Moving along...... Got the new A/C lines installed.... Then I had the "PLEASURE" of installing the Holley stainless exhaust system..... Took about 45 minutes, what a work of art..... So Impressed with everything purchased from Holley...... Again, Really nice to get what you pay for where everything actually fits and works as Designed....




https://hosting.photobucket.com/imag...080&fit=bounds
https://hosting.photobucket.com/imag...080&fit=bounds
https://hosting.photobucket.com/imag...080&fit=bounds
https://hosting.photobucket.com/imag...080&fit=bounds
https://hosting.photobucket.com/imag...080&fit=bounds

Very cool!

Got the Modules mounted and out of the way...... The mountain of wires are slowly disappearing......

https://hosting.photobucket.com/imag...080&fit=bounds
https://hosting.photobucket.com/imag...080&fit=bounds
https://hosting.photobucket.com/imag...080&fit=bounds

That LS is really looking Good in that engine bay!

As always....looks Great!

I hope to see you at Mundelein this Summer.

Dan

Been a while since a update...... Got everything hooked up and wired in the engine compartment....... Next we have to pull the Dash out of the car for the Dakota Digital Gage conversion and adding the modules.....Still waiting for the Hydra-Boost system to arrive for completion........ The wiring in the Engine compartment has mostly been cleaned up enough to be presentable without cutting up the GM harness.......Here are some new pictures......
https://hosting.photobucket.com/imag...080&fit=bounds
https://hosting.photobucket.com/imag...080&fit=bounds
https://hosting.photobucket.com/imag...080&fit=bounds
https://hosting.photobucket.com/imag...080&fit=bounds
https://hosting.photobucket.com/imag...080&fit=bounds

Looks really clean, Ken! :headbang::worship:

Look'in good!

The part I have been putting off is now here...... Time to get this mess cleaned up.... The good thing is with the Dakota Digital stuff going in 75% of the wires you see will be non functional........

https://hosting.photobucket.com/imag...080&fit=bounds
https://hosting.photobucket.com/imag...080&fit=bounds

Lotso wires!!:shocked: :no: :ooo:

Is that a piece of romex used for part of the dash wiring?