Re: really cool 70 Z28..simply the best.
 

That partial list came from the late Fran P.
I agree,and was hoping maybe JohnZ could shed more light on it.
Charleys plugs look like the real proof in the pudding though.

Re: really cool 70 Z28..simply the best.
 

The same list is in Colvin's book, along with a list of assembly order for Tonawanda. He probably got it from Fran, and its probably from the '70s.

I believe Charley's photos more than I believe that list.

Charley, Rob is probably punishing you for backing out of the moderator job https://www.yenko.net/ubbthreads/imag...ns/naughty.gif https://www.yenko.net/ubbthreads/imag...mlins/haha.gif

Re: really cool 70 Z28..simply the best.
 

[ QUOTE ]
Why yes that is a build sheet under the drivers seat. https://www.yenko.net/attachments/385772-tn_067.JPG

[/ QUOTE ]

Man...this just keeps getting better! https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: really cool 70 Z28..simply the best.
 

And yes I left the sheet there. The odd thing is the sheet is fastened to the spring with a hog ring. The ring is serving no other purpose, just holding the sheet.

Re: really cool 70 Z28..simply the best.
 

Hmmmm, that is strange Charley. I thought the sheets were left in the car due to laziness, not intentionally. Again, thanks for sharing.


Jason

Re: really cool 70 Z28..simply the best.
 

If you look at the opposite spring there is no hog ring at all.

Re: really cool 70 Z28..simply the best.
 

Now that is lazy! https://www.yenko.net/ubbthreads/imag...lins/smile.gif

Re: really cool 70 Z28..simply the best.
 

Jasey...Yes the bracket looks painted with a brush and yes there is orange paint on the two bolts holding it. https://www.yenko.net/ubbthreads/imag...lins/beers.gif https://www.yenko.net/attachments/386266-tn_P1010798.JPG

Re: really cool 70 Z28..simply the best.
 

Valve cover bolts and my ugly fingers. Two have defined rings around the M and two don't. https://www.yenko.net/attachments/386267-tn_P1010803.JPG

Re: really cool 70 Z28..simply the best.
 

Glue on valve cover for the gasket. Ran down the side before they flipped it over and installed it. https://www.yenko.net/attachments/386270-tn_P1010794.JPG