Re: 143 Blueprint Cam Install
 

What springs do you guy's recommend ?I baby this thing but would like to twist it up if needed .

Re: 143 Blueprint Cam Install
 

[ QUOTE ]
What springs do you guy's recommend ?I baby this thing but would like to twist it up if needed .

[/ QUOTE ]
Any modern made spring should be fine...they won't have to be anything special for a "stock" cam, so just call Comp/Isky/Bullet/whomever and they'll be able to fix you up. IIRC, in our L72s we're running the springs that came with the Gm/Crane blueprint cam on one engine, and a set of Comps in another...

Re: 143 Blueprint Cam Install
 

Cam/lifters arrived today O.K.,,,,,,,,,,I appreciate the legwork guys........... https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: 143 Blueprint Cam Install
 

Got mine too, Thx

Re: 143 Blueprint Cam Install
 

Got mine as well sometime before I went back to Phoenix last weekend. Haven't opened it yet as I was busy working on my 442, but much appreciated guys.

Re: 143 Blueprint Cam Install
 

Received mine also. Thank you to all involved in this purchase. https://www.yenko.net/ubbthreads/imag...iggthumpup.gif Grady https://www.yenko.net/ubbthreads/imag...ins/3gears.gif

Re: 143 Blueprint Cam Install
 

Received mine and it looks great!

Thanks,

Elon

Re: 143 Blueprint Cam Install
 

We are very close to finishing this up. If you are going to jump in you better call Rob. LAST CALL!!!!!!!!!!!!!!!!

Jim

Re: 143 Blueprint Cam Install
 

[ QUOTE ]
I have the 143 Crane made cam and it doesn't run worth a darn with the manifolds and the correct dual exhaust .But it sounds good .I need to try headers and a twin muffler set up and see what happens .

[/ QUOTE ]

Steve,

I'd definately replace the original springs ASAP. Take a
trip to the dyno and see what you actually have. Remember
I mentioned that the idle seemed too tame for an L/78.......?

How was the distributor curve setup? There can be a few
issues working together here to rob power. The dyne may
help you identify what they are.

Nuch

Re: 143 Blueprint Cam Install
 

Just got Mine Today, PNW.

Thanks for your efforts.

Install in 2010 I hope. https://www.yenko.net/ubbthreads/imag...ns/burnout.gif

Jim W