|
Re: Traction bars
Can you read the tape? Seems fuzzy on my phone.
|
Re: Traction bars
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BillD</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BillD</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pxtx</div><div class="ubbcode-body">Do you think you are mistaken about the unequal length? Seems like you have 2 matching bars, just different colors.</div></div> I bought the bars at different times. The yellow ones I had for a long time. The black ones I bought at a different time a few years ago. I brought up the question as the photo from "chevyandpontiac" seems to show unequal length square tube bars</div></div>
Paul, here is a photo of the bars showing the length. [img:center]http://img.photobucket.com/albums/v3...y/102_1690.jpg[/img] </div></div>***24&1/2"from center of snubber to rear"U"bolt hole,I get. Odd about the Bars. |
Re: Traction bars
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: [email protected]</div><div class="ubbcode-body">Bill, think someone cut the front off one of those bars? The snubber position seems to show one hole or two holes available for the one bar.</div></div>
Sam the second hole on the longer yellow bar was added. I can tell that because the second hole is not on the reinforcement plate inside the bar where the snubber screws in. The second hole was added to the longer bar so that the snubber would contact the springs in the same spot for both bars. What got me going on this subject again was the picture above from "ChevyandPontiac" also shows unequal length bars. |
Re: Traction bars
"chevyandPonitiac" and "BillD" show or have the odd bars.
|
Re: Traction bars
1 Attachment(s)
Here's a couple of mine. Square tube Lakewoods and not really sure who made the blue ones...Reminded me of a Nickey type bar.
BIG |
Re: Traction bars
In all these years Bill I have never seen or maybe forgot that I ever saw uneven traction bars. I am updating my mind daily lately! Thanks to all you guys for posting this stuff.
|
Re: Traction bars
|
Re: Traction bars
I know this is a thread about traction bars but does anyone remember or have seen a production set of ladder bars that would require a piece welded to the rear frame rails or would this have been a homemade job? Thanks, Darrell
http://img.photobucket.com/albums/v6...o/DSC02435.jpg http://img.photobucket.com/albums/v6...o/DSC02434.jpg |
Re: Traction bars
Looks home made to me, as does the extra leaf in the spring pack....
|
Re: Traction bars
It sure as sh*t is!! I never noticed it before. Great eye!! I didnt put much thought into it. Just figured someone swapped the leafs from 4 for a 5 but after you saying that I went back looking at my pics and noticed that the clamps have been moved as well. Nice..
http://img.photobucket.com/albums/v6...o/DSC02431.jpg |
| All times are GMT. The time now is 08:15 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.