70 big block Camaro power steering pump hose bracket. This is the front part of the bracket that attaches the hoses to the frame. Has its original C stamped bolt and C stamped cover part of the bracket. Very hard to find. $50
***********SOLD************

Excellent restored smog pump pulley bracket bolts with RBW head marking and diverter valve mounting bolts with RSC head marking. As nice as you're going to find. $50. PP FF (x)

Heater hose to alternator retainer. Excellent original pit free restored piece painted black with AS stamping on it and original replated E head marking self-tapping mounting bolt. Excellent condition on all pieces. $45.

License plate mounting hardware. Some of the nicest RBW head marking bolts and two original nylon push nut. $40

4 bolt main big block 1" oil passage plug. W stamped. Still has some original paint on it. Very nice very hard to find $125. Ppff
************(SOLD)************

Extremely nice Survivor fuel line clamps with original finishes. 4 olive green 3/8 clamps and 2 red 1/4 return line clamps. All have <u> stamping. $50 ppff (x)

3 pairs of fender to hood side bumpers. Excellent original pieces definitely look different than the repos. $30 a pair.

3 pairs of original door jamb bumpers. Too long and one short. $30 a pair.

Excellent original restored said of quadrajet carburetor mounting bolts and studs. Studs have dimple on the end and have been CAD plated and the bolts have [] for their head marking and have been plated black. As nice as hell find. $50 ppff (X)

Sale price on complete set of restored 20 waffle lug nuts today and tomorrow only $100. Shipped to the lower 48

Three sets of original unrestored 1967 through 1969 Camaro rear spoiler mounting hardware. All large washer nuts have anchor stamped underneath them 2 sets have acorn nuts for the rear bolts and one set has small washer hex nut for the rear bolts. $80 per sets PP FF

Big block and small block oil pressure line 2 block fitting. Extremely hard to find weather headstamp. Most NOS pieces have CP stamped on them this is a very difficult to find assembly line piece. $60 ppff

Automatic dipstick/modulator mounting clips (awt stamped) $20 each ppff

Very nice original power steering hose to pump mounting clip. The reproductions do not have the same shape for the indent holding the hose on the hook. $20. Ppff

Very nice replated original emergency brake cable connector. $25 ppff

70 up EEC hose to fender well retainer clips and original D head marking bolt and tall locknut. $30. Ppff

Original rubber body plugs. Very nice pieces. $25 each. Ppff

1967 through 1969 tripower fuel line brass block. Weatherhead logos and original machining marks. Excellent unrestored condition. Incorrect replacements sell for $35. This is also correct for Dana / Nicky cars with tri-power setups.$50 Ppff (X)
************ SOLD ************

Very nice original translucent white plastic brake light switch stamped and with original pal nuts. $35 ppff

Spin on oil filter adapter to block mounting bolts. Rbw head marking. Recently replated. Excellent condition. $25. Ppff. (X)

Is it $20.00 shipped on the p/s hose clip

Yes it is. Thanks oh, I have several of them

Original 10 bolt rear end rubber brake line 2 rear end cover mounting bracket and original rbw head marking shoulder bolt for brass block. $35 ppff. Bolt is in excellent condition and the bracket is in excellent condition both have been replated.

1970-up TCS temperature wire 2 valve cover wire separator mounting clip. Excellent original piece. Unrestored. Still has perfect rubber Vulcanizing on it. $45. Ppff
************SOLD************

I will take 1 of the p/s clips

Thanks, PM sent

1970-up TCS 2 wire clip.
 

Rich, I'll take the clip.

Thanks Scott I'll mark it sold and send a PM

Rich, are there different time frames when the acorn nuts were used instead of just the captive (washer) nuts? Early car, late car etc.?

Thanks, Sam

Sam, that one I can't honestly answer. I do know of several original cars that I did restore our work on that had acorn nuts. And the ones that I had seen ranged from April 69 to September 69. I'm sure there's other dates thrown in there and maybe earlier years even, I don't know but that's what I've personally seen.

65 66 67 -mid 68 396 427 4 bolt main brass oil line to block fitting. Extremely nice original Weatherhead stamped peace. With the original Machining marks on the surface in circles. About as nice as you're going to find. $75. Ppff (X)

************SOLD************

1963 through 1967 Corvette glove box light bulb shield with o stamp. Very nice original unrestored piece very hard to find. $80 ppff (X)
************SOLD************

Brake pedal 2 push rod clevis pin. L in a circle, original Bowden clip and original retainer with <u> stamped. $40. Ppff (x)

Astro ventilation cable to cowl retainers and screws. Very nice original pieces. $25. Ppff

Original brass windshield washer filter. This is a very rare one. Has suppliers manufacturer logo on the back. Very few had this. Very nice original piece $50 (X)

3 complete sets of 4 NOS flanged front and rear license plate mounting screws. These sets are well over 30 years old. Been laying around in my toolbox forever. front set has a little shinier plating the rear sets have a little more patina on them. But they are in excellent condition. $40 per set ppff (x)

Very nice original assembly line large outside diameter nylon bushings and nosl you embossed grommets for the accelerator lever and the throttle arm on the carburetor. They don't reproduce these in this configuration. $50. Ppff

Original Back Drive bushing and grommet. Grommet has stepped insert and 4 release dots from the mold. Very nice original piece. This is the one that goes on the bracket mounted to the frame. $35. Ppff

63 through 67 Corvette expansion tank heater hose water t. $40. Had this laying around for many years.

Small block steel valve cover grommets. Extremely nice. Both assembly line pieces with manufacturing markings or Extrusion markings. Really really nice. $ 60 ppff (X)