69 up long water pump big block alternator mounting hardware. Restored excellent condition. The WB head marking bolt is the top pivot bolt, the two RSC head marking bolts attach the lower bracket to the water pump, and the A head marking bolt has the thin hex that attaches the strap bracket to the back of the alternator. That bolt they don't even reproduce. These are as nice as you're going to find. $35 shipped to the lower 48 if paid with PayPal friends and family.

Quadrajet mounting bolts, several sets and head markings available. RSC, TR, CH, P. All in excellent condition. The CH and the P have most of their original black phosphate plating on them. The others are in excellent unrestored condition. $20 a pair shipped to the lower 48 if paid with PayPal friends and family.
*********** RSC AND P SOLD ***********`

Flexplate mounting bolts, excellent original pieces restored. Grade 8 m head marking with original externally toothed star washers. $20 shipped to the lower 48 if paid with PayPal friends and family.

Corvette Camaro Chevelle Nova heater hose to air conditioning compressor mounting bracket and original grade eight SBC mounting bolt. Very nice original piece. $20 shipped to the lower 48 if paid with PayPal friends and family. ************SOLD************

Several sets of original small block fuel pump mounting bolts. $20 a set shipped to the lower 48 ppff

1. n small font two pairs available

2. N large fonts two pairs available

3. L two pairs available

4. 23

5. Flying F two pairs available

6. EL two pairs available

7. Anchor four pairs available

8. Anchor over t ONE pair available

3 original LISLE magnetic drain plugs for Muncie Transmissions. $15 each. Ppff
****2 Sold, 1 left**** Thanks SYC!

Very nice original unrestored rear rubber brake line to rear end mounting bracket bolt with shoulder. 1 WB head marking and 2 L head marking bolts. Extremely nice. $15 each ppff

Very nice original big block valve cover spark plug wire retainer clip. Has been stripped and replated. Just needs to have the rubber vulcanizing reapplied. As nice as you're going to find for an original. $20

Original z bar / cross shaft clutch and ball studs. Original restored pieces very nice. $15 Ppff.

two very nice original spark plug wire separators. One of them has C stamped on it and the other has Arco. $15 each.

Excellent survivor distributor hold down bracket and RBW head marking bolt. Perfect for any survivor engine compartment. $20 PP FF

Four bolt main 396 427 454 oil passage plug with W stamping on it. The two outer plugs in the pictures have the W underlined. The center plug is in NOS piece.

$30 each PP FF.

This is the fitting that goes next to the brass fitting on four bolt main blocks.

Original translucent Danco stamped rear end vents. The repros have a green cap to them. These both are in very nice condition. $15 each. Ppff (X)

68 through 72 small block steel valve cover rubber grommets. Including 68 Z28 and l79 and all 69 up steel valve covers. The angled valve cover grommet has a concentric ring around it and GF embossed on it. The other valve cover grommet has a concentric ring on the top and AB 131 embossed on the bottom with mold release marks. Excellent original pieces. $35 for the pair ppff.

One year only 69 vented power steering cap in excellent condition. $20 ppff (x) ************SOLD************

Excellent original restored High Performance Small Block crankshaft balancer mounting bolts with safety wire hole. TR head marking. External toothed star washers have the flat ends not pointed. Very nice original pieces. $45 each. Ppff (X)

I just got a couple sets back from the plater of the NOS WITTEK # 10 big block bypass hose clamps. These have never been reproduce correctly. $20 a set shipped to the lower 48 ppff

Exceptionally nice s stamped plates dial distributor hold down clamp and SB head marking bolt. $25. Ppff (X)
************SOLD***********

Excellent restored smog pump pulley bracket bolts with RBW head marking and diverter valve mounting bolts with RSC head marking. As nice as you're going to find. $35. PP FF (x)

Exceptionally nice three-quarter inch heater hose to water pump fitting, long style with notches on corners of each hex. As nice as you'll see. $30. This is correct for short water pump style Motors. Both small and big block.

69 through 74 small block and big block smog pump mounting hardware. All are matched RBW head marking original restored bolts. Long pivot bolt, 2 7/16-14 bracket to block mounting bolts 1 3/8- 16 adjuster Bolt 3 1/4-20 short Pully to pump bolts and 2 diverter valve mounting bolts. Everything is in excellent restored condition. $45 PP FF

Small block high performance 87° water pump bypass fitting. Excellent original restored piece. $30 (X)

Heater hose to alternator retainer. Excellent original pit free restored piece painted black with AS stamping on it and original replated E head marking self-tapping mounting bolt. Excellent condition on all pieces. $35.

************SOLD************

396 427 454 NOS oval Port intake gaskets. Just the fiber gaskets no Rubber end gaskets. Very nice set been laying around for 40 years. $40.

Excellent original restored said of quadrajet carburetor mounting bolts and studs. Studs have dimple on the end and have been CAD plated and the bolts have [] for their head marking and have been plated black. As nice as you'll find. $35 ppff (X)

************SOLD************

Big block and small block oil pressure line 2 block fitting. Extremely hard to find weather headstamp. Most NOS pieces have CP stamped on them this is a very difficult to find assembly line piece. $30 ppff

************SOLD************

Automatic dipstick/modulator mounting clips (awt stamped) $15 each ppff

Spin on oil filter adapter to block mounting bolts. Rbw head marking. Recently replated. Excellent condition. $15. Ppff. (X)

Original 10 bolt rear end rubber brake line to rear end cover mounting bracket and original rbw head marking shoulder bolt for brass block. $20 ppff. Bolt is in excellent condition and the bracket is in excellent condition both have been replated.

Small block steel valve cover grommets. Extremely nice. Both assembly line pieces with manufacturing markings and extrusion markings. Really really nice. $ 35 ppff (X) ************SOLD************

Original assembly line installed black plastic oil pressure switch for cars with idiot lights. Has original date stamping on the underside I have no idea how to decode it. $20. PP FF ************SOLD************

Distributor condenser. This is the condenser that mounts to the coil bracket and goes to the negative wire on the distributor. This is a very nice original piece still has its original ink stamp date code. Which I can't make out :-)

************SOLD************

Part # 1947452

$20 PP FF

The original gates 2 5/16 lower radiator hose tower clamp. Gates did not date their clamps. This is a very nice original piece. The bolt and square not need to be soaked in WD 2 free them up. But not rusty. $40

Big block Camaro and Nova clutch return spring to exhaust manifold stud mounting bracket. I took this off of a low mileage 69 about 20 something years ago. Very very nice very minor pitting and very minor wear from the spring. $50 PP FF

************SOLD************

Original plastic spark plug wire stand looms. $20 each. **********2 SOLD - 5 REMAINING**********

Original free standing 4 hole wire looms. $20 each

Original assembly line installed white stripe vacuum/smog hose. 9-1/2" long. $25 ************SOLD************

Original assembly line installed white stripe vacuum/smog hose. 13-1/2" long. $35

Original assembly line installed white stripe vacuum / smog hose. 18-1/2" long. $45.

Original assembly line installed white stripe vacuum / smog hose. 18.5 inches long. $50