![]() |
Re: Next Years Power Tour Car
Well, It seems that the lull in the action is coming to an end.......the car (Body and Doors) will be picked up tomorrow....also I picked up the rebuilt 12 bolt rear end today...and, I just about have the fuel tank/fuel pump assy finished.......I really liked the simplicity of the 2004-06 GTO fuel pump as it does not require a pressure controlled fuel return line to the tank......But as you can see the GTO pump is a little tall to fit into the 66 tank...
http://i13.photobucket.com/albums/a2...t/DSC04922.jpg So.....we need to make it fit.......I had a spare laying around that I cut up to play with.....I won't be using the stock GTO vent assy on the top of the unit......it will be capped off so I was able to cut out all the venting controls which took up a couple of inches....shortened the rods and springs and made it manageable......but I still had to put a lower sump in the tank as the stock tank is only 6 1/2" high..... http://i13.photobucket.com/albums/a2...t/DSC04927.jpg http://i13.photobucket.com/albums/a2...t/DSC05496.jpg http://i13.photobucket.com/albums/a2...t/DSC05497.jpg Thru wall fuel line adaptor yet to be welded in..... http://i13.photobucket.com/albums/a2...t/DSC05498.jpg http://i13.photobucket.com/albums/a2...t/DSC05500.jpg http://i13.photobucket.com/albums/a2...t/DSC05501.jpg http://i13.photobucket.com/albums/a2...t/DSC05502.jpg http://i13.photobucket.com/albums/a2...t/DSC05503.jpg I'm gonna have to install the tank about an inch below the trunk floor to clear the electrical plug assy, but....that's O.K. as there is a lot of room down there on my "Poifeckt" Survivor car.........LOL Also....the newly rebuilt 12 bolt that will be detailed and installed shortly.... http://i13.photobucket.com/albums/a2...t/DSC05504.jpg |
Re: Next Years Power Tour Car
Nice!!
|
Re: Next Years Power Tour Car
good stuff nice work
|
Re: Next Years Power Tour Car
Homecoming........After a lot of replacing sheetmetal, grinding, sanding and rubbing.......the Perfect "Nu Yawk" survivor car Body is back at home.....we laughing that the guy I bought the car from probably wouldn't notice the difference (My Bad)......the rest of the parts will be picked up next week...but anyway...Wet sanded and Buffed..it's home.....Now the fun begins......
http://i13.photobucket.com/albums/a2...t/DSC05505.jpg http://i13.photobucket.com/albums/a2...t/DSC05506.jpg http://i13.photobucket.com/albums/a2...t/DSC05507.jpg http://i13.photobucket.com/albums/a2...t/DSC05510.jpg http://i13.photobucket.com/albums/a2...t/DSC05513.jpg The Guy's at Puleras that made it all happen........Thanks guy's http://i13.photobucket.com/albums/a2...t/DSC05512.jpg http://i13.photobucket.com/albums/a2...t/DSC05514.jpg |
Re: Next Years Power Tour Car
Looks great Ken! Now the real fun part starts.
Looking foward to seeing it next summer. Happy New Year. Jake |
Re: Next Years Power Tour Car
Archy was here http://i77.photobucket.com/albums/j7...res/jav010.jpg
|
Re: Next Years Power Tour Car
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: IM RARE</div><div class="ubbcode-body">http://i77.photobucket.com/albums/j7...res/jav010.jpg </div></div>
damn nu Yawk drivers |
Re: Next Years Power Tour Car
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: IM RARE</div><div class="ubbcode-body">Archy was here http://i77.photobucket.com/albums/j7...res/jav010.jpg </div></div>
Dave.......Sorry about that.....my foot slipped off the brake pedal and hit the gas by mistake.........Senior Moment!!.....We both know that I would never engage in any "Hooligan" activities like Charley is prone to do..... |
Re: Next Years Power Tour Car
LOL looked great
|
Re: Next Years Power Tour Car
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: kwhizz</div><div class="ubbcode-body"> I also will be picking up the 12 bolt rear end (3:55 Posi) that was just rebuilt with all new parts.........Time to get back to work.......Also......That Nu Yawk exhaust system will be the first thing to go after getting up on the lift....LOL </div></div>
Ken....I sure hope you can save the exhaust tips......those sure look "bitchin" |
All times are GMT. The time now is 12:08 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.