![]() |
Weren't there only about 6 of the L79 cars built in '67? Or is that one of those rumors that's been floating around for years?
|
The engine assembly is from a 66. Car is a real 4 speed and built in June when they were released.
|
From my very limited Nova knowledge...
The 6 L79 Nova's built late in the '67 model year used a cast iron intake and Quadrajet carb, also script valve covers, unlike the engine in this Nova. |
I agree
My knowledge is limited too. I did read that 6-L79 engines from 1966 were found in the assembly plant, complete with the same Winters intake and Holley this car has, and were installed into Chevy II’s in 1967? Dunno? It’s gonna be fun to drive…
|
Quote:
|
Engine transplanted from 1966 L79 Nova. Very few muncie's installed in 67 Nova's. Most likely muncie is from the same 66 L79 Nova also
|
We own a 66 a L79 with K19. Are you willing to share the the engine stamping ?
|
Post the engine stamp if you will
|
Your help is priceless thank you!
4 Attachment(s)
Here is a photo of engine stamp and some additional ones..
Holley is 3807 list, 3418 carb with a Winters intake and lots of gas station and maintenance receipts. I’m still unclear about the E2L code on the cowl tag though. What’s the “2” in there for?? |
i have personally seen a 327-275, 4 speed wagon, and get this it was at a pick a part yard in CA, probably in 1983??, all i had time for was the ac brackets, went back next day and the car was bare, and i mean bare shell
|
E= A01 Tinted Glass All
2 ( not sure ) L = 4 speed trans |
ZH Suffix is A.I.R. (Smog) with C.A.C. A/C
|
Quote:
|
For a '67 "performance" Chevrolet engine there should be a partial VIN on the pad, to my understanding.
|
L79 Wagon
10 01 Pad Stamp ? 06D Trim Tag ?
|
Have a good friend who ordered a 68 Chevelle wagon new with a L-79, 4 speed. Car rusted away, but he still has the engine in a 62 Corvette now.
|
Quote:
|
2 Attachment(s)
Quote:
Attached are pix of one of two '67 L79 Nova's discussed on this site in 2018, both with script valve covers, cast intakes and Q-Jet carbs. The casting date from the block could settle this. I agree with cinovaparts that this is likely a '66 engine transplanted from a '66 loong ago. My .02. Whatever the story, this is a really cool Nova!! - Bill W |
L79 Nova...
Quote:
-wilma |
Way cool wagon!!
|
1 Attachment(s)
Here is a good example of a 66 L-79 block Chevy II....vin numbers individually stamped, just like the one I had back in the 80's.
|
1 Attachment(s)
‘
Original ‘66 L79 stampings are interesting, Member clnovaparts shared the below curved example a couple years ago back in this linked thread w/ more Genuine L79 stampings, click here… https://www.yenko.net/forum/showthread.php?t=170918 :beers: ~ Pete . |
Perhaps someone wanted an L79 wagon, was told he couldn't order one, so ordered an L30 327/275 4-speed wagon, along with getting the dealer to order a complete crate Nova L79, and then had it installed by the dealer?? If a service unit were ordered at that point then it probably would have been a 66 engine assembly.
Hard to imagine someone would transplant the engine from a 66 car years later WITH all the smog stuff still intact, along with the big radiator too. And the coincidence that the recipient wagon just happened to already be a factory 4-speed (probably ultra rare in and of itself)?? Seems like there has to be more to the story than just a typical 1970's engine transplant. On the other hand, having the air conditioning code seems odd -- unless all complete warranty Nova L79 engine assemblies were built as that version, so that they could be used as warranty replacement units on both cars with or without A/C. That was common in service replacement parts to just offer the version of a part that would fit with all other equipment combos. Either way, very very cool wagon!! I'd gently clean, get it reliable and roadworthy, and drive the snot out of it!!! |
Quote:
|
Wagon started out as 327 275hp, saginaw 4spd , AC, A.I.R.. The big tank radiator is most likely original to the car so equipped. Not keen on the engine stamp. Nice wagon project with parts added and deleted.
|
Quote:
|
Quote:
|
For whatever reason, a/c is seldom noted on the cowl tag of a 1st or 2nd generation Chevy II. On 2nd gens, a factory a/c car will have a vertical fan switch on the heater control panel. Also, a round hole and grommet near the top of the firewall to carry associated a/c wiring. etc. into the engine compartment. This wagon has both.
The sequence of the various dates on this wagon are all over the place. The block cast date is January 7, 1966, engine assembly date on the pad October 1, 1966 and the car was built the last week of June, 1967. All the known and documented 1967 L79 Chevy IIs were built in May and June, 1967 with engines assembled in those same months. On this wagon, the assembly date/suffix code stamping is smack in the middle of the pad, which is unusual. As mentioned several times in this thread, all U.S. built L79 Chevy IIs had a partial VIN on the pad. This one does not. All the evidence would appear to lean towards this not being the original engine in this wagon. L79 Chevy IIs and Acadians built in Canada had the same Flint built engines as U.S. cars, but Oshawa did not stamp them with partial VINs. Bob |
All times are GMT. The time now is 06:46 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.