|
Re: 67 Z28 project
1 Attachment(s)
|
Re: 67 Z28 project
1 Attachment(s)
|
Re: 67 Z28 project
how bout some close ups of the firewall hole for the cowl plenum air cleaner. inside and out if possible since they were said to be dealer installed and from ones I have seen, they were done differently across the states
|
Re: 67 Z28 project
Are those Kustom headers? Nice car...
|
Re: 67 Z28 project
Gary had a trailer hitch just like that on his 1967 RS/SS Camaro...
Way cool that you are documenting everything! https://www.yenko.net/ubbthreads/imag...s/headbang.gif |
Re: 67 Z28 project
Geez it looks like you are going to have this thing together and running in a few weeks.
Mark Sheppard |
Re: 67 Z28 project
[ QUOTE ]
I had a later one on a red 67 RS Z but don't have much in the way of pics and the guy won't sell me the car back. [/ QUOTE ] Next time I am at LB's I will hiest your old 67 Z for you... what do I get when I deliver ? https://www.yenko.net/ubbthreads/imag...lins/smile.gif Great find Charley . That is going to be one sweet car when you are finished. I think you should put the experimental motor in that non spoiler flat hood 69 RS Z I have https://www.yenko.net/ubbthreads/imag...ns/naughty.gif |
Re: 67 Z28 project
[ QUOTE ]
trailer hitch ? https://www.yenko.net/attachments/361610-tn_012.JPG [/ QUOTE ] trailer hitch ?... ...for pulling your 67L79 Nova https://www.yenko.net/ubbthreads/imag...iggthumpup.gif |
Re: 67 Z28 project
[ QUOTE ]
how bout some close ups of the firewall hole for the cowl plenum air cleaner. inside and out if possible since they were said to be dealer installed and from ones I have seen, they were done differently across the states [/ QUOTE ] Not trying to hijack, just answering a question. Here is a picture of my cowl hole. Not cut out very pretty. I am not sure exactly where the car was bought, but it spent the majority of its life in MN. http://i148.photobucket.com/albums/s...S/cowlhole.jpg |
Re: 67 Z28 project
Gotta love the "optional Hole sawn cowl plenum" Nothin like using the right tool for the job!
|
Re: 67 Z28 project
Charlie a '68 Yenko Camaro project is currently on ebay. You could have a home for both motors.
|
Re: 67 Z28 project
Yes I was told about that car by another member last weekend. I was told it was for sale for 125K. Spoke to the owner last night and was quoted 210K. It is missing the vin tag in the dash because it was stolen when it was about a year old. It has a Tenn state assigned vin with the same vin on a tag next to the Yenko tag. Also has a 160 speedo not the Yenko 9737 140 unit. Nice project but.....
|
Re: 67 Z28 project
1 Attachment(s)
This cowl plenum hole was cut out very nicely. https://www.yenko.net/attachments/361732-tn_001.JPG
|
Re: 67 Z28 project
1 Attachment(s)
|
Re: 67 Z28 project
1 Attachment(s)
cowl panel held in with cad plated screw. https://www.yenko.net/attachments/361734-tn_004.JPG
|
Re: 67 Z28 project
1 Attachment(s)
exhaust details that look orig to me but maybe a 67Z expert can confirm. https://www.yenko.net/attachments/361858-tn_001.JPG
|
Re: 67 Z28 project
1 Attachment(s)
Looks like sealant was used in the upper pipe joint. https://www.yenko.net/attachments/361859-tn_002.JPG
|
Re: 67 Z28 project
1 Attachment(s)
passenger side tailpipe is welded. https://www.yenko.net/attachments/361860-tn_003.JPG
|
Re: 67 Z28 project
1 Attachment(s)
|
Re: 67 Z28 project
1 Attachment(s)
|
Re: 67 Z28 project
1 Attachment(s)
|
Re: 67 Z28 project
1 Attachment(s)
|
Re: 67 Z28 project
1 Attachment(s)
|
Re: 67 Z28 project
1 Attachment(s)
|
Re: 67 Z28 project
1 Attachment(s)
traction bar bracket with grade 8 bolts https://www.yenko.net/attachments/361870-tn_010.JPG
|
Re: 67 Z28 project
1 Attachment(s)
|
Re: 67 Z28 project
1 Attachment(s)
|
Re: 67 Z28 project
1 Attachment(s)
posi tag and plug https://www.yenko.net/attachments/361873-tn_013.JPG
|
Re: 67 Z28 project
My 68 Z from California had all the same exhaust clamps and hangers,I wondered if they were correct.Thanks for taking time and posting the pics. https://www.yenko.net/ubbthreads/imag...ins/3gears.gif https://www.yenko.net/ubbthreads/imag...ins/3gears.gif
|
Re: 67 Z28 project
I think the one with the sealer has been changed as it is not a guillotine type like the others.
