Re: Vintage Lakewood Scattershield - Wanted
 

Tom asked me to post these photos.....

"Sam,
can you post this on the wanted Lakewood thread.
This is an older version but not old enough for that 2 PC bolt on access shield.
Thanks,
Tom"

https://www.yenko.net/ubbthreads/pics...9257-image.jpg
https://www.yenko.net/ubbthreads/pics...9258-image.jpg
https://www.yenko.net/ubbthreads/pics...9259-image.jpg

Re: Vintage Lakewood Scattershield - Wanted
 

Looking for another Lakewood #1570 chevy block plate like my original below or like the other style posted. Any leads would be greatly appreciated.

-Dave


https://www.yenko.net/ubbthreads/pics...ck_plate_3.jpg
https://www.yenko.net/ubbthreads/pics...ck_plate_4.jpg
https://www.yenko.net/ubbthreads/pics...ck_plate_1.jpg

Re: Vintage Lakewood Scattershield - Wanted
 

I've got a nice #1571 that's never been cut on but it has been chromed many years ago.

Re: Vintage Lakewood Scattershield - Wanted
 

If any others are available, I might be in the market. Not trying to hijack, just throwing it out there to the members that might have an extra.

Re: Vintage Lakewood Scattershield - Wanted
 

Went to a swap meet last Sunday with a friend. He's cross between a street rodder and a drag racer, so he comes up with a lot of oddball stuff. When he unloaded his parts for sale he had a Chevrolet block plate. There are no numbers stamped on it, and it has only one nut welded on it, which is for the old type starter. I have no idea what brand it is, and it appears to have never been used or cut on. The guy that owns it is named Duane, his cell phone is 574-292-2282 . He wants $75.00 plus postage. Call or text him if it looks like you can use it. Oh, the center hole is 6 7/8 dia, and overall the piece is 17 7/8 from the center of the top mounting hole to the bottom edge.

https://www.yenko.net/ubbthreads/pics...1-mvc_009f.jpg

https://www.yenko.net/ubbthreads/pics...2-mvc_010f.jpg

https://www.yenko.net/ubbthreads/pics...3-mvc_011f.jpg

https://www.yenko.net/ubbthreads/pics...4-mvc_012f.jpg

Re: Vintage Lakewood Scattershield - Wanted
 

John...thanks for the lead. The one you posted is a Lakewood block plate but for a much later year. I would like to find an earlier version like the ones I posted with the louvered vent, if possible. Locating one may be a tall order to fill.

-Dave

Re: Vintage Lakewood Scattershield - Wanted
 

Mark,

The 1571 block plate you posted is awesome! I was thinking about using one like that however I decided not to because the location of the louvered vents are offset from center (as compared to the 1570 block plate) and the bottom louver is noticeably shorter than the top.

-Dave

Re: Vintage Lakewood Scattershield - Wanted
 

It took some time but the Lakewood #1570 chevy block plate like my original has been found.

Thanks Everyone!!!

Re: Vintage Lakewood Scattershield - Wanted
 

Old post but here is another one for sale

Scattershield