Re: Day 2 Vega
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Lynn</div><div class="ubbcode-body">Looks like you glued long strips of rubber to the tank straps so as not to chafe the tank. Is that correct? </div></div>


It's actually thick roofing paper. Not exact, but very close to what I pulled off of it.

Re: Day 2 Vega
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mockingbird812</div><div class="ubbcode-body">Sharp work Tracy. Never knew the Vegas had the off set gas tank. Probably conducive to a better launch placing more weight over the r/r tire! </div></div>


Thanks guys.
With the NMW battery box in the rear, I will have to add more air to that shock..lol

Re: Day 2 Vega
 

Did you box the upper control arms or are they stock unboxed?

Re: Day 2 Vega
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Fast67VelleN2O</div><div class="ubbcode-body">Did you box the upper control arms or are they stock unboxed? </div></div>


I boxed them. The lowers are boxed because the car came with a sway bar.

Re: Day 2 Vega
 

Every since installing the Motion headers, I've been wanting to make a set of front motor plates like the ones Motion sold.
Going by the pictures in the Motion Vega book, I made an Auto Cad drawing and had the pieces laser cut.

Re: Day 2 Vega
 

Looks good!

Re: Day 2 Vega
 

Thank you.
Finally got the headers done. They turned out great.

Re: Day 2 Vega
 

Nice looking! What is the finish?

Re: Day 2 Vega
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mockingbird812</div><div class="ubbcode-body">Nice looking! What is the finish? </div></div>

Mike at M&amp;R Coatings in Kodak, Tennessee done them.
He puts on a layer of the standard silver ceramic coating and bakes it on. Then he
applies two coats of the white and bakes them again. Only charges 275.00 and that
included him blasting them.

Re: Day 2 Vega
 

I love me some white headers!