|
Re: 67 Z28 project
[ QUOTE ]
trailer hitch ? https://www.yenko.net/attachments/361610-tn_012.JPG [/ QUOTE ] Looks like the U-Haul hitch that was on our '67 RS-SS350. |
Re: 67 Z28 project
1 Attachment(s)
It left like a thief in the night last night, headed for Performance Restorations in Illinois. https://www.yenko.net/attachments/362778-tn_001.JPG
|
Re: 67 Z28 project
I had a 70-1/2 R/S Z/28 that I used for towing. It had a weld in frame hitch and 4:10 gears. I drove it on a 600 mile round trip to Los Angeles one week end to pick up an Austin mini cooper. It pulled would pull a trailer real well but I had to stop at every Union 76 gas station I saw along the way.
Mark Sheppard |
Re: 67 Z28 project
What is this switch?? My 71 Lt-1 Corvette has something similar....just never knew what it did?
[image]http://img.photobucket.com/albums/v6...8-tn_013-1.jpg[/image] |
Re: 67 Z28 project
[ QUOTE ]
I drove it on a 600 mile round trip to Los Angeles one week end to pick up an Austin mini cooper. Mark Sheppard [/ QUOTE ] Hey...I knew that LA was quite a ways from "the OC"...I just never realized it was that far! https://www.yenko.net/ubbthreads/imag...emlins/eek.gif https://www.yenko.net/ubbthreads/imag...mlins/grin.gif https://www.yenko.net/ubbthreads/imag...mlins/wink.gif |
Re: 67 Z28 project
Good to hear Charley...keep us updated on a regular basis...please! https://www.yenko.net/ubbthreads/imag...mlins/grin.gif
|
Re: 67 Z28 project
No this was when I lived up in Fresno by this 67 Z/28. When I moved down to Long Beach I brought the 70 Z/28 with me. All I could afford was to live in an apartment complex where about 2 cars were being stolen a week. I did not want the car to get stolen and parted out so I sold it instead. Sure enough in the next months Hemmings the 70 Z/28 was for sale for twice what I sold it for.
Mark Sheppard |
Re: 67 Z28 project
Back up sw for rear back up lights.
|
Re: 67 Z28 project
Unfortunately JM has the 63 o-dash experimental aluminum heads at his shop for some repairs...I have tried to get to his place for some other work i need done on some other parts, but he is a very busy man...When i get there i will take some pics and post them,...hopefully next week.......and the hemi x-ram intake has ports more similar to a Ford Boss 302 than anything I have found...I was thinking of trying to have an intake made by cutting the top half of a "production" x-ram base and mating with a custom-made type intake bottom....anyone know a very very good aluminum intake fabricator??? It would have to be a real good custom job. any ideas??? thanks
|
Re: 67 Z28 project
[ QUOTE ]
What is this switch?? My 71 Lt-1 Corvette has something similar....just never knew what it did? http://img.photobucket.com/albums/v6...8-tn_013-1.jpg [/ QUOTE ] I think it makes the little white lights in the back of the car light up. https://www.yenko.net/ubbthreads/imag...ns/naughty.gif |
| All times are GMT. The time now is 08:20 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.