The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Supercars/Musclecars-For Sale (https://www.yenko.net/forum/forumdisplay.php?f=81)
-   -   1969 Judge 4 speed (https://www.yenko.net/forum/showthread.php?t=114933)

tjs44 02-15-2012 11:18 PM

Re: 1969 Judge 4 speed
 
The price for the done car with the original engine is 43K.I have a WS block stroker engine going together right now,might be on Joe Shermans dyno next week.It could be avail for it.Also have a one of only a handfull Alu block tunnel port RA V engine avail for the car.Anyone interested can email me at [email protected].
The car is sitting waiting for a engine to be put in.After it is in it will go to the shop for headliner and package tray.Trying to sell before I have to title and pay tax on it which will only raise the price.Tom

tjs44 02-21-2012 03:43 AM

Re: 1969 Judge 4 speed
 
3 Attachment(s)
original engine is in.The alu V motor was sold today.WS motor still avail.

Xplantdad 02-21-2012 04:05 AM

Re: 1969 Judge 4 speed
 
Wow...it's looking great!

92646 02-21-2012 09:23 PM

Re: 1969 Judge 4 speed
 
Tom I am a little concerned if this is your idea of slowing down. The car looks great, it is a little late now but what is the stroker motor?
Mark Sheppard

tjs44 02-22-2012 02:27 AM

Re: 1969 Judge 4 speed
 
When I bought the car it came with a 69 WS block.I did some checking and found out it is a restamp block.69 RA III blocks are nothing special.Just another 2 bolt block but has a diff code depending if a auto or 4 speed.Anyway,I built it from the block up to look like a RA III engine.The crank is a Ohio crank forged 4.21 stroke unit.Forged H beam rods and Ross 4.155 bore forged dished pistons for 9.5 CR.The heads are correct 69 RA III #48 heads.The cam is a compcams hyd roller with comp lifters.The heads were done by Joe Sherman racing.All new valves springs,retainers etc.H&S full roller rockers.I had nothing to build the engine so had to buy every nut and bolt to build it.It will be a very nice 455 stock looking 400 RA III driver.

tjs44 03-01-2012 06:53 PM

Re: 1969 Judge 4 speed
 
trans,driveshaft are in.Working to finish up underside to get on the radiator-shroud.Have to work a bunch at a sports show next week so might not be till the week after for the engine startup.Cant wait to actually drive it.Tom

tjs44 03-19-2012 02:34 AM

Re: 1969 Judge 4 speed
 
TTT,the car is now running.In the interior shop for headliner and package tray.Current pics in pontiac section.Trying to sell before I have to reg and and pay sales tax which will raise the price.Tom

tjs44 04-28-2012 12:56 AM

Re: 1969 Judge 4 speed
 
4 Attachment(s)
Pretty much done.Just have a couple elect. gremlins to figure out.Car is priced at $43500 if I dont have to reg.Tom

jbsides 04-28-2012 01:54 AM

Re: 1969 Judge 4 speed
 
Tom,

Are you bringing it to the Seal Beach Car Show tomorrow morning? I would love to see it there along with the impressive line of goats that paticipate every year down by the pier. It would be the hit of the show!
I also have a pal in San Diego who is looking for one, so if you don't bring it I'll ask him how serious he is and set something up if you don't sell it too quickly.
IMO, you should roll on the YOM DMV process for a set of black plates. It would only cost you $141, but the downside is it can take up to six months to get 'em.

JB

tjs44 04-28-2012 02:07 AM

Re: 1969 Judge 4 speed
 
It is not reg so im not driving it.I will be there with my 63 421 Lemans and 63 421 Cat.Look me up.Will be on the north side of the pier on Ocean.If you want to come over and see it let me know,only a few min from there.Tom


All times are GMT. The time now is 05:20 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.