Re: 1969 chevelle 396/375 aluminium head....
 

...It appeared to read "18B202XXX"
...but I will get photos of it tomorrow https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

Re: 1969 chevelle 396/375 aluminium head....
 

...The "1"...should be the "5th" digit of a "13" digit vin
....and according to my previous post...the "fourth and fifth" digits ...denote a "2 door sedan"....
....am I reading that correctly? ( the section Chevrolet Chevelle / Nomad 1965 - 1971 )
http://www.gaspumpclassics.com/resou...nformation.cfm https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

Re: 1969 chevelle 396/375 aluminium head....
 

What's the entire VIN# John?
You won't find the Entire VIN# on the engine block,only the CON (Confidential) VIN number,which is an abbreviated VIN#.

The full 1968 Chevelle VIN# should look like this example:
138378B123456

Re: 1969 chevelle 396/375 aluminium head....
 

...I will get photos of it and post tomorrow
....thanks for everyone's input https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: 1969 chevelle 396/375 aluminium head....
 

[ QUOTE ]
....The reason I am asking is because I just picked up
..a 4-bolt main block with this casting # 3935440
...and on the front pad is T0824KG
....I'm going to look for more numbers on it tomorrow
https://www.yenko.net/ubbthreads/imag...ins/3gears.gif

[/ QUOTE ]
.....I just double checked the casting numbers, the numbers on the front pad , and the vin number....
..and saw that I had "MIS-READ" THE block casting date!!!!
...the Date on the block is " C 11 8 "....NOT "G 11 8"....WHICH MAKES THIS A MARCH, 11TH 1968 BLOCK
....I will send some photos later https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: 1969 chevelle 396/375 aluminium head....
 

That makes a lil more sense.But that mid May 1968 VIN# vs. the August 1968 Tonawanda engine assembled date is hard to swallow.
Are you sure that Tona date isn't T 03 24?