Re: MUNCIE METAL TAG ID
 

Different speedo gears on the main shaft... Crash

Re: MUNCIE METAL TAG ID
 

So after reading this topic of discussion, I decide to go out in the garage and check out the tag for my 69 Z/28 and see if it has that 3946797 tag that is being discussed...

Mind you, this Muncie is the matching number gearbox for my car but has been sitting under a workbench for 15 + years (my buddy who used to own the car broke one of the mounting ears). I've never bothered to look at it other than to make sure the VIN was correct....

Low and behold, here's a pic of what I found....

Charlie

Re: MUNCIE METAL TAG ID
 

Nice! You didn't even know you had a rock crusher? Can you post a pic of the assembly date code?

Re: MUNCIE METAL TAG ID
 

Oh sure, make me get my hands dirty.......

Well, with a little help from some carb cleaner, here you go.......

FYI, my car is a 10A Norwood built Camaro so I think that is before they started stamping the extra trany code letter on the case??? Probably why I never bothered to open the side cover and check it out? Looks like I have a new task to do this weekend....

Re: MUNCIE METAL TAG ID
 

Or save yourself the time and effort and give me the Z28..

Re: MUNCIE METAL TAG ID
 

I'd be happy to Charley.... but it was dirty last time I had it out it wouldn't go to well with the others in your Harem....

Re: MUNCIE METAL TAG ID
 

Perfect..and it is already on the trailer..Your only about 70 miles away. You could have it here saturday.

Re: MUNCIE METAL TAG ID
 

I have one I have been trying badly to decode: M20 with an assembly code of P2C29A. Has the 26 spline in and 32 out, drain plug, case #3925661, tail #3978764, and side cover #3952648. Everything seems to indicate it came in an 1972 BB Chevelle. The metal tag on the side cover is: 6271516WD. I am confident that it is correct for the trans. I have had it since 1980 and I know it has not been touched and the metal tag has stayed intact. Would love to know how to decode this metal tag. Any help would be appreciated!
PS. tried to upload a pic of it but do not know how. Clicked on "enter an image" but it's asking for a ULR. Does that mean I have to put the pic on a page to add? -Technology passes us all by sooner or later...

Re: MUNCIE METAL TAG ID
 

I have a dog food can full of these, perhaps I should check them...

Re: MUNCIE METAL TAG ID
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: acicoria1</div><div class="ubbcode-body">I have one I have been trying badly to decode: M20 with an assembly code of P2C29A. Has the 26 spline in and 32 out, drain plug, case #3925661, tail #3978764, and side cover #3952648. Everything seems to indicate it came in an 1972 BB Chevelle. The metal tag on the side cover is: 6271516WD. I am confident that it is correct for the trans. I have had it since 1980 and I know it has not been touched and the metal tag has stayed intact. Would love to know how to decode this metal tag. Any help would be appreciated!
PS. tried to upload a pic of it but do not know how. Clicked on &quot;enter an image&quot; but it's asking for a ULR. Does that mean I have to put the pic on a page to add? -Technology passes us all by sooner or later... </div></div>

What is the vin stamped next to the assembly date?