 2 parts discussion
 

http://i411.photobucket.com/albums/p...IzqY3Q60_3.jpg I wounder who makes them NMW ?

Re: Day 2 parts discussion
 

They just look BAD. *Paul

Re: Day 2 parts discussion
 

Brent, I will have to look at my old catalogs...Might be NMW I'm thinking they might be MAS out of Minneapolis.

Re: Day 2 parts discussion
 

I would like to find a set .I thought NMW were mounted diffrent. Thanks Brent

Re: Day 2 parts discussion
 

A friend of mine has a set of these. I thought they were pretty cool.

http://img.photobucket.com/albums/v2...-22-24_424.jpg


Tommy [img]<<GRAEMLIN_URL>>/3gears.gif[/img]

Re: Day 2 parts discussion
 

Neat stuff Tommy.

Re: Day 2 parts discussion
 

Moroso sbc oil pan old vs new stlye .The more redish http://i411.photobucket.com/albums/p...118_170403.jpg pan with the drain plug in the bottom is old school and the baffle is not the same the newer style has a swinging trap door

Re: Day 2 parts discussion
 

http://i411.photobucket.com/albums/p...118_170435.jpg

Re: Day 2 parts discussion
 

Here is a cool vintage &quot;day 2&quot; Dominator carburetor. Old 1150cfm job painted up with the red white and blue scheme.

-Matt

Re: Day 2 parts discussion
 

Thanks to Fast67/Matt my wife now has these for here 68 440 4speed Dart project .Plus he made finding here the right gift for her birthday easy for me ..Keystone 15x4 with NOS Pro-Trac front runners ..They are killer just need lite cleaning ....http://i263.photobucket.com/albums/i...6/IMAG0622.jpghttp://i263.photobucket.com/albums/i...6/IMAG0623.jpghttp://i263.photobucket.com/albums/i...6/IMAG0624.jpg

Re: Day 2 parts discussion
 

Nice stuff man. Beny has your tires on the front of his COPO in Chicago John. Scat Trac's!!

Re: Day 2 parts discussion
 

I have pictures to prove it.

Re: Day 2 parts discussion
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: [email protected]</div><div class="ubbcode-body">Nice stuff man. Beny has your tires on the front of his COPO in Chicago John. Scat Trac's!!</div></div> Cool glad they went to a good home love to see pictures.

Re: Day 2 parts discussion
 

NADA, they still reside with me. I lent them to him for the Show in Chicago where he did quite well. I had a pair of JC Penney slicks and a JC Penney A/FX helmet in the original box also. He even had a Penney's 1971 catalog on display. Thanks again John.

Re: Day 2 parts discussion
 

Those Keystones are killer.

Re: Day 2 parts discussion
 

Vintage Roto-Faze dual point distributor. Nice West Coast piece circa 1970-1973.

-Matt

Re: Day 2 parts discussion
 

Cool piece. rAdIcAl name!!!!!

Re: Day 2 parts discussion
 

I'm gonna throw this one in! Mostly for our other resident VW nut Chris [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]. This Tach was in the early 70's Autometer catalogs and I happened to find one a few years ago. I'm saving it for that 67 bug I hope to score one of these days.

http://img.photobucket.com/albums/v2...s/IM001947.jpg

http://img.photobucket.com/albums/v2...5753PMvdub.jpg

Tommy [img]<<GRAEMLIN_URL>>/3gears.gif[/img]

Re: Day 2 parts discussion
 

Wow! I love this site. You guys know your stuff. I have a few Day 2 items I can post pictures of. I'll get the camara out and take some shots. Here are a couple of things I have pictures of right now.
Moroso ballast box.

Re: Day 2 parts discussion
 

Rocket Racing BBC timing covers.

Re: Day 2 parts discussion
 

Found this picture of a Vega my friend is building. Gold Cragars on the front.

Re: Day 2 parts discussion
 

Thanks for the tip. I'll do that on my repops.

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: whitetop</div><div class="ubbcode-body">Steve
Krylon #1403 Dull Aluminum is the exact match to the original Cragar paint that was fogged in the lug nut pockets. Only comes in spray cans so you will have to transfer that to an airbrush.

A little bit of paint remover and resprayed would look a lot better than the black. </div></div>