Re: day two shifters
 

Yes it had the console and U shaped shifter .We pulled the console and tried to use the original shifter , but it was too clumsy, so we made the change to the Pontiac unit .

Re: day two shifters
 

Great. Can you ship me the console? LOLOLLOLOLOLOLOLOLOLOLOL

Re: day two shifters
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 67rs/ss</div><div class="ubbcode-body">It was the same seller says in the second listing &quot; Re-listing due to non paying bidder ,this is a auction you bid you win you pay for it&quot;. Possible bidding up the last 2 bidders in first auction were in at over 250.00. A couple of weeks ago a complete 60&quot;s hurst roll control in the box was on for a month and finally sold at 174.00 I believe. </div></div>

It just sold AGAIN from the same seller.....for $50.

Link

Kurt

Re: day two shifters
 

This is really neat. A Hurst Ram Rod for a 3 speed. Not a bad buy it now price at $425.

Kurt

Ram Rod 3 (Link)

https://www.yenko.net/ubbthreads/pics..._3_speed_6.jpg

https://www.yenko.net/ubbthreads/pics..._3_speed_7.jpg

https://www.yenko.net/ubbthreads/pics..._3_speed_1.jpg

https://www.yenko.net/ubbthreads/pics..._3_speed_2.jpg

Re: day two shifters
 

3 Speed, cool.....3rd gear at 90 mph [img]<<GRAEMLIN_URL>>/naughty.gif[/img]

Dan

Re: day two shifters
 

Nice, I happen to have ( somewhere) the same exact shifter for a three speed that's never been out of the box.

Re: day two shifters
 

I got a lead on some Hurst shifters at the Jefferson swap meet, and it turned out pretty good... Crash

Re: day two shifters
 

Wow! That's cool!!!

Re: day two shifters
 

That's one hell of a score. They all look mid 60s vintage.

Re: day two shifters
 

Holy crap Crash.....nice job.

Kurt [img]<<GRAEMLIN_URL>>/3gears.gif[/img]

Re: day two shifters
 

Jefferson Rocks! Great score Crash [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]

Dan

Re: day two shifters
 

wow impressive!

Re: day two shifters
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: crash</div><div class="ubbcode-body">I got a lead on some Hurst shifters at the Jefferson swap meet, and it turned out pretty good... Crash </div></div>

Wonder if there is any 66-67 Nova shifters there? [img]<<GRAEMLIN_URL>>/drool.gif[/img]

Dave
67 Nova Boy

Re: day two shifters
 

Got one for a '69 Nova with a console???

Re: day two shifters
 

I need one for a 66 GTO.

Re: day two shifters
 

Nova boy, Last I checked 1966-67 Chevy II was still available from Hurst, if not I think I have a couple...

Marlin, I'm pretty sure I have a 1969-70 Nova W/ console, BB or SB ???

Astock, Do you need OEM or aftermarket ???

Heres some more pictures of the odds and ends...

Thanks... Crash

Re: day two shifters
 

BB

Re: day two shifters
 

Aftermarket. I think it would be the same shifter (no console) for 442, Chevelle, Nova, GS, ect... Just figured if you had an nos one from the Jefferson meet.
Thanks

Re: day two shifters
 

Crash,

Looking for vintage 66-67 W/console.

Dave
67 Nova Boy

Re: day two shifters
 

Just dug out some Hurst and Mr Gasket shifters I've had for a Loooooooooong time, put away in the attic.
I'd like to get an idea what these are worth, and the applications.

This first one I know will fit a Muncie as I checked the bolt up pattern against one.
It is the early version with the flat reverse handle. I have the 3 large spacers that go between the shifter and trans mounting area.
https://www.yenko.net/ubbthreads/pics...0-dscf6919.jpg

Not sure what this one will bolt up to, but I know it is the later version with the round reverse handle
https://www.yenko.net/ubbthreads/pics...1-dscf6924.jpg

This Mr Gasket piece I think may have been on a Ford Toploader that I had in a 65 Mustang back in the 70's.
https://www.yenko.net/ubbthreads/pics...2-dscf6929.jpg

Re: day two shifters
 

Wow! That first picture is the exact First Design Ram Rod I purchased from Kurt....Way cool!

Dan

Re: day two shifters
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Rixls6</div><div class="ubbcode-body">Just dug out some Hurst and Mr Gasket shifters I've had for a Loooooooooong time, put away in the attic.
I'd like to get an idea what these are worth, and the applications.

This first one I know will fit a Muncie as I checked the bolt up pattern against one.
It is the early version with the flat reverse handle. I have the 3 large spacers that go between the shifter and trans mounting area.
https://www.yenko.net/ubbthreads/pics...0-dscf6919.jpg

Not sure what this one will bolt up to, but I know it is the later version with the round reverse handle
https://www.yenko.net/ubbthreads/pics...1-dscf6924.jpg

This Mr Gasket piece I think may have been on a Ford Toploader that I had in a 65 Mustang back in the 70's.
https://www.yenko.net/ubbthreads/pics...2-dscf6929.jpg
</div></div>

I found a Ford Toploader mounting bracket for the Hurst Ramrod, and it is identical to the mount plate in the middle picture.

Re: day two shifters
 

Here's one I recently picked up.

Re: day two shifters
 

https://www.yenko.net/ubbthreads/pics...628-yenko2.jpg

This is cool t handle

Re: day two shifters
 

Was there an earlier version of this Ram Rod shifter without shift stops? Thank you, Tom.

Re: day two shifters
 

Oh man.....what an awful way to ruin the originality of the one like I have with that reverse lock-out! Still a great item.

Re: day two shifters
 

I was watching this eBay auction for a Ram Rod Decal. Unfortunately they ended it early....we all know why! [img]<<GRAEMLIN_URL>>/mad.gif[/img]

Does anyone have one of these or know how I can get one made?

Thanks, Kurt

Ram Rod Decal

http://s5.postimg.org/chf6fi3pj/Hurs...l_3_X3_5_1.jpg

Re: day two shifters
 

Kurt, those pop up on eBay every once in a while. I think the guy reproduces them, but I didn't look into it much.

Re: day two shifters
 

kurt mr-427 sells them on ebay for 15 bucks he has 3 on there now with free shipping.

Re: day two shifters
 

I believe the one pictured above is the original one. At some point, Hurst must have changed it to the &quot;Hurst Ram 4&quot;. [img]<<GRAEMLIN_URL>>/dunno.gif[/img]

Thanks, Kurt


http://s5.postimg.org/inu1j69tz/Hurs...l_3_X3_5_3.jpg

Re: day two shifters
 

Maybe mr-427 would also be interested in reproducing the original Ram Rod decal/sticker? Can't hurt to ask.

Re: day two shifters
 

I have one original if they want something to go by.

Re: day two shifters
 

I have the picture saved on my computer. I just need to find time to see if anyone local can make some. Maybe after the holidays.

Kurt

Re: day two shifters
 

just picked up these

https://www.yenko.net/ubbthreads/pics...erender_10.jpg
https://www.yenko.net/ubbthreads/pics...zerender_5.jpg

Hurst Ram Rod Instructions
 

Hey, would anybody have the original instructions with the part numbers for a Hurst Ram Rod with the round Reverse lever for a Muncie with bolt on arms...,Thanks,Mike C.

https://www.jalopyjournal.com/forum/...1-jpg.3397624/

https://www.jalopyjournal.com/forum/...8-jpg.3397627/

Best I can do...hope it helps some.

Dave
67 Nova Boy