Excellent original wire style distributor hold down and bolt
C headmarking bolt and raised pad retainer $20
***********SOLD************

Original rear brake line brass block shouldered bolts. These secure the line by attaching the brass block to the bracket that bolts to the rear end cover. Very nice and very hard to find originals.
1. L headmarking
2. WB headmarking
$12.50 each ppff

68 up oil filter adapter to block mounting bolts. D head marking. $10 a pair shipped to the lower 48 if paid with PayPal friends and family.

68 up oil filter adapter to block mounting bolts. RBW head marking. $10 a pair shipped to the lower 48 if paid with PayPal friends and family.

Corvette Camaro Chevelle Nova 4-speed inspection cover and automatic dust cover mounting bolts. Perfect Survivor condition GL head marking. $12.50 shipped to the lower 48 if paid with PayPal friends and family.

Flexplate mounting bolts, excellent original pieces restored. Grade 8 m head marking with original externally toothed star washers. $15 shipped to the lower 48 if paid with PayPal friends and family.

Very nice original big block valve cover spark plug wire retainer clip. Has been stripped and replated. Just needs to have the rubber vulcanizing reapplied. As nice as you're going to find for an original. $12.50 PPFF

Original z bar / cross shaft clutch and ball studs. Original restored pieces very nice. $12.50 Ppff.

Two very nice original spark plug wire separators. One of them has C stamped on it and the other has Arco. $12.50 each. PPFF

Excellent survivor distributor hold down bracket and RBW head marking bolt. Perfect for any survivor engine compartment. $15 PP FF

I just got a couple sets back from the plater of the NOS WITTEK # 10 big block bypass hose clamps. These have never been reproduced correctly. $17.50 a set shipped to the lower 48 ppff
************SOLD************

3 very nice unrestored original alternator brackets for big blocks with long water pump. These art 1970 ish on up. $20 each plus shipping. PPFF

68 through 72 small block steel valve cover rubber grommets. Including 68 Z28 and l79 and all 69 up steel valve covers. The angled valve cover grommet has a concentric ring around it and GF embossed on it. The other valve cover grommet has a concentric ring on the top and AB 131 embossed on the bottom with mold release marks. Excellent original pieces. $20 for the pair ppff.

69 through 74 small block and big block smog pump mounting hardware. All are matched RBW head marking original restored bolts. Long pivot bolt, 2 7/16-14 bracket to block mounting bolts 1 3/8- 16 adjuster Bolt 3 1/4-20 short Pully to pump bolts and 2 diverter valve mounting bolts. Everything is in excellent restored condition. $30 PP FF
************SOLD************

Automatic dipstick/modulator mounting clips (awt stamped) $10 each ppff
*****2 SOLD 1 AVAILABLE*****

Original 10 bolt rear end rubber brake line to rear end cover mounting bracket and original rbw head marking shoulder bolt for brass block. $15 ppff. Bolt is in excellent condition and the bracket is in excellent condition both have been replated.

12 bolt rear end gear mounting bolts. Two sets one with CH head marking and one with O. Excellent original pieces. $22.50 per set ppff

67 thru 68 Camaro big block air conditioning intake manifold mounting bracket. Very nice original piece.$25 ppff

Big block air conditioning compressor lower mounting bracket. Very nice original piece. $22.50 PPFF

12 Bolt rear rubber brake line to rear end cover mounting bracket (w/V stamping) and RSC mounting bolt. $22.50

Original NOS weather head brass oil line fitting. 67 thru 70 solid lifter big block.$22.50 PPFF

Speedometer cable adapter to transmission retainer with O stamp and mounting bolt which has unique flat head U-design. $15 PPFF

Original unrestored complete set of 12 M head marking exhaust manifold bolts. $60 PPFF ************SOLD************

5 exceptionally nice R head marking exhaust manifold bolts for small block. $30. PPFF

2 of them even still have some original paint on them.

Excellent original restored small block fuel pump mounting bolts and fuel pump plate to block mounting bolts.

These are the 9/16 hex design fuel pump mounting bolts with the flying f head marking and the fuel pump mounting plate bolts have SEMS for their head marking.

I've included a picture to show why the mounting plate bolts are unique to this application and most people have the wrong ones. The fuel pump mounting plate bolts are a little bit longer than regular timing chain cover and small block oil pan side rail bolts. And that's to make up the difference for the thickness of the plate itself that they're mounting.

$22.50 for the set. Two sets available.

Extremely nice alligator skin high performance small block water pump bypass hose. Extremely nice very flexible and pliable no cracks. On the one end of very little corner was tucked in when it was clamped but it will still seal perfectly as you can see the side screw clamp Impressions above it. $22.50. PPFF

Headlight washer hose tees. They don't reproduce the correct style for this application. Very hard to find originals.$17.50 pair. PPFF

Edited

Thanks SYC!
***********************************this thread is closed-all items have either been sold or moved to other threads******************************************* **