Re: 1969 nos chambered exhust
 

If nothing else it loses "seat of the pants" feel with the chambered on my Chevelle for some reason...not sure if real numbers would bear that out.

Re: 1969 nos chambered exhust
 

$5500.00 final bid with reserve not met.
After what William recently explained,is this a smart move by the seller? https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

Re: 1969 nos chambered exhust
 

A great many things on eBay are not what you'd call 'smart' https://www.yenko.net/ubbthreads/images/graemlins/no.gif

Re: 1969 nos chambered exhust
 

Here's a good read on exhaust systems & performance:

http://www.boyleworks.com/ta400/psp/exhaust2.html

As for the Flowmaster exhaust, I'm not a fan at all, but that's what I put on our Camaro, becuase no one else makes a 2.5" mandrel bent system, for exhaust manifolds, that uses a transverse muffler. Pete fabbed his up from scratch with the help of a local mandrel bender for his Pure Stock Camaro, but I used the majority of a Flowmaster kit and some mandrel bends on ours...but, the friggin' exhaust place STRAIGHTENED my mandrel bends then rebent them to fit! Naturally, they busted some of it, and what they didn't bust looks like crap...

Re: 1969 nos chambered exhust
 

Umm, doesn't look like he bought all of it 25 years ago....
http://cgi.ebay.com/ebaymotors/ws/eB...tem=4512986971

Re: 1969 nos chambered exhust
 

[ QUOTE ]
As shown in the assembly manual [NC8] the RH rear chambered muffler was welded to its tailpipe. The LH rear muffler used a conventional tail pipe secured with a U clamp. Each muffler had 2 tabs and were bolted together.

[/ QUOTE ]

There is an original GM chambered system on ebay right now that shows that very setup.

http://cgi.ebay.com/ebaymotors/ws/eB...tem=4520947137

Rick H.

Re: 1969 nos chambered exhust
 

Very good Rick. Thanks for keeping us informed again. https://www.yenko.net/ubbthreads/imag...iggthumpup.gif Sam

Re: 1969 nos chambered exhust
 

I see the headpipes and intermediate pipes are missing from that particular system...those intermediate pipes are the REAL power killers...they flatten out to clear the tranny crossmember and are as crooked as a dog's hind leg!

BTW, our system looks just like that in the last link (rear pipes bolt together etc.) but the pass. side pipe is NOT welded on...so what do we have?

Re: 1969 nos chambered exhust
 

[ QUOTE ]
Very good Rick. Thanks for keeping us informed again. https://www.yenko.net/ubbthreads/imag...iggthumpup.gif Sam

[/ QUOTE ]

No problem Sam. Hope all is well. https://www.yenko.net/ubbthreads/imag...mlins/flag.gif

Rick H.