The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Member's Rides (https://www.yenko.net/forum/forumdisplay.php?f=100)
-   -   1969 SS 396/350 Chevelle (https://www.yenko.net/forum/showthread.php?t=121933)

Mr. Chevy 01-21-2019 11:29 PM

Thanks Damien, your car looks great!!

Happy motoring...

Rich

Damien 01-22-2019 01:05 AM

Much appreciated Rich, thank you.

Damien 01-28-2019 06:02 AM

2 Attachment(s)
Out and about in the sunshine again today.
Took in the annual Victorian Hot Rod show at the iconic Royal Exhibition Building in Melbourne.

Postsedan 01-28-2019 11:05 AM

Victorian Hot Rod Show under the Beautiful blue sky.....the perfect day :)

Thanks for sharing.

Dan

mockingbird812 01-28-2019 02:56 PM

Very nice Damien! Yeah, I'm jealous - your weather looks gLoRiUs!!!

Damien 04-24-2019 02:18 AM

1 Attachment(s)
Finally got around to swapping out the front springs.
The previous pair were too low and spongy.

wheelhop 04-24-2019 10:41 PM

Looks good "down under" !

SS427 04-24-2019 10:50 PM

Damn that's nice!

Postsedan 04-25-2019 01:16 AM

As I have said many times.....Damien is the perfect example of great car guys enjoying the Hobby to the fullest while making their cars better each season :)

Well done Damien.

Dan

ZLP955 04-25-2019 07:44 AM

Car looks great and the weather looks good for a cruise Damien. Been enjoying some fantastic unseasonably warm days here, but the overnight inland frosts are forecast to begin this weekend.....
Hope you had a great ANZAC day!

Damien 04-25-2019 10:10 PM

Thanks for the kind words gents!

We've been saying for weeks down here Tim that the good weather must almost be over! I think your right though, the end is nigh!

Damien 09-19-2019 02:30 AM

2 Attachment(s)
Received a package from Rick Jackson yesterday.
Fantastic as always!

ZLP955 09-19-2019 02:44 AM

Eric does fantastic work!

John 09-21-2019 03:09 AM



…. Nice work !

Damien 10-12-2019 03:04 AM

2 Attachment(s)
Some progress today.
Carb on, new lines and filter in. Up and running. Has a couple of fuel leaks, nothing major. I need a few bits and pieces now, things that I cannot get here so hopefully in a couple of weeks we will be ready for summer.

ZLP955 10-12-2019 09:52 AM

Looks good!

Damien 10-13-2019 12:28 AM

Cheers Tim.:biggthumpup:

Damien 11-10-2019 10:03 PM

1 Attachment(s)
First time out yesterday with the new carb. Ran like a top!

wheelhop 11-11-2019 12:25 AM

How is your gasoline / petrol down under? Better than the junk we have in the States?
How much is it per liter / gallon?

Damien 11-11-2019 12:42 AM

The fuel here for the most part is rubbish. Being a bit player in a lot of things on the world stage, I think we get the dregs as far as fuel is considered. I run 98 octane premium but still need to run an octane booster as well. Premium fuel runs anywhere from $1.50- $185 plus a litre, adding in $14- $18 for a bottle of booster for every tank, it's an expensive proposition every time you fill up.

markinnaples 11-11-2019 01:43 PM

Damien, Are there any local small airports you can check to see if they'll sell you aviation fuel? I found a couple here in my town where they will sell you their 101 octane for about $5/gal which is way better than the VP110 gas at $9/gal at a local engine builder shop. Might be worth your while to check it out. Cheers, Mark

SS427 11-11-2019 01:53 PM

Laws are likely different in Australia but in the US it is illegal to pump AV gas directly into a car's fuel tank due to the absence of road tax on the AV gas. All this means is you need to fill up several gas cans armed with a good excuse for why you are doing it. I always used the "its for my off road car" and it worked. Also, AV gas does not have all the some additives that automotive fuel has. Not an issue but just stating the facts.

Igosplut 11-11-2019 02:12 PM

Av gas is mixed to burn at high altitudes, different than VP-etc. Nice thing is it never goes bad.

markinnaples 11-11-2019 02:31 PM

Thanks for saying that Rick. Yes, there is a drag strip at the local airport and they will sell it to you if you put it in your own cans, which is fine with me. Is there an additive(s) that would be good to add to the Av gas that will help my engine when I run it? I've only used VP 110 up to this point, but when I'm done redoing my engine I was hoping to run the less expensive Av gas. Thanks.

Damien 11-11-2019 06:41 PM

Mark, we used to go to the local airport in years gone by and fill up our fuel jugs with Av Gas straight out of the bowser for our race car, but as Rick says, a lot has changed since and I don't think there are any of the smaller airports that will do this anymore unfortunately.

Igosplut 11-11-2019 08:40 PM

Homeland security also affects just where you can go in airports also (in the US) I still get Av gas, but through an employee, not at the airport.

SS427 11-11-2019 08:44 PM

So true. I can remember driving my car onto the tarmac to fill it, then driving on to fill up the gas cans. Neither of those are happening today. You almost have to have someone on the inside to get the fuel unless you are pumping it into an airplane.

Igosplut 11-11-2019 08:58 PM

They used to let us run up and down on the airstrip at the end of the Cape (when it was foggy as it was/is a sight landing). Tank up the cars and go for it. No more now....

https://i.postimg.cc/13Py62Sk/Burn078.jpg

markinnaples 11-11-2019 11:33 PM

There are two local airports here in Naples that supposedly will fill your cans for you. I have a contact at the one that who said he would do it no problem (in cans of course) and the other (as I said above) has a drag strip right on one of the old unused runways and I've heard they will still fill cans. We're a pretty small area / town so maybe things are a little more casual here.

Damien 03-10-2020 07:04 PM

3 Attachment(s)
We cruised to regional show and shine this week, enjoying the Australian summer, which has been hit and miss to say the least.

mockingbird812 03-10-2020 07:07 PM

Looking good Damien! I'll betcha its great getting her out. Love CS paint on a '69!! :biggthumpup:

Damien 03-11-2020 01:31 AM

Cheers Sam.

Damien 01-26-2021 06:24 PM

2 Attachment(s)
Well I finally got around to upgrading the ignition, somewhat by neccesity as the MSD distributor module took a dump.
I changed to a Pertronix system and couldn't be happier. Easy to install and fired up right away. It seems that they must buy plug wire by the mile though as most of the pre made wire set I bought are way too long. Need to change the plug ends to a straight boot and will shorten them up in the process.

JRC99 01-26-2021 07:07 PM

Quote:

Originally Posted by Damien (Post 1533825)
Well I finally got around to upgrading the ignition, somewhat by neccesity as the MSD distributor module took a dump.
I changed to a Pertronix system and couldn't be happier. Easy to install and fired up right away. It seems that they must buy plug wire by the mile though as most of the pre made wire set I bought are way too long. Need to change the plug ends to a straight boot and will shorten them up in the process.

I've toyed with the idea of their stock look distributors. How does it run when you lay into it?

Damien 01-27-2021 09:36 PM

Haven't had it out yet, only running in the garage but it fired up instantly, which tells me that the MSD system was on it's way out for a bit as it was a struggle to start for a while.
Once I have cleaned up the plug wires and some other wiring it will be out for a test run.
Pleased with the system so far though.

jl8z28 01-29-2021 01:39 PM

I have an original distributor in my 396 350hp Chevelle the carb was rebuilt 4 speed runs great plenty of power

jl8z28 01-29-2021 01:40 PM

69 Chevelle
 
1 Attachment(s)
Original distributor

Damien 05-25-2021 02:33 AM

2 Attachment(s)
Well after a long search locally, I finally managed to turn up a pair of 15x4.5 SS front runners to go with my rears that I've had for 3 or 4 years!
I had planned to buy a pair when in your fine country over Xmas 2019/20 but it didn't work out.
I realise they are flat spoke nothing specials but beggars can't be choosers!
Would love some input for tires if anyone has some suggestions?

wheelhop 05-25-2021 02:24 PM

2 Attachment(s)
A nice set of Repro Goodyear bias ply tires would look great!

Mr. Chevy 05-26-2021 11:31 PM

Quote:

Originally Posted by wheelhop (Post 1549469)
A nice set of Repro Goodyear bias ply tires would look great!



The Hanke Mobile!!! LOL Beautiful Car Jim......

Rich


All times are GMT. The time now is 12:04 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.