Re: SS Wheel valve stem extensions
 

How long should these be??? I found some in the bottom of my tool from when I was working at Monkey Wards mounting tires mid 1970's... Some are 3/4" and some are 1" with Shrader USA around the top and the white button... Crash

Re: SS Wheel valve stem extensions
 

Will these work?

http://roanoke.craigslist.org/pts/736976185.html

https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

Re: SS Wheel valve stem extensions
 

Crash....Im not sure on the length they should be. I did find another number in my research. The N66 (Super Sport wheel) and PO1 (Full Sized hub cap) have the 9417745 number and PO2 (Possibly the full sized spoked not sure as there was a mag looking full sized available also))and they are 9417730. I would take whatever you have. How many of each do you have? Thanks

Re: SS Wheel valve stem extensions
 

While out over the weekend I pulled into a parking space next to a new Grand Marquis - I didn't have my glasses on - but it had valve stem extensions on it that looked just like the white tipped extensions previously posted here.

Re: SS Wheel valve stem extensions
 

Here are a couple pictures of my original 70 Z28 with extentions, lugnuts, caps, rings, tires.

http://pic20.picturetrail.com/VOL17/...3/67157343.jpg

http://pic20.picturetrail.com/VOL17/...3/67157341.jpg

Re: SS Wheel valve stem extensions
 

Jack,

Same extention as on my car.

Re: SS Wheel valve stem extensions
 

Check out the SUPER RARE ORIGINAL 1st design Lug Nuts on Jack Seymours wheel.....If anybody runs across any savable, presentable copies.........please advise.....

Re: SS Wheel valve stem extensions
 

What makes the lug nuts so rare? They look identical to the ones that came on the Deuces.

Re: SS Wheel valve stem extensions
 

I think the crown is taller on original production line ones vs. over the counter ones. I'll bet detailed diagramed pics will soon follow. https://www.yenko.net/ubbthreads/imag...lins/smile.gif

Re: SS Wheel valve stem extensions
 

BTW... Did we ever decide for sure that Yenko Deuces used the same nuts as the Chevelle SS wheels? Since they would have been shipped with XT wheels and the Magnum 500's added, I always wondered if the 500's came shipped with a set of stainless capped nuts like GM installed wheels, or if Yenko just ran across the street to the local tire shop and got some chrome acorn nuts for them... Heck, I wouldn't have been surprised if he reused the open ended nuts from the XT's! What's your yellow car have on it Mayor